How To Assemble Your Hayward Perflex Pool Filter Like A Pro

Welcome to our comprehensive guide on assembling your Hayward Perflex pool filter like a pro. Whether you’re a seasoned pool owner or a newbie, this guide will provide you with step-by-step instructions on how to put together your filter.

Our guide will be broken down into several sections to make it easy for you to follow along. We’ll start by discussing the basic components of your Hayward Perflex filter, then move on to a detailed, step-by-step guide on how to put it together. We’ll also cover how to clean and maintain your filter, troubleshooting tips, and how to maximize its efficiency.

By the end of this guide, you’ll have the knowledge and confidence to assemble your Hayward Perflex pool filter like a pro. So, let’s dive in!

Learn The Basic Components of Your Hayward Perflex Filter

If you want to make sure your pool stays clean and clear, a Hayward Perflex pool filter is a great choice. But before you can get started with assembling your filter, it’s important to understand the basic components that make up this high-quality pool filter.

One of the most important components of your Hayward Perflex filter is the filter tank. This is the main body of the filter, where water is cleaned and purified. Inside the filter tank, you’ll find a filter element, which is responsible for trapping dirt and debris that enters your pool water. And of course, no pool filter would be complete without a pump to circulate water through the filter and back into your pool.

Understanding these basic components is the first step in successfully assembling your Hayward Perflex pool filter. With this knowledge in hand, you’ll be well on your way to a crystal clear pool that’s always ready for swimming.

Perflex Filter Tank

Component	Description	Function
Filter Tank	The main body of the filter which houses the filtration elements and manifold.	Filters out impurities and debris from the pool water.
Manifold	A collection of tubes that distribute water evenly across the filtration elements.	Ensures that water passes through each filtration element to be cleaned thoroughly.
Filtration Elements	Perflex filters use Flex-Tubes which are made of a durable material that is resistant to tears and punctures.	Traps dirt, debris, and other contaminants from the pool water as it passes through.
Air Relief Valve	A small valve located on top of the filter tank that releases air trapped inside the filter.	Prevents the build-up of air pressure inside the filter which can damage the filtration elements.

The Perflex Filter Tank is the heart of the filter system. It houses the filtration elements, manifold, and air relief valve. When the pump is turned on, water from the pool is drawn into the filter tank where it passes through the filtration elements, trapping dirt and debris. The clean water is then returned back to the pool. To ensure the longevity of your filter system, it’s important to clean the filter tank regularly and replace any worn-out parts.

Filter Cartridges and Bump Shaft Assembly

Filter cartridges are an essential component of your Hayward Perflex pool filter. They help trap debris and keep your pool clean. The cartridges are made of durable, porous material that is designed to capture even the tiniest particles. The bump shaft assembly is responsible for cleaning the filter cartridges.

It’s important to check the condition of your filter cartridges regularly, and clean or replace them as needed. A dirty or damaged filter cartridge can reduce the efficiency of your pool filter and lead to cloudy or dirty water. With proper care, filter cartridges can last for several years before needing to be replaced.

The bump shaft assembly is responsible for cleaning the filter cartridges. It’s important to make sure that the bump shaft is aligned correctly and functioning properly. If the bump shaft is not working correctly, the filter cartridges may not be cleaned thoroughly and your pool water may not be as clean as it could be.

Multiport Valve and Pressure Gauge

The multiport valve is a crucial component of your Hayward Perflex filter. It is responsible for directing the flow of water through the filter and backwash cycles. The valve has several settings, including filter, backwash, rinse, waste, and recirculate. Understanding how to use each setting properly will ensure that your pool stays clean and clear.

The pressure gauge is another essential part of your Hayward Perflex filter. It measures the pressure inside the filter tank and indicates when it’s time to backwash. When the pressure gauge reads 8-10 psi above the starting pressure, it’s time to backwash your filter. Failure to do so can result in poor filtration and decreased water circulation.

It’s important to regularly inspect the multiport valve and pressure gauge to ensure they are functioning correctly. If you notice any cracks or leaks, it’s best to replace the parts immediately to prevent further damage to your filter system.

Step-by-Step Guide to Putting Together Your Hayward Perflex Pool Filter

Now that you know the basic components of your Hayward Perflex pool filter, it’s time to put them together. Follow these simple steps to assemble your filter like a pro.

Step 1: Attach the filter tank to the base
Start by placing the filter tank on the base, aligning the notches and the pins. Then tighten the nuts securely.

Step 2: Install the filter cartridges and bump shaft assembly
Insert the filter cartridges into the tank, then insert the bump shaft assembly into the filter cartridges. Make sure they are secured properly before proceeding to the next step.

Step 3: Connect the Multiport valve and pressure gauge
Attach the Multiport valve and pressure gauge to the filter tank, making sure that they are properly aligned and tightened. Use Teflon tape to ensure a tight seal.

With these simple steps, you can assemble your Hayward Perflex pool filter with ease. If you encounter any problems or have questions, consult the user manual or contact a professional pool technician.

Before starting the assembly process, ensure that you have all the necessary components and tools, including the Perflex filter tank, filter cartridges, bump shaft assembly, multiport valve, and pressure gauge. Once you have everything you need, it’s time to start assembling your Hayward Perflex pool filter.

The first step is to install the Perflex filter tank on a level surface. Ensure that the surface is stable and can support the weight of the tank when it’s filled with water. If the surface is not level, you may encounter operational issues with your filter, and it may not function efficiently. Use a spirit level to check the surface’s levelness and make any necessary adjustments.

Next, you will need to connect the filter cartridges and bump shaft assembly. Start by inserting the bump shaft assembly into the center of the filter tank. Then, carefully insert the filter cartridges around the bump shaft assembly, ensuring they fit snugly into place. Make sure that the bump shaft assembly is centered, and the cartridges are evenly spaced to prevent any operational issues.

Insert the Filter Cartridges and Bump Shaft Assembly

Start by inserting the bump shaft assembly into the center hole at the bottom of the filter tank.

Next, insert the filter cartridges into the bump shaft assembly. Make sure they are properly aligned and seated in place.

Once the cartridges are in place, replace the air relief tube on top of the filter tank and tighten the clamp band to secure the cartridges and bump shaft assembly in place.

It’s important to note that the order of the filter cartridges matters. The filter cartridges should be placed in the tank in the same order they were removed, or according to the manufacturer’s instructions.

After inserting the cartridges and bump shaft assembly, check to make sure the air relief tube is properly positioned and secured. This will help prevent any air leaks in the system.

With the filter cartridges and bump shaft assembly securely in place, you’re ready to move on to the next step in assembling your Hayward Perflex pool filter.

Attach the Multiport Valve and Pressure Gauge

Step 1: Apply a small amount of lubricant to the O-ring on the bottom of the multiport valve to ensure a tight seal.

Step 2: Place the valve onto the top of the filter tank and align it with the bolt holes. Insert the bolts and tighten them with a wrench.

Step 3: Attach the pressure gauge to the top of the valve by screwing it in clockwise. Be sure not to overtighten.

Step 4: Attach the backwash hose to the waste port on the valve if you plan on backwashing your filter.

Step 5: Finally, attach any other necessary hoses or attachments to the appropriate ports on the valve.

By following these steps, you can easily attach the multiport valve and pressure gauge to your Hayward Perflex pool filter.

How To Clean and Maintain Your Hayward Perflex Pool Filter

Regular maintenance of your Hayward Perflex pool filter is crucial for keeping your pool water clean and clear. Here are five steps to ensure your filter is properly cleaned and maintained:

Backwash the filter regularly to remove debris and dirt that has accumulated in the filter media. This will help keep the filter working at peak efficiency.

Clean the filter cartridges by removing them from the tank and hosing them down with a high-pressure nozzle. Be sure to inspect them for any signs of damage or wear and replace if necessary.

Check the O-rings and gaskets regularly for any signs of wear, cracks or damage. Replace them as necessary to prevent leaks and ensure the filter is working properly.

Lubricate the O-rings and gaskets with a silicone-based lubricant to help them last longer and prevent leaks. This should be done regularly, especially before reassembling the filter after cleaning.

Monitor the pressure gauge on the filter regularly to ensure it is within the recommended range. If the pressure is too high, it may indicate a clogged filter and it’s time to clean it again.

By following these simple maintenance steps, you can keep your Hayward Perflex pool filter working at its best and ensure your pool water is clean and clear all season long.

Backwashing Your Perflex Filter

Backwashing is the process of cleaning the filter media by reversing the flow of water through the filter. It’s important to backwash your Perflex filter regularly to ensure it operates at peak efficiency.

To backwash your Perflex filter, start by turning off the pump and closing the skimmer valve. Then, set the multiport valve to the “backwash” position and turn the pump back on.

Allow the pump to run for several minutes or until the water in the sight glass runs clear. Then, turn off the pump and set the multiport valve to the “rinse” position. Turn the pump back on and let it run for a minute or two to flush out any remaining debris.

Cleaning the Filter Cartridges

Over time, your Perflex pool filter cartridges will accumulate debris and dirt, which can reduce their effectiveness. Cleaning the cartridges is essential to maintain optimal pool filtration. Here are some steps to follow:

1. Turn off the pump: Before cleaning the cartridges, turn off the pool pump and release the pressure from the system.
2. Remove the cartridges: Loosen the locking ring on the top of the Perflex filter and remove the cartridges.
3. Hose down the cartridges: Rinse off the cartridges with a garden hose, making sure to remove any debris or dirt from the pleats.
4. Soak the cartridges: Prepare a cleaning solution of 10% muriatic acid and water in a large plastic bucket. Submerge the cartridges in the solution for 1-2 hours, making sure they are fully covered.
5. Rinse the cartridges: After soaking, rinse the cartridges thoroughly with water to remove any remaining acid and debris.

After cleaning, reassemble the Perflex filter and turn the pump back on. It’s recommended to clean the filter cartridges every 4-6 weeks, depending on the pool usage and water conditions. By following these simple steps, you can ensure that your Perflex pool filter is always functioning at its best.

Replacing the Filter Cartridges

Regularly replacing the filter cartridges of your water filtration system is important to maintain clean and healthy water. The frequency of filter replacement will depend on various factors such as the type of filter used, the water quality, and the amount of water that goes through the system. In general, it is recommended to replace the filter cartridges every 6 months to a year.

The first step to replacing the filter cartridges is to turn off the water supply to the filtration system. This will prevent any water from leaking out during the replacement process. Next, locate the filter housing, which is typically a cylinder-shaped container that holds the filter cartridges. Depending on the type of system you have, you may need to use a wrench or other tools to open the housing.

Once you have access to the filter cartridges, remove them from the housing and dispose of them properly. Take note of the order of the cartridges as you remove them, as this will be important when installing the new ones. Using a clean cloth, wipe down the housing and make sure there are no dirt or debris inside.

• Step 1: Check the manufacturer’s instructions for the specific type of filter cartridges that are compatible with your system.
• Step 2: Insert the new filter cartridges into the housing, following the same order as the old ones. Make sure they are properly seated and secured in place.
• Step 3: Close the filter housing and tighten it securely with a wrench or other tool if necessary.
• Step 4: Turn on the water supply and run the water for a few minutes to flush out any air bubbles and activate the new filters. Check for any leaks around the filter housing and tighten it further if needed.
• Step 5: Reset the filter replacement indicator on your system, if it has one, to remind you when the next replacement is due.

Finally, make sure to note the date of the filter replacement and set a reminder for the next one. Keeping track of the filter replacement schedule will ensure that your water filtration system continues to provide clean and safe water for you and your family.

Filter Type	Frequency of Replacement	Cost
Carbon Filter	6 months to 1 year	$10 to $50 per cartridge
Reverse Osmosis Filter	1 to 2 years	$20 to $100 per cartridge
UV Filter	1 year	$50 to $150 per cartridge
Ceramic Filter	6 months to 1 year	$20 to $50 per cartridge

Remember to always follow the manufacturer’s instructions when replacing the filter cartridges. If you are unsure about the process, contact a professional for assistance.

Troubleshooting Tips for Your Hayward Perflex Pool Filter

If you own a Hayward Perflex pool filter, you know how important it is to keep it in good condition. However, even the most well-maintained filters can experience issues from time to time. Here are some troubleshooting tips to help you keep your pool filter running smoothly:

Problem: The filter is not cleaning the pool effectively.
Solution: Check the pressure gauge to see if it’s reading higher than normal. This could indicate that the filter needs to be backwashed or the filter cartridge needs to be cleaned. Another possible cause could be that the pool pump is not running at the correct speed or there is an obstruction in the pool’s suction line. Make sure to address any of these issues before proceeding with pool use.

Problem: The filter is making strange noises.
Solution: If you hear unusual sounds coming from your pool filter, it could be a sign that the impeller is damaged or there is debris in the pump basket. Turn off the pump and inspect the impeller and basket to remove any debris. If the issue persists, you may need to replace the impeller or have a professional take a closer look.

Problem: The filter is leaking.
Solution: A leaking pool filter can be a frustrating problem to deal with. First, check to see if any of the O-rings or gaskets need to be replaced. If the issue persists, you may need to tighten the tank bolts or have a professional inspect the filter head to determine if it needs to be repaired or replaced.

Low Filter Pressure

If you’re experiencing low filter pressure with your Hayward Perflex pool filter, don’t worry, it’s a common issue that can be resolved with a few simple steps. First, check the pressure gauge to ensure that the pressure reading is accurate. If it’s not, you may need to replace the gauge.

If the pressure gauge is reading accurately and the pressure is still low, the next step is to check for blockages in the filter. A clogged or dirty filter can cause low pressure. Take apart the filter and clean it thoroughly. Make sure to clean the filter cartridges properly, as they can often become clogged with debris and dirt.

If cleaning the filter cartridges didn’t solve the issue, there may be a problem with the pool pump. Check to make sure the pump is running at full capacity and there aren’t any blockages in the intake or return lines. If you notice any cracks or leaks in the pump, you may need to replace it.

• Check the pressure gauge to ensure accuracy
• Clean the filter cartridges properly to remove blockages
• Inspect the pool pump for any issues or damage
• Ensure the pump is running at full capacity
• Check for blockages in the intake or return lines

If you’ve tried all of these steps and the low pressure issue persists, it’s best to call a professional to diagnose the problem. They can help identify any underlying issues and make the necessary repairs to get your Hayward Perflex pool filter running efficiently once again.

Leaks in the Filter Tank

If you notice water leaking from your Hayward Perflex pool filter, it’s important to address the issue as soon as possible to prevent any further damage. Here are three possible reasons for leaks in the filter tank:

Cracks in the Tank: Over time, the filter tank can develop cracks due to wear and tear, age, or extreme weather conditions. If the tank has cracks, it will need to be replaced. Look for any visible cracks or wet spots around the tank.

Loose Fittings: Sometimes, leaks can occur due to loose or damaged fittings in the filter tank. Check to see if any fittings, such as O-rings or unions, need to be tightened or replaced. Tightening the fittings may help fix the leak.

Faulty Pressure Gauge: In some cases, leaks may not actually be coming from the filter tank itself but rather from a faulty pressure gauge. If the gauge is damaged or not working properly, it can cause water to leak out. Consider replacing the pressure gauge to see if that resolves the issue.

Remember, it’s important to address any leaks in your filter tank as soon as possible to prevent further damage to your pool system. If you’re not comfortable troubleshooting the issue yourself, it’s always best to consult a professional for help.

Maximizing the Efficiency of Your Hayward Perflex Pool Filter

If you own a pool, you know how important it is to keep it clean and clear. A Hayward Perflex pool filter is an excellent choice for keeping your pool water sparkling, but there are a few things you can do to make it even more efficient.

Backwash and Clean the Filter Regularly

One of the easiest ways to maximize the efficiency of your Hayward Perflex pool filter is to backwash and clean it regularly. Over time, dirt and debris can accumulate in the filter, causing it to work harder than necessary. By backwashing the filter and cleaning it according to the manufacturer’s instructions, you can keep it running smoothly and effectively remove particles from your pool water.

Use the Right Size Pump

Another way to maximize the efficiency of your pool filter is to use the right size pump. If your pump is too small, your filter will have to work harder to keep your pool water clean. Conversely, if your pump is too big, it can put unnecessary strain on the filter and reduce its lifespan. Make sure to choose a pump that is the right size for your pool and filter system.

Keep Chemical Levels Balanced

Finally, keeping your pool chemical levels balanced can also help to maximize the efficiency of your Hayward Perflex pool filter. If the chemical levels are off, it can cause the filter to work harder than necessary, and it may not be able to remove all of the particles from the water. Use a high-quality water testing kit to monitor the chemical levels regularly, and adjust them as needed to keep your pool water clean and clear.

Using the Bump Handle Regularly

If you want to maximize the efficiency of your Hayward Perflex pool filter, you should make sure to use the bump handle regularly. The bump handle is a key component of the filter that helps to remove debris and contaminants from the filter cartridge.

To use the bump handle, first, turn off the pool pump. Next, move the handle to the “backwash” position and then return it to the “filter” position. This will cause water to flow in the reverse direction and remove any debris that has accumulated on the filter.

Experts recommend using the bump handle once a week during the swimming season to ensure that your pool stays clean and clear. If you notice that the pressure gauge on your filter is reading high, this is a good indication that it’s time to use the bump handle to clean the filter cartridge.

Choosing the Right Size Filter Cartridges

One of the most important factors in maximizing the efficiency of your Hayward Perflex pool filter is choosing the right size filter cartridges. It’s crucial to select cartridges that are compatible with your filter’s size and flow rate, as using the wrong size cartridges can result in poor filtration and damage to your equipment.

When choosing the right size filter cartridges for your Hayward Perflex pool filter, make sure to consult your filter’s owner’s manual or contact the manufacturer for guidance. You can also measure the dimensions of your filter’s cartridge housing to ensure a proper fit.

Keep in mind that using the correct size filter cartridges not only improves the performance of your filter, but also extends the lifespan of your equipment, saves you money on energy costs, and ensures a clean and healthy pool for you and your family to enjoy.

Frequently Asked Questions