Did you know that having a clean pool is as important as having a clean house? It is! Keeping your pool clean is a lot of work, but it’s worth it. You’ll be glad you did it once you’ve had a nice swim.
Most home pools are cleaned by swimmers when they use them. Meaning, when you’re done swimming you just leave the pool cleaner on while you go into the shower. When you return, the pool will be clean!
However, there are a few things you need to do before you can enjoy your pool. The first step is to vacuum it thoroughly before each use. This helps keep the dirt and debris from building up during use, which could potentially affect the water quality.
Now, it’s important to note that while you are cleaning your pool, you also need to be aware of any signs of trouble. For example, if you notice any spots of algae growth or if the water is looking a little cloudy, you should contact your local pool maintenance service right away. They will be able to help you figure out what is causing the problem and how to address it quickly and correctly.
It’s also important to remember that different types of water may require different cleaning protocols. The general rule is: the cleaner the water, the quicker it will clear up after use. When you’re not sure what type of cleaner to use or how often you should be cleaning it, ask your local pool service for help.
Table of Contents
Vacuum It Before Each Use
Before you can swim in your pool, you need to vacuum it first. Run a clean pool for around 10 minutes while you vacuum it. Then, open it and enjoy your swim. Remember: always clean your pool before you leave it. This will ensure the water is clear and nice and save you from any unpleasant surprises when you’re back in the future!
Here’s why you need to vacuum your pool: every time you use it, a little bit of dirt and debris floats to the surface. While this isn’t harmful, it does make the water look a little cloudy. Also, algae growth in the water can cause it to smell a little bit like feces. Neither of these are very pleasant sensations if you’re swimming or planning on swimming in the pool!
Before you know it, that little clump of dirt will have formed a ring around the base of the pool. This is where you’ll find the most visible debris. As you continue to use the pool, this ring will continue to form until it’s about an inch from the surface of the water. Once this threshold is reached, it’s time to vacuum it again!
Add Some Chemical To The Water
Adding a little bit of chlorine to the pool water can help keep it clean and clear. However, don’t add more than a certain amount or you’ll end up with an unhealthy pool. For best results, test the water frequently with a swimming pool test kit. Some pools need more chlorine than others, so be sure to check the instructions that come with the kit to find out how much to add (in terms of both time and concentration).
Test The Water Frequently
When you’ve cleaned your pool and added some chlorine, it’s time to test it frequently and accurately. Testing the water ensures you know what’s in it and if any changes have occurred since your last clean. Also, make sure to test the temperature of the water. Home pools are usually kept at a steady 68 degrees Fahrenheit, which is perfect. However, if the water is consistently above or below this temperature, it can be a sign of an issue.
Maintain Clean Surfaces
Keeping your pool clean is a lot of work, but it’s worth it. You need to remember to clean it regularly and thoroughly. This means washing down the sides and bottoms of the pool with water, plus scrubbing the inner walls and skimmers in the same manner.
Scrubbing the pool is a pain, so make sure you have the proper tools for the job. If you don’t have a pool scrubber, invest in one. These tools make cleaning the pool much easier and faster. They also allow for safer and more accurate scrubbing.
Additionally, maintain clean surfaces by ensuring there are always some towels available to dry off after swimming. You should also avoid placing any furniture or decoration near the pool. This could potentially cause the water to become stained or discolored.
Watch For Any Visible Changes
If you’ve been keeping your pool clean for some time and haven’t noticed any changes, it’s time to be a little worried. This could mean one of two things: either the pool is contaminated or it’s time to clean it again!
To determine what’s causing the problem, isolate it by taking the pool out of service for a while and inspecting it. If you determine it’s time to clean it again, follow the steps above to vacuum it and clean it with chlorine. If this doesn’t help, it could be time to change the water altogether.
Once you’ve had a swim and cleaned it, don’t just rinse off and leave. Instead, remove all wet clothing and gear, especially if you’re going into the shower. This ensures any residue left on the skin from the chlorine is washed away before any water is exposed to the air. Also, make sure to scrub any surfaces that were near the water before washing them.
If you’ve been keeping your pool clean and pristine and have noticed no changes, you can be confident it’s safe to continue using it. However, if you’ve seen any changes (such as a ring forming around the base of the pool or sudden algae growth), it could be time to clean it once more.
Ensure your pool is always clean! It’s very easy to accidentally contaminate your pool without knowing it. This can happen if you swim in it while it’s still dirty, if you use a dirty cloth to clean it, or if you touch any surface near the pool when it’s contaminated.
Make sure you’ve cleaned all the areas around and under the water before using it. Also, clean any surfaces you come in contact with to ensure the water stays clean. This includes the pool itself, as well as any equipment (such as shower chairs) or toys (such as noodles or straws) near the pool. Remember: if it’s not cleaned properly, it could potentially become contaminated with bacteria or viruses, which could make you sick!
Vary The Timing
It’s important to vary the timing of when you vacuum the pool to ensure the dirt and debris isn’t sucked into the motor. Some pool cleaners have vacuum modes, which means they will automatically suck up the debris as you vacuum. It’s important to remember that this device is going to be connected to your wall vacuum by a long tube, so make sure you don’t put it on top of any furniture or other items near the wall! This also means you should only use this mode when you’re cleaning the pool and not at any other time. Doing this causes the least amount of wear and tear on your vacuum and ensures it operates at its best possible condition. This, in turn, ensures the pool stays clean.
Use The Right Tools
It’s important to use the right tools for the job when cleaning your pool. If you don’t have the right tools, it can be extremely difficult to do the job properly. Also, make sure to purchase the proper tool for the specific pool you have. Some pools require more than one tool and/or more than one type of tool.
Thoroughly Dry Off
After you’ve had a swim and cleaned the pool, don’t just rinse off and leave. Instead, remove all wet clothing and gear, especially if you’re going into the shower. This ensures any residue left on the skin from the chlorine is washed away before any water is exposed to the air.
However, make sure you dry off all the surfaces you’ve cleaned, including the pool itself. This will ensure any residue left from the chlorine is thoroughly washed away before any water is exposed to the air. It’s also important to remember that even after you’ve cleaned the pool, it’s still damp around the edges. This is because water is a better conductor than air, so even after all the surfaces are dry, there will be some moisture in the air hovering around the pool. To ensure this doesn’t become an issue, make sure to cover the pool whenever it’s not in use or when the weather is damp. This keeps harmful bacteria from growing.