You may have heard of solarization, which is a process where sunlight is completely absorbed by water, resulting in healthier and more vibrant swimming pools. This process can be very time-consuming and requires regular maintenance to keep going. Luckily, there is another method you can use to maintain the natural beauty of your pool without having to worry about the upkeep. This method is called “super chlorination,” and it is a quick and simple way to keep your pool clean and safe for swimming.
What Is Super Chlorination?
Super chlorination is a process where chemicals, such as chlorine and bromine, are injected regularly into the water to maintain its cleanliness. The chemicals help prevent algae growth, make the water more stable, and, ideally, make it safe for swimming. The chemicals can be very dangerous if not used properly, so always make sure that you have the proper equipment and that you know how to use them safely. Otherwise, you could end up harming yourself or someone else around you. Despite the risks, super chlorination is a quick and effective way to keep your pool clean and safe for swimming. In some cases, it can even improve the water quality.
How Does It Work?
When water is exposed to sunlight, it absorbs the light and begins to heat up. If you live in a hot climate where the temperature of the water is not a problem, then the benefits of solarization can be obtained through regular heating. However, if the water is cold, then you have to use other methods to obtain the same benefits. Fortunately, there is a quick and easy way to do this and maintain the natural beauty of your pool without needing to worry about the heat. With cold weather arriving, now is a good time to start using this method. Just mix together a couple of tablespoons of salt, a gallon of bottled water, and a cup of liquid dishwashing detergent. Stir this mixture until it becomes a smooth paste, and then spread it over the surface of the water in your pool. Within minutes, you will start to see tiny bubbles forming on the surface of the water. These are your first signs of success! You can continue adding more salt and detergent as needed to keep the chlorine levels low enough not to offend your eyes or the environment around you. When the weather gets warmer, then you can stop adding chemicals and let the sunlight do the work for you. As long as you take out the salt and detergent mixture in the spring and leave it there until the following summer, then you will avoid most of the problems that come with solarization. When it comes to your health and safety around your pool, then you definitely want to avoid harmful chemicals, and this is why you need to use safe and effective products that are made of natural components.
Why Should You Use This Method?
If you have been searching for a quick and easy way to maintain the natural beauty of your pool without needing to worry about the chemicals, then you have come to the right place. When injected regularly, chlorine and bromine can be very dangerous to humans and the environment, especially if used in excess. While there are risks associated with using these chemicals, there are also many benefits. If you use this method to maintain the health of your pool and its surroundings, then you will be doing the environment a favor and ensuring that your pool can be enjoyed by swimmers for many years to come. In some cases, this method can even improve the water quality. Using this method is quick and easy, and it takes very little effort to keep your pool clean and safe for swimming. In the long term, you will notice how much more pleasant and inviting the water feels in your pool. Regular chemicals additions can result in an unpleasant odor that sticks around for a long time, especially in hot temperatures. This method is much kinder to both the environment and your wallet than regular chemical additions would be. In case you want an overview of the different methods available, check out this article from the Better Homes and Gardens website. They compare and contrast the pros and cons of each method and advise you on which one is the most suitable for your needs.
When Should You Do This?
The question is: when should you do this? There is no set schedule for adding chemicals to your pool. You will notice that some people recommend doing it every three months while others suggest monthly additions. It really depends on how big your pool is and how often you use it. If you use your pool often during the summer months, then you will probably want to do it more often. If you have a smaller pool, then you will have to take it out a bit more often to ensure that the water stays clean. The main thing is that you do this when needed. There is no need to rush – take your time and do it when you feel like it. The worst thing that could happen is that you try to add too much chlorine at one time, and then the pool could become dangerous and have to be closed down. Always make sure that there is not too much chlorine detected in the water when swimming as it could be very harmful.
How Do I Know If It Is Done?
One of the signs you are done is when the water starts to bubble. This is a good sign that the chemicals are breaking down the debris at the bottom of the pool. If you are using an air pump, then you will also start to see bubbles forming at the surface of the water. If you use an electrical pump, then you will see small electric charges as the chemical reaction takes place. In either case, these are the first signs you are approaching the end of your chemical additions and can start taking out what you put in. At this point, you will either need to let the chemicals settle for a couple of hours or gradually reduce the pH level of the water with acid. The time this takes will depend on the size of your pool and how much chlorine your pool has absorbed. Once you have taken everything out, then your pool should look pristine again. It is always a good idea to test the pH level of the water once everything is removed. If this value is above 7.2, then you will have to add some more chemicals to lower it. The ideal pH level for water is around 7.2 and less than 8.4. If this value is above 8.4, then you should either reduce the amount of chemicals you use or change them entirely. Chlorine and bromine are the most commonly used chemicals in pools, and they are easily available at most hardware stores. If you want to know more, then check out this article from the Better Homes and Gardens website that goes into much more detail on this subject. Remember: safety first!