How Do I Get Salt Water Into My Pool? [Fact Checked!]

Spread the love

There’s no question that salt water is one of the most popular pool additives. So much so that it’s almost considered a necessity for most home swimming pools. Why? It’s simply because salt water adds life to any pool. Even better, when mixed with water, it is considered safe for everyone (even small children) to be near the pool area. What’s important is that you know how to get the most out of your tubs and get the party going!

The Benefits Of Adding Salt To My Pool

Let’s start with the basics. What exactly is salt water? Well, it’s nothing more than fresh water with salt added to it. You might add a pinch of salt to your ocean waves to make them more appealing. The same goes for your pool. Why? It just makes everything more fun! Swimming in salt water is a must for every animal. It helps them detect food in water. For humans, eating saltwater adds a touch of flavor to otherwise bland food. And last but not least, having saltwater in your pool can make it more appealing to potential swimmers. Who knows? Perhaps this article will even convince you to swim in your very own backyard pool.

Now that you’re all caught up on the basics, it’s time to look at how you’re actually going to add saltwater to your pool. As you might imagine, there are many different ways to do this. And if you want to be thoroughly organic, you might try using rainwater tanks or filtered wells. But for the sake of this article, we’re going to discuss one of the simplest and most effective methods of adding saltwater to your pool. So, let’s get started.

How Do I Get Saltwater Into My Pool?

If you’re using a traditional pool with no screen around it, then you simply need to drill a few large holes in the side of your pool. The purpose of these holes is to allow the saltwater to seep in. So, rather than directly adding saltwater to your pool, you’re going to allow it to percolate through the soil and plants around the outside of your pool. This way, you ensure that your pool is always doused in fresh water. Even if you have the wettest season on record, your pool will still be fresh and clean. Plus, the natural salt in the water is going to keep your pool at its optimum temperature. So, while there are many ways to add saltwater to your pool, this one way is by far the simplest and most effective.

Now, before you begin, make sure that you secure the area around your pool. This means preventing animals and kids from falling into the hole while it’s being drilled. Otherwise, you might end up causing a serious accident. This is always a danger when working with sharp objects around water. So, ensure that all household members are aware of this fact and keep an eye out for children.

How Long Does It Take For Saltwater To Percolate Through The Soil?

The timeframe here is important. You want to make sure that the water you’re adding is fresh and has not been sitting around for too long. Ideally, you want to add it within the first hour of turning on your pool. Wait a little while before starting your next step. The water should be visibly infused with salt by the time you’ve finished your steps. You’ll know it’s been there for a while because you’ll begin to notice the difference in the taste of your pool water. Plus, if you’ve followed the guidelines above, you’ll know that the water in your pool is going to be safe for your kids and pets.

What Size Holes Should I Make?

Just like with any other project, you want to start small and gradually increase the size of the opening as you gain experience. For the sake of this article, you’ll want to begin with either ½ or ¾ inch holes. These sizes will allow the most inflow while still being relatively easy to drill. As you get more confident, you can move on to larger holes. So, rather than rushing into a 5 inch hole and having to enlarge it later, take your time with smaller holes. Besides, you might hit a few snag along the way and have to go back and enlarge the hole. This is part of the learning experience. You should never feel rushed into doing anything. Take your time and do it right the first time around. This is especially important when working with a pool. You don’t want to do anything that might affect the integrity of the pool, right? So, be patient and take your time.

What Kind Of Material Should The Drill Bit Be Made Of?

You’ll want to use an aluminum drill bit with a rounded point. Otherwise, you’ll be causing unnecessary damage to the sides of your pool. Besides, cheap copper bits with sharp points aren’t made to be used in wet environments. So, rather than risk ruining your pool, go with the aluminum. Just make sure that it’s been treated with grease or oil to prevent it from clogging up while you’re drilling. The point is to have a smooth and even flow while adding water to your pool. Otherwise, you might end up having a big clog later on. This can be extremely frustrating. So, with that in mind, go for the aluminum drill bit.

How Many Drills Should I Use?

This is another important factor to consider. You want to use as few drills as possible to avoid overuse. One drill will typically do the trick. However, if you’re really pushing your luck, you might want to use a second drill just to be on the safe side. This way, you won’t need to stop and switch gears when the first bit gets stuck. Plus, you can prevent the second bit from becoming dull too quickly by switching it out for a new one occasionally. So, rather than risking causing an accident by using multiple drills, simply go with one. Just be careful not to damage your pool in any way while using it.

Once you’ve finished drilling all your holes, cover them with either gravel or dirt. This won’t keep out all the water completely, but it will keep out most of the large debris, like leaves and twigs. The latter are perfect for blocking up the holes later on. When adding this material, make sure that it’s been filtered to ensure that its liquid content is at its minimum. Otherwise, you’ll be introducing additional bacteria and other hazardous substances into your water system. The last thing you want is for your kids and pets to get sick from swimming in filthy water.

Is It Okay To Add More Than One Type Of Debris To My Pool?

Yes, it is. In fact, you might even want to add a couple of different types of debris to your pool to provide more contrast in color. For example, you could add some large sticks for the summertime and some small branches for the wintertime. The important thing is that all the material you add should be deodorized before being placed in your pool. Otherwise, you might end up with a disgusting smell. Also, make sure that the material has been cleaned adequately prior to being added to your pool. This is a common cause of infections in the area. After all, a little bit of dirt never hurt anyone.

How Do I Prevent My Pool From Getting Dirty?

To prevent your pool from getting dirty, you’ll want to filter it regularly. This means changing out the filter every three months or so. For the sake of this article, we’re going to assume that you know how to change the filter yourself. If you’re looking to hire someone to do it for you, then consider the price tag. Typically, a pool service is going to charge you at least $150 per hour, plus the cost of materials, to just change the filter. So, rather than paying them to do something that you might do easily yourself, consider doing it yourself or paying a little less for a regular service.

How Do I Clean My Pool Once It’s Been Finished?

There are a couple of different ways to go about cleaning your pool once it’s been finished. For the sake of this article, we’re going to assume that you’ve already removed all the debris and started the process of adding water. Once the hole is completely drilled, you can begin by scrubbing it down with a stiff brush and some cleaning chemicals. After that, you might want to add a few drops of chlorine to the water to ensure that it’s going to stay fresh and clean. Finally, when everything is said and done, you can seal the area around your pool with either clear plastic or screens. This is going to help keep out all the large debris and prevent it from being flushed away with water. So, by adding a few simple steps, you’ve guaranteed the safety of your children and pets while adding a touch of flair to your pool area.

Do NOT follow this link or you will be banned from the site!