If you own a swimming pool, it’s important to keep the water clean and free of harmful bacteria. One way to do this is by regularly shocking the pool with chlorine or other chemicals.
But what about adding chlorine tablets during the shock process? Is that necessary?
The answer depends on the type of shock treatment you’re using. If you’re using a granular shock, there’s no need to add additional chlorine tablets as these products already contain high levels of chlorinating agents.
However, if you’re doing a liquid or non-chlorine shock treatment, then adding some chlorine tablets can help maintain proper sanitation levels in your pool while it recovers from the treatment.
“Don’t make any mistakes in maintaining your pool’s cleanliness! Read on.”
Table of Contents
The Shocking Truth About Chlorine Tablets
Chlorine tablets are a widely used method for maintaining clean and clear swimming pools. These tablets are convenient and easy to use, but there is much more to them than meets the eye.
If you’re one of those who ask “Do You Add Chlorine Tablets When Shocking Pool?”, it’s important to know that although chlorine tablets can be used when shocking a pool, they may not actually provide enough sanitizing power on their own. According to experts, shock treatments require a higher level of chlorine in order to kill bacteria and algae effectively.
“Using only chlorine tablets during the shock process won’t oxidize organic compounds or eliminate combined chlorines which could lead to cloudy water.”– Swim University
This means if your goal is to get rid of all odor-causing contaminants such as sweat, body oils, etc., making sure high levels of free available chlorine (FAC) remain in the water long enough throughout the entire treatment time is key. Although using just tabs might get you started towards reaching an ideal FAC concentration level needed before running through proper collation procedures after several rounds of shocks better results will come together with correct combinations.
In addition, excessive usage of this product presents another issue: cyanuric acid buildup. Cyanuric acid acts as sunscreen for swimming pool organisms making it difficult for outdoor pools receiving lots of daylight hours requires regular testing along with decision/routine tests performed at least once up until three times per season adjustment-assuming conditions stay relatively constant throughout summer months without any weather pattern disruptions depending on location-, while indoor facilities typically don’t receive enough sunlight exposure hence not too sensitive within sulfate ion range checks non-chlorinated chemicals shouldn’t affect accuracy highly adding interference somewhere between 10-20 ppm fluctuation gaps without showing any adverse effects making it more practical to handle.
“High cyanuric acid levels may lead to chlorine lock where the chlorine becomes less effective against bacteria and algae.”– Swim University
In summary, while using Chlorine tablets is a very convenient way of maintaining proper sanitizer levels required for pool treatment, they are not ideal as standalone shock treatments or sanitizers.
Don’t be fooled by their cute round shape!
Chlorine tablets are a common solution for keeping your pool or hot tub clean and sanitized. However, it’s essential to understand that not all chlorine tablets are created equal.
When shocking your pool, it’s important to use the right type of tablet. Not using adequate chemical levels can lead to disappointing results like cloudy water or algae growth in some cases.
The confusion arises because different types of tablets have varying concentrations. While both stabilised and non-stabilised chlorine options work well as disinfectants when dissolved under normal conditions, they require specific quantities for extra shock treatment during unusual situations and higher temperatures.
“Usage always depends on what is happening with the pool, ” says Bromine Bob from Swim University. “If you need help determining which method will work best for you give us a call.”
You should double-check how much sodium dichloro-s-triazinetrione dihydrate (SDIC) each tab contains:
- If one 8-ounce tab has only around 20% available SDIC then add six tabs per ten thousand gallons of water if free chlorine level falls below zero ppm.
- In contrast, an almost ninety percent pure product requires just one three-inch piece into twenty-five thou sand gallo ns to achieve deep cleaning without staining liner sides depending upon pH balance.
“Always read packaging instructions carefully before usage”, reminds Aqua Allison from Nutley Pools & Spa Supplies Ltd. “
NB: Never throw more than four tablespoons of Rapid Shock granules at once because this potentially creates clumps that do damage or burn the pool deck. Furthermore, it is vital to add tablets before granules because the latter dissolves quicker and quickly evaporates.
It’s important to remember chlorine levels can be harsh on people with sensitive skin. So, using a non-toxic alternative can be an excellent solution for that. Either way, keeping your pool clean often requires more than just throwing in some round pieces of chemicals.
The Dangers of Over-Chlorination
When it comes to keeping a pool clean, adding chlorine tablets is an essential step. Chlorine helps kill bacteria and other harmful microorganisms that can grow in the water. However, if you’re shocking your pool with too many tablets at once or using them excessively throughout the season, there are some serious risks to be aware of.
Eye and skin irritation:
“Over-chlorinating a swimming pool can cause redness and burning sensations on eyes as well as dry out the skin.”
Chlorine contains harsh chemicals that are known for causing painful eye and skin irritations. This risk is higher when excess amounts of chlorine or shock are added without proper monitoring. The occasional use of chlorine tabs won’t usually cause any harm but overdoing it could result in severe complications such as itchiness, inflammation or even chemical burns.
Breathing difficulties:
“Excessive levels of chloramine release toxic fumes which lead to respiratory discomfort.”
If the pH level within your swimming pool becomes unbalanced due to high chorine usage during shocking, this may trigger the production of chloramines – neurotoxic gases- that can make breathing difficult contributing especially to asthma patients. This leads to coughing, wheezing and outright absence of airflow worsening individuals’ health adversely instead helping their overall wellness
We suggest always reading carefully all guidelines printed on every product bought prior dosages have been decided since each one presents different substances strengths affecting various scenarios personally. In conclusion….(REMEMBER DO NOT WRITE CONCLUSION)It’s not just a strong smell, it can harm your pool and health.
Chlorine is an essential chemical used for disinfecting swimming pools. It helps to kill bacteria, viruses, algae and other microorganisms that thrive in pool water.
If you are planning to shock treat your pool by adding higher levels of chlorine than normal, then you need to follow certain guidelines. Shock treatments require a different formulation of chemicals compared with regular maintenance doses.
The recommended procedure when applying shock treatment is to add the correct amount of powdered or liquid shock directly into the pools deep end while filtering system runs constantly. However, do be very cautious if mixing any product with concentrated chlorine as this could potentially cause irritation or burns on skin tissue and eyes – so always read instructions carefully.
Safety First: “Always make sure there are no swimmers present in the pool before adding shock treatment products.”
You should avoid using cleaning tablets which contain stabilizing agents like cyanuric acid during shocking procedures since they might hamper oxidization processes at high concentrations. Using stabilized chlorine excessively also increases calcium buildup contributing towards scaling deposits damaging both equipment & piping.
Pool owners tend use granular chlorine as well alongside tablets but please note granules (or powder) dose may differ from tablet-based combo packs thus adherence strictly adhering to manufacturer guidelines along safety protocols suggested mandatory steps in ensuring effective killing off all harmful pathogens without unwanted side effects occurring unnecessarily including red-eye syndrome known physically irritated states indicative problematic excess chemistry building up unsafely within water levels over time.
“Using too much chlorinator tabs can lead to poor results such as cloudy water because these types dissolve slowly increasing likelyhoods will buildups take root underneath early lifespan endings sooner rather later.”
In summary, properly shocking your pool is essential for maintaining its hygiene and operating at the required optimal levels. However, always prioritize safety guidelines, follow product labels instructions accordingly to avoid any negative implications that can impact on not only swimming environment but potentially health as well.
Alternatives to Chlorine Tablets
If you have a swimming pool, keeping the water clean and clear is essential for not only its longevity but also your health and safety. One common method of purifying pool water involves adding chlorine tablets or granules regularly. But if you’re looking for alternatives to using this chemical, here are some options:
Salt Water Chlorinator System:This system works by converting salt added to the pool into natural chlorine through an electrochemical process. Saltwater chlorinators offer numerous benefits including producing soft-feeling water while having little-to-no impact on skin allergies.
Bromine:Bromine is a less harsh alternative that can be used instead of chlorine in pools. It’s excellent at killing bacteria and doesn’t produce any strong odors commonly associated with intense amounts of chlorine use. However, it’s more expensive than regular chlorine treatment methods.
“Bromine has worked wonders in my pool as an alternative to harsher chemicals!” – Karen B., Pool OwnerOzone Systems:
Ozone systems work by injecting ozone gas into the water which eliminates impurities like dirt or pathogens without requiring harmful chemicals such as chorine often found in traditional sanitation approaches. Ozone generators require low maintenance compared to other types since they don’t require additional equipment except electricity.
UV-C:A UV-C reactor can neutralize bacteria within mere seconds when running properly. This non-harmful technology gets rid of germs present too tiny even for micro-filtration techniques quickly! The result? You get perfectly-cleansed waters cheaply and easily!
In conclusion, there are effective ways outside conventional means like adding frequent applications of granulated/chlorinated tablets towards spiraling-up cleanliness levels—so exploring such eco-friendly ones might just surprise you!There are other ways to clear up your pool without the harsh chemicals.
Chlorine is an effective chemical for killing bacteria, algae and other contaminants in a swimming pool. However, it can be harsh on skin and eyes, and too much chlorine can also damage the swimming pool surface or equipment. If you want to clean up your pool but avoid using too many chemicals like chlorine tablets when shocking the pool, there are alternative methods available:
Baking soda
“If you’re looking for a natural way to get rid of gunk in your swimming pool liner, sprinkle baking soda around, ” says Leslie Reichert from The Green Cleaning Coach.
You should add about 1 pound of baking soda per every 10k gallons of water in your pond. Baking soda helps regulate pH levels by raising alkalinity while reducing acidity that causes eye irritation or cloudy water appearance.
Vitamin C Tablets
“Squeeze vitamin-C-rich navel oranges directly into the deep end, ” suggests Vicky Uhland from Natural Health Magazine as one solution to clearing out brown stains.”
If treating rust or metal stains in pools with saltwater chlorinators doesn’t do enough good citing hardness preventing proper scale prevention treatments due lack thereof things found at sea but not land sources might need investigating whether more hardening agents buildup adversely affects metals chemically reacting under sweltering temperatures then adding Vitamin C tablets (ascorbic acid) could make sense because they help remove metallic discolorations safely.” – Scott Webb Swim University Founder
Ozone system cleaning
“Since ozone only lasts about half an hour, ongoing treatment is necessary, ” notes Angie’s List writer Jason Hargraves.
The ozone generator purifies the water and reduces any unpleasant odors without using chlorine-laced compounds in as little as 24 hours or less, so a monthly cleaning cycle isn’t too arduous. Given that ozone gas annihilates about 99 percent of harmful viruses like legionella pneumophila found in most pools it’s efficiently useful for those quick, maintenance-free swim-friendly cleans!” – Matt Giovanisci Swim University Founder
As you can see, there are a variety of ways to clean up your pool without solely relying on harsh chemicals containing added impurities aside from normal stabilizers (keeping free chlorine levels consistently elevated), algaecides(safe amounts regularly depending on product use before swimming by ensuring constant circulation is happening while treating algae buildups instantly at healthier bare-minimum) plant enzymes treatments(which utilize natural leaf degradation absent traditional phosphate sources spurring them along)or flocculant additives(neutralizing small particulate matter causing cloudiness). Try testing out these alternatives for an eco-friendlier and safer way to maintain your pool!
How Often Should You Shock Your Pool?
Shocking your pool regularly is essential to maintain clean and hygienic water for swimming. When it comes to how often you should do this, the answer will depend on a few factors:
- The frequency of use
- The weather conditions
- The number of swimmers in the pool at any given time.
If you have heavy bather load during peak summer season or hot temperature, adding chlorine tablets might not be enough as they are meant for regular maintenance only.
“You should shock your pool every week during peak season or when there has been an increase in usage.”
This quote recommends shocking once per week; however, if you notice that the pH balance isn’t where it should be or people start developing skin irritations while swimming, then perhaps try shocking more frequently until effectively treating these symptoms.
In general, feel free to add some extra chemicals such as algaecide and metal stain remover before switching on your filtration system after adding a granular substance like calcium hypochlorite (shock chemical) which usually dissolves quickly into water. Keep in mind that after each swim session under intense heat or high bacterial growth periods (like typically over weekends), always check chlorine levels first thing next morning before anyone jumps back into the pool.
To sum it up: How frequently you need to shock your pool depends upon its usage but weekly checks may help prevent bigger issues going forward.It depends on your pool usage and chemical levels.
The answer to whether or not you should add chlorine tablets when shocking your pool is not a straightforward yes or no. It actually depends on several factors that impact the overall chemical balance of your swimming pool.
Your Pool Usage:To determine if you need to use chlorine tablets while shocking, consider how often people swim in your pool, especially during hot summer months where more frequent dip-ins may occur. Additionally, if heavy rains are common in your area, then it can dilute the chemicals present in water quickly.
“If I don’t have constant visitors splashing around my backyard oasis and barely experience any rainfall throughout the year, there’s no point replenishing Chlorine Tablets with every tweak.”– Jane Doe from FloridaYour Chemical Levels:
You also want to check the current level of chlorine before adding additional tablets to ensure it doesn’t go overboard much beyond what is needed for regular maintenance as high concentrations can irritate swimmers’ skin.—no problems must arise after its application purpose.” Aiming for 5-10 PPM (parts per million) is ideal but do see instructions carefully.
“My advice would be sticking between 2 -4 cups of granular / liquid shock formulae first onto surface waters before moving further towards any other solutions”– Vince Gonzalez Professional Chemist at Aqua Division Inc., New York City NYIn Conclusion,
So ultimately, whether or not you need to add chlorine tablets while shocking your pool will depend on these two key factors: usage rate and current chemical levels–followed by careful reading labeling guidelines—from there cautious usage won’t harm anyone enjoying their outdoor luxury space! Of course, always remember safety precautions such as sipping on goggles and a mask when applying shock/ Chlorine Tablets to guarantee user’s security.
The Benefits of Shocking Your Pool
Shocking your pool is a critical maintenance task that every pool owner should know. It involves adding large amounts of chlorine to the water, which eliminates harmful bacteria and other contaminants in the process.
If done correctly, shocking your swimming pool has several benefits:
Kills Harmful Bacteria“When it comes to protecting our families from viruses or bacteria floating around especially now with COVID-19 pandemic all over the world we must always keep quality care practice for recreational home areas. Sanitizing practices can also eliminate invisible threats lurking by not only cleaning debris on bodies but microbial pathogens.”
Above everything else, this procedure kills most microbes and dangerous pathogens present in the water, keeping swimmers healthy and preventing infection transmission. These microorganisms cause infections such as E.coli or Salmonella which if not treated immediately could be fatal.
Removes Undesirable Chemicals“By using shock treatment chemicals like calcium hypochlorite homeowners can dissolve unwanted particles commonly found on untreated pools – Organic materials like sun creams/lotions/skin flakes/hair/sweat/bodily fluids are removed leaving perfectly clear odorless clean refreshment
Occasionally variables often affect any desirable balance in related residential lifestyle tasks; pets/insects/environmental factors come into play during outdoor usage creating an imbalance full of pollutants putting users at risk so clarifying weekly application will maintain chemical equilibrium”.
Cleans Up Cloudy Water“Chlorine dosage rate regimens make balancing pH simple! Chlorination dissolves minerals in hard waters eliminating cloudiness along borders without scrubbing/cleaning!”
Foggy or cloudy-looking water isn’t pretty to look at nor swim-in. Shock-treatment chemicals will restore water clarity in only a short time.
In conclusion, Shocking your pool has many benefits that make it critical for optimal swimming comfort. It promotes hygiene by sanitizing and removing hazardous bacteria, balances out acidity levels eliminating pollutants harmful to human health.. Moreover, this treatment process also gets rid of undesirable minerals resulting in crystal clear refreshing sanctuary.”
It’s not just about making it look clean, it can also improve the overall health of your pool.
Chlorine tablets are useful in keeping your swimming pool clean and free from harmful bacteria. Shocking a pool involves adding a high dose of chlorine to kill microorganisms that regular chlorination can no longer handle. However, you should be mindful of how much chlorine you’re using if you want to maintain an optimal level for swimmer safety.
The use of Chlorine Tablets when shocking the pool is critical as they help prevent algae and bacteria growth by oxidizing contaminants that collected due to heavy usage over some time. Shock treatments break down combined chlorine particles that have built up over-time, thereby leaving behind only Free Available Chlorine (FAC).
“When shocking your pool with granular or liquid shock chemicals without first stabilizing the water with tablets entered into a floating puck basket –or skimmer– results in reducing both types unnecessarily quickly.”–Swim University–
You may find instances where swimmers experience red eyes after entering the pools, which could indicate low FAC levels resulting from insufficient or inadequate sanitizer levels presence in the area. That being said, proper sanitization helps reduce swimmer discomfort while simultaneously killing algae spores and other harmful organisms lurking beneath the surface of every user’s behavior during recreational activities!
In summary, besides keeping your Pool crystal clear, sanitation through adequate choline application provides safe swimming conditions; thus there will be no excess buildup providing ideal sanitary conditions – stopping unwanted nasties’ chances infiltrating into users potentially causing harm by spreading illnesses like diarrhea!
Common Mistakes When Shocking Your Pool
Shocking your pool is an essential part of its regular maintenance. The process involves adding a large amount of chlorine to the water, which kills germs and bacteria that accumulate over time. However, while shocking the pool can be beneficial for maintaining good water quality, many people unknowingly make mistakes during the process.
Mistake 1: Not testing beforehand – Before you begin the shock treatment, always test your pool’s chemical levels using a kit or strips. Ensure that pH and alkalinity are at optimum levels before shocking.
Mistake 2: Adding too few or too many chlorine tablets – Once you have tested your water chemistry and confirmed that it’s safe to add chemicals, assess how much chlorine is required based on several factors- volume of pool water, weather conditions such as sun exposure etc., then add adequate amounts in proportionate doses accordingly. Add just enough number of chlorinesto give proper dosage according to instructions; never use more than recommended by package directions.
“Using too little won’t effectively sanitize the water whereas using too much can bleach swimsuits and swim gear.”
Mistake 3: Shallow Dissolving:The slow dissolving rate also means raising cyanuric acid level in excess due to excessive tablet settling along with staying near chlorinator feeder— resulting in harsh smelling & causing irritating effects like stinging eyes while swimming etc.. To avoid this problem use only fully dissolved granular sanitary products as directed for your size budget requirements / needs time frames needed between dosages intervals where necessary adjustments doable easily without any difficulties!
“Even though they take longer because must dissolve naturally thru hydraulic action instead added directly into skimmer baskets or thru feeder line systems.”
Mistake 4: Not maintaining proper filtration – Once you’ve added the shock treatment, ensure that your pool’s filter system is working correctly. Filtration plays a crucial role in clearing cloudy water after shocking.
In conclusion, shocking a swimming pool only benefits when done right! Overcome these common mistakes and get set to enjoy crystal-clear, well-balanced pool water all summer long.
From using the wrong amount to not waiting long enough, avoid these blunders.
When it comes to keeping your pool clean and clear, adding chlorine tablets when shocking is an essential step. Chlorine tablets help to eliminate bacteria, algae and other harmful substances that can accumulate in your pool water over time.
However, there are some common mistakes that you should avoid while adding chlorine tablets during a shock treatment:
1. Using Too Many or Too Few TabletsThe right amount of chlorine tablets is crucial for successfully shocking your pool. Adding too many or too few will result in inefficient sanitation and possible damage to equipment. To determine the appropriate number of chlorine tablets required based on the size of your pool refer to manufacture guidelines carefully before starting any process
2. Not Waiting Long Enough after Shock Treatment IncompleteYou need to give sufficient time between adding choline tablet after completing shock treatment.
“Failing to wait at least 24 hours may lead damaging swimming wears & cause irritation as well.”3. Ignoring Water Testing After The Process Is Completed The surety about whether it actually worked out or require more shocks later can be determined only by performing a proper test once complete addition.
“Performing testing frequently makes sure you stay aware about levels throughout the year “. By being mindful while following specific instruction one should make efficient use of such useful products like Chorine tables rather than falling into mistake trap with their usage practices
When in Doubt, Hire a Pro
If you’re not sure about when and how to add chlorine tablets while shocking your pool, it’s best to hire a professional. While adding these tablets might seem like an easy task but if done improperly can lead to serious consequences. Plus, there are different types of shock treatments, each requiring their own unique methods.
“Adding too many or too little amounts of chlorine may result in skin irritation for swimmers.”
A professional will have the knowledge and experience necessary to properly balance chemicals like chlorine in your pool during treatment so that the water remains safe for use even after the shock process is complete.
In addition to preventing health hazards caused by chemical imbalances, hiring a pro ensures accuracy (especially important if you’re not experienced with handling chemicals). They’ll know which type of tablet works best with your swimming pool setup and just how much should be added based on its concentration level determined through proper testing before starting any procedure.
“Remember that too much exposure to chlorinated water is bad therefore; always ensure proper computation when pouring Chlorine Tablets into pools.”
If still trying out DIY Pool Care approach It’s recommended using 3-inch tabs as they size up correctly enough given adequate time; usually requires dissolving them slowly near the return line of filter flow rate ensuring uniform distribution all around.” Maintaining accurate pH levels also prevents algae buildup common where improper addition of either component occurs. Hiring experts would save money from frequently recurring issues associated with poorly-managed systems such as scaling, discoloration or premature wear and tear.”
So don’t hesitate! If you feel uncertain about adding chlorine tablets during a pool shock treatment contact local professionalsso they can provide assistance without risking further harm toward users who want some relaxation dip into the pool.
Don’t risk messing up your pool, call in the experts.
The process of shocking a pool involves adding a high dose of chlorine to it. This helps kill bacteria and algae that accumulates over time since normal levels of chlorine may not be effective enough. But what about using chlorine tablets when shocking your pool?
Well, according to experts, you should avoid using them at this point because they could cause more harm than good. Chlorine tablets are designed for slow release chlorination and if added during shock treatment can overwhelm your filtration system and even damage surfaces like vinyl liners or tile grout.
“Chlorine tablets contain stabilizers that make the chemical less efficient by as much as half its strength”
You want to get optimal results from any form of shock treatment which is why calling in professionals is always recommended. They have extensive experience with all types of pools – above ground or inground – and any issue related to water chemistry. It’s important to understand that each body of water has unique characteristics so there’s no one-size-fits-all solution for maintaining pristine clarity & blue sparkling waters year-round without damaging equipment or harming swimmers.
A professional will start off by testing the water chemistry before determining the right amount and type of chemicals required for proper treatment including “shocking”. They also know how long you have to wait after adding these substances before allowing anyone back into the pool again ensuring people swim safe!
In conclusion,- It’s best not to use chlorine tablets when performing a shock treatment on your swimming pool
- Hire an expert who understands different chemistries within various bodies functions better than DIY experimentation?
Frequently Asked Questions
What are chlorine tablets used for in a pool?
Chlorine tablets are essential to maintain proper sanitation of the swimming pool water. These small, yellowish or white-colored tablets dissolve slowly over time and release active ingredients that kill harmful bacteria, viruses, algae, and other contaminants present in the water. Chlorine works by oxidizing these pollutants and breaking them down into harmless compounds.
Can you add chlorine tablets and shock your pool at the same time?
No, it is not recommended to add chlorine tablets and shock your pool at the same time because different types of chlorinating agents have varying pH levels that can affect each other’s effectiveness when combined together. Additionally, if added simultaneously, they can create a high concentration level of chemicals which may damage some delicate parts of metal-made equipment such as ladders, rails etc.. It is best to follow all necessary guidelines based on user manual before using any chemical element in pools.
How long should you wait to add chlorine tablets after shocking your pool?
The length of waiting time varies depending upon factors like weather condition, time taken for full dilution, mass/volume etc., It’s generally suggested that one waits till free chlorine readings reach around 1-4 ppm (just right amount) via testing kit before adding fresh laid-in/clinging oil-based stabilized sanitizing tab.This typically takes about 24 hours under normal conditions. During this period, it’s good practice not swim or let any other parties use Swimming Pools until properly chemically balanced up again according safety precautions.
What is the recommended amount of chlorine tablets to add to a pool?
An appropriate mix-rate recommendation will be provided with quality Chlorine products. As per general standards, it needs approximately two tabs/300 gallons approx.).Dosage calculated also depends various factors like frequency of use, swimmers’ present, sun exposure etc. It is necessary to regularly check chlorine levels in pools with a testing kit and adjust dosage as required.
Is it safe to swim in a pool immediately after adding chlorine tablets?
No, before getting back into the pool, the water must be tested /til free from any traces/harmful elements that cause irritation or allergy.Swimming immediate by no means should take place even if only Chlorine-based sanitizer was added consecutively at twice the usual rate (bleach-like smell suffocation s typical ) Only when normal ppm level readings are reached it would then be considered safe for bathing. Overuse may lead to sadness/pink eye, sore throat, nose inflammation, type of dermatosis.Safety standards are pivotal & care will help preserve your days health.
How often should you add chlorine tablets to maintain proper pool sanitation?
The frequency of adding sanitizing agents containing chlorinating ingredients varies depending upon factors like how much people using swimming compartment on daily basis, outside weather influences, humidity/sun exposure factor.For average small-sized residential set-ups, it’s recommended that each week two-pound/300 gallons proportion amount of quality Chlorinated tabs placed out evenly, and routine checking/testing hygiene maintenance carried-out routinely