Welcome to our ultimate guide on how to properly empty your 12ft Bestway pool. As summer comes to an end, it’s time to prepare for winter and store your pool away safely. To ensure your pool stays in top condition for years to come, it’s essential to drain it properly. In this article, we will cover everything you need to know to safely and efficiently empty your pool.
Draining a pool may seem like a simple task, but if not done correctly, it can lead to serious damage to your pool and its components. Our step-by-step guide will walk you through the process, so you can rest assured that you’re doing it right. We’ll also provide you with some pro tips and tools to make the process a breeze.
Don’t risk damaging your 12ft Bestway pool by taking shortcuts or using improper techniques. Keep reading to learn everything you need to know to safely and effectively drain your pool.
Table of Contents
Step-by-Step Guide to Draining Your 12ft Bestway Pool
Draining your 12ft Bestway pool is an important maintenance task to keep your pool in top condition. It is recommended to drain and refill your pool every two to three months to keep the water fresh and clean. Follow these simple steps for a stress-free draining process:
Step 1: Gather your equipment
Before you start draining your pool, gather all the necessary equipment. You will need a submersible pump, a hose, and a nearby drainage area. Make sure the drainage area is free of any plants or animals that could be harmed by the chlorinated water.
Step 2: Turn off the power supply
Turn off the power supply to the pool’s filtration system before you begin the draining process. This will prevent any damage to the system and ensure your safety.
Step 3: Connect the hose to the pump
Connect the hose to the submersible pump and place it in the center of the pool. Make sure the pump is fully submerged in the water to avoid any damage to the motor.
Step 4: Start the pump
Plug in the pump and turn it on to start draining the water. Keep an eye on the pump to ensure it is working correctly and the water is draining at a steady pace.
Step 5: Monitor the water level
Once the water level reaches about 1-2 inches, turn off the pump and disconnect the hose. You can then use a bucket or a wet/dry vacuum to remove any remaining water at the bottom of the pool.
Follow these simple steps to properly drain your 12ft Bestway pool. With a little patience and attention to detail, you can keep your pool in top condition and enjoy it for years to come.
Shut off the power supply to the pool.
Locate the power switch or breaker box that supplies electricity to the pool. It’s usually found near the pump or in the basement of your house.
Switch off the circuit breaker or turn off the power switch that controls the pool’s pump and filtration system.
Disconnect the power cord that connects the pump to the power outlet. If you have an extension cord, unplug it from the power source.
Turn off any pool lights or accessories that are powered by electricity.
Wait for a few minutes to allow the pump to stop running and the water to settle.
Make sure to double-check that the power supply is off before proceeding with draining your pool. Safety should always be your top priority.
Attach a hose to the drainage valve.
Once the power supply is off, locate the drainage valve at the bottom of the pool. Attach a garden hose to the valve and make sure it is secure.
Pro Tip: Before attaching the hose, make sure that the end of the hose is lower than the pool’s water level. This will ensure that the water flows out smoothly without any obstruction.
Next, place the other end of the hose in a location where the water can drain without causing any damage to the surrounding area. Make sure the hose is not kinked or twisted, as this can slow down the drainage process.
Important Note: If you are draining the pool for maintenance or cleaning purposes, avoid draining the water onto plants or grass as the chemicals in the pool water can damage them. Instead, drain the water into a sewer or drain.
Once the hose is securely attached and the drainage location is set, open the valve to begin draining the water. Depending on the amount of water in the pool, this process can take several hours.
Pro Tip: To speed up the drainage process, use a pool pump or a wet/dry vacuum to remove any remaining water once the water level is low enough.
Effortlessly Remove All Water from Your 12ft Bestway Pool
Emptying your 12ft Bestway pool can be a daunting task, but with the right tools and techniques, it can be done effortlessly. Here are some tips to help you remove all the water from your pool in no time.
Use a submersible pump. A submersible pump is an excellent tool to have when draining your pool. It can easily pump out large amounts of water quickly, saving you time and effort.
Create a siphon. Another option is to use a garden hose to create a siphon. Submerge one end of the hose in the water and place the other end outside of the pool. Once the water starts to flow, it will continue to drain until the pool is empty.
Rent a water pump. If you don’t have a submersible pump or don’t want to use a siphon, you can rent a water pump from a hardware or home improvement store. This can be a more expensive option, but it can save you time and effort in the long run.
Use gravity to your advantage. If you have a slight slope in your yard, you can use gravity to help drain the pool. Position the drainage hose at the lowest point in your yard, and the water will flow out of the pool and down the slope.
Consider using a wet/dry vacuum. If you have a wet/dry vacuum, you can use it to remove the last remaining water in your pool. This can be a time-consuming option, but it will ensure that all the water is removed from your pool.
Use a pool cover pump to remove water quickly.
Step 1: Choose a pool cover pump that is appropriate for your pool’s size and depth.
Step 2: Place the pump on top of the pool cover, ensuring that it is centered and level.
Step 3: Connect the pump to a power source and turn it on, allowing it to suck water from the cover and into the pump’s hose.
Step 4: Monitor the pump’s progress, and turn it off when the water level is low enough to safely remove the cover.
Step 5: Carefully remove the pool cover, folding it neatly and storing it in a dry, safe location.
Using a pool cover pump is an effective and efficient way to remove water from your 12ft Bestway pool, especially if you are dealing with large amounts of water or need to remove it quickly. By following these steps, you can keep your pool cover and your pool in top condition.
If you’re looking for a simple and effective way to completely drain your 12ft Bestway pool, tilting it to one side is a great option. Here are the steps:
Step 1: Turn off the power supply to the pool.
Step 2: Use a pool cover pump to remove as much water as possible from the pool.
Step 3: Once the water level is low enough, tilt the pool to one side by lifting it up on the opposite side. Make sure you have a few people helping you to do this, as the pool can be heavy.
Step 4: Wait for the remaining water to drain out. You can use a pool brush or broom to push the water towards the drainage valve to speed up the process.
Step 5: Once all the water has drained out, tilt the pool in the opposite direction to make sure any remaining water is removed.
Tilting your 12ft Bestway pool to one side is a quick and easy way to completely drain it. Just make sure you have enough people to help you and that you take the proper precautions to avoid damaging your pool or hurting yourself.
Pro Tips for Safely Emptying Your 12ft Bestway Pool
Check local regulations: Before draining your pool, check with your local authorities to ensure you are not violating any regulations related to water usage and drainage.
Don’t drain your pool on a slope: Avoid draining your pool on a slope, as this can cause soil erosion and flooding in your yard.
Avoid draining pool water into storm drains: Do not drain pool water into storm drains, as this can introduce chemicals and other pollutants into the environment. Instead, drain the water onto your lawn or garden.
Wear protective gloves and footwear while handling the drainage hose.
Draining your pool can be messy and even dangerous, especially if you’re not careful. To protect your hands and feet from potential cuts and scrapes, always wear protective gloves and footwear while handling the drainage hose.
Choose a safe and appropriate location to drain the water. Avoid areas where water can damage property or cause erosion. It’s also important to make sure the drainage location is safe for children and pets.
Be mindful of the environment. Chlorinated water can be harmful to plants and animals. Consider draining the water into a sewer system or contacting your local water treatment facility for advice on how to safely dispose of the water.
Choose a location: Before you drain your Bestway pool, make sure you have a suitable location for the water to drain to. Choose an area with good drainage, such as a storm drain or a garden bed with adequate slope.
Avoid soft or sloping ground: Don’t drain your pool onto soft or sloping ground as it can lead to soil erosion, mud, and damage to the surrounding landscape. Look for a flat, level spot.
Use a drainage hose: Attach a drainage hose to the pool’s drainage valve and direct the water to the chosen location. This prevents the water from pooling around the pool and causing damage to the pool’s frame and foundation.
Keep Your Pool in Top Condition by Properly Draining It
Regular draining is important to keep your pool in top condition. It helps to remove any build-up of minerals and chemicals that can cause damage to the pool over time.
Check the manufacturer’s instructions to see how often you should drain your pool. Some manufacturers recommend doing it every three to five years, while others suggest doing it once a year.
Use the right tools to drain your pool properly. A pool cover pump or a submersible pump can make the job easier and more efficient.
Dispose of the water properly. Make sure to follow your local regulations when disposing of the water. In some areas, it’s illegal to drain pool water into the sewer system, while in others, you may need to treat the water before disposing of it.
Drain your pool at least once every three months.
Regularly draining and cleaning your pool is crucial to maintaining its longevity and preventing costly repairs. To keep your pool water clean and healthy, it’s recommended to drain and refill it every three months or so.
When draining your pool, make sure to follow proper safety precautions and dispose of the water in an environmentally friendly way. Consider using the water for irrigation or other non-potable purposes, or contact your local pool service company for proper disposal.
If you notice any issues with your pool, such as excessive algae growth or cloudy water, it may be necessary to drain it more frequently. Consult with a pool professional to determine the best course of action for your specific pool.
Remember, a little maintenance goes a long way in keeping your pool clean and functioning properly. By regularly draining and cleaning your pool, you can enjoy a refreshing swim all season long.
Scrub the walls and floor: Use a pool brush and pool cleaner to scrub away any algae, dirt, or debris on the walls and floor of the pool. This will help prevent any bacteria from growing in the pool while it is drained.
Rinse with a hose: Use a hose to rinse the pool walls and floor thoroughly, removing any remaining dirt or debris. Make sure to rinse away any pool cleaner or chemicals you may have used during the scrubbing process.
Let the pool dry: After rinsing, let the pool dry completely before refilling it. This will help prevent any mold or mildew from forming on the walls or floor of the pool.
By following these steps, you can ensure that your pool is clean and ready for use when it is refilled. Taking the time to properly clean the pool before refilling it will help prolong the life of the pool and keep it looking great for years to come.
Before refilling your pool, it’s essential to inspect it for any leaks or cracks. This step will save you from future headaches and costly repairs. Here are some tips to help you check for any damages:
- Visual inspection: Look for any visible signs of damage like cracks, bulges, or holes in the pool walls or floor.
- Pressure test: Close all the valves and fill the pool with water to a level above the suspected damage area. Monitor the water level for 24 hours to see if there are any noticeable drops.
- Dye test: Put food coloring in a bucket of water and pour it around the suspected leak area. If the dye is pulled into the crack or hole, you have located the damage.
If you discover any damages, it’s best to repair them before refilling the pool. Patching up small cracks and leaks is relatively easy and can be done using a pool repair kit. For more extensive damage, it’s best to call a professional pool repair service.
The Best Tools and Techniques for Emptying Your 12ft Bestway Pool
If you own a 12ft Bestway pool, it’s important to know the best tools and techniques for safely and efficiently emptying it. Here are some tips:
Siphon Hose: A siphon hose is one of the easiest ways to drain your pool. Simply submerge one end of the hose in the water and suck on the other end until the water starts flowing out. Be sure to keep the end of the hose that was in the pool higher than the end that is outside to keep the flow going.
Electric Pump: An electric pump is another efficient option for emptying your pool. It’s best to use a pump with a filter to prevent any debris from getting into the pump and clogging it. Follow the manufacturer’s instructions for using the pump and make sure it’s suitable for use with your pool.
Drain Valve: Many Bestway pools come with a drain valve that can be attached to a garden hose for easy draining. Simply attach the hose to the valve and open it to start draining the water. Make sure the hose is long enough to reach a safe drainage area.
By using these tools and techniques, you can safely and efficiently empty your 12ft Bestway pool, keeping it in good condition for years of use.
Use a submersible pump for faster drainage.
If you want to speed up the process of emptying your 12ft Bestway pool, using a submersible pump is the way to go. This type of pump is designed to be placed in the pool and will quickly pump out the water.
Make sure the pump is placed in the center of the pool for maximum efficiency. Also, be sure to read the manufacturer’s instructions and safety precautions before using the pump.
Once the pool is drained, remove the pump and clean it thoroughly before storing it for future use.
Frequently Asked Questions
What equipment do you need to empty a 12ft Bestway pool?
Emptying a 12ft Bestway pool requires a few tools including a submersible pump, a drainage hose, and a place to drain the water.
How do you prepare the pool for draining?
Before draining the pool, it’s important to turn off the pump and filter, remove any debris or leaves, and lower the water level to a few inches below the skimmer.
What is the best technique for draining a 12ft Bestway pool?
The best technique for draining a 12ft Bestway pool is to use a submersible pump which can pump out large volumes of water quickly and efficiently.
How long does it take to drain a 12ft Bestway pool?
The time it takes to drain a 12ft Bestway pool depends on several factors such as the size of the pool, the amount of water in it, and the power of the submersible pump. Typically, it can take anywhere from a few hours to a full day.
How do you dispose of the water after draining the pool?
It’s important to ensure that the drained water doesn’t damage your yard or cause flooding. The best way to dispose of the water is to direct it towards a sewer or drain in your yard, or to use it to water plants or lawns.
When should you empty a 12ft Bestway pool?
You should empty a 12ft Bestway pool at least once every three months to prevent bacteria and algae buildup. You should also drain the pool if the water becomes too dirty or contaminated, or if you need to repair any leaks or cracks in the pool.