How To Clear Cloudy Pool Water After Rain? [Expert Review!]

Spread the love

After a good, hard rain, you will find that your pool has become a bit cloudy. While this might not seem like a problem, you should know that there are several reasons why this is not a good thing. First of all, having cloudy pool water can mean that there is something in the water that you are not expecting. It can also be an indication that there is something wrong with the pool itself, as in the case of an open pool where the water is exposed to the atmosphere. If this happens during the day, the water could become contaminated because of exposure to sunlight. Finally, it is always better to have crystal-clear pool water, as this means that there are no unpleasant organisms (like algae or bacteria) in the water. If you want to keep your pool clean, you should take the time to learn how to clear it after every rainstorm.

How Does Rain Make the Water Cloudy?

As we stated above, rain can make your pool water cloudy, but the reason behind this is somewhat different than you might think. When it rains, the ground underneath the surface of the water becomes wet, which allows for some particles (mainly small solids such as silt and clay) to become suspended in the water. This type of water is called “polluted” or “cloddy” water because it is full of what are called “suspended solids”, which are mostly not beneficial for the pool owner. In other words, the ground beneath your pool has become a kind of “filth trap”, and this is why it is important to clean it after every rainstorm.

What Is the Proper Way to Clean My Pool After the Rain?

Now that you know what causes your pool to become cloudy after a rainstorm, you will want to know how to deal with this problem. In order to keep your pool clean, you must learn the correct way to do it, which is to remove the suspended solids (i.e., the dirt, silt, and clay) from your water. To achieve this, you must use the proper equipment and follow the correct procedures. Below, we will discuss these items in more detail.

Equipment Needed To Clean My Pool

The first thing you will need to do to keep your pool clean is to invest in some proper equipment. Before doing this, however, it is important to note that not all pools require this type of equipment, as some pools are naturally crystal-clear due to their environment (such as a mountain pool) or due to the type of filth that collects in them (such as a beach-type pool). In other words, if your pool is already crystal clear, you do not necessarily need to purchase this equipment.

In general, there are three types of equipment that you will need to clean your pool: sand filter, skimmer, and carbon filter.

Sand Filter

The sand filter is an important type of equipment because it allows you to remove some of the small suspended particles from the water. These particles become smaller and smaller the more often you clean it, which means they will eventually become so small that they will fall to the bottom of the pool and be removed by the filter mesh. As a general rule, you must purchase a sand filter that is large enough to handle the water volume of your pool (i.e., at least 10 sq.ft. for every 100 sq.ft. of finished pool space).

However, some people prefer to use smaller sand filters because they think there is something magical about having a large one (mainly due to the fact that they do not have the space for a large one). While there is nothing wrong with having a large and sturdy sand filter, you must keep in mind that some of the smaller ones are just as effective (if not more so) than the larger ones. This is mainly due to the fact that the larger ones are built with more durable materials that will last longer before you need to replace them.

Skimmer

The skimmer is another important piece of pool equipment that allows you to remove the smaller suspended particles from the water. When you use this type of device, you will find that the pool surface becomes much clearer, which in turn makes it much easier to see what is going on beneath the surface. You can usually find this type of equipment at your local pool store for around $100 to $150. This type of skimmer will also be useful when cleaning open pools or lakes because it allows you to easily remove small organisms (such as algae or baby fish) from the water. Be careful not to buy a cheap version of this item because they often malfunction or break down after just a few months of use. If you want to keep track of how much money you are spending on pool maintenance and upkeep, it is best to purchase a quality brand because they will last longer before needing to be replaced.

Carbon Filter

Another important piece of equipment that you will need to keep your pool clean is the carbon filter. This type of device is similar to a regular one in that it allows you to remove smaller suspended particles from the water, but it also adds a protective coating over the surface to improve the appearance of your pool. As a general rule, you must purchase a carbon filter that is large enough to handle the water volume of your pool (i.e., at least 10 sq.ft. for every 100 sq.ft. of finished pool space).

However, some people prefer to use smaller carbon filters because they think there is something magical about having a large one (mainly due to the fact that they do not have the space for a large one). While there is nothing wrong with having a large and sturdy carbon filter, you must keep in mind that some of the smaller ones are just as effective (if not more so) than the larger ones. This is mainly due to the fact that the larger ones are built with more durable materials that will last longer before you need to replace them. Once again, if you want to keep track of how much money you are spending on pool maintenance and upkeep, it is best to purchase a quality brand because they will last longer before needing to be replaced.

Procedures For Cleansing My Pool

Once you have all of the above equipment, it is time for you to start following the correct procedures for cleaning your pool. Before doing this, it is important to have correct knowledge regarding how these items work together to produce clean, beautiful water. Here are the steps:

Step 1: Place The Sand Filter At The Bottom Of The Pool, As Near As Possible To The Water’s Surface

The first step is to place the sand filter at the bottom of the pool, as close to the water’s surface as possible. After placing it, it should be leveled so that the top of it is even with the surface of the water. In this way, you will ensure that the entire length of the pool is covered and none of the water escapes through the top. If you have a rectangular pool, you should put the filter at one of the shorter ends because this will ensure that the majority of the pool is covered (if not all of it) by the sand filter. Once this is done, you should add some dry brush to the top to ensure that the entire surface area is evenly covered. This is very important because you want to ensure that no pockets of water remain undrunk during a heavy downpour. If you add the brush at the top, it will help prevent this and keep the water clean all the way through. Some people also like to use a submersible pump with a large suction cup because this helps them move the sand around more effectively when cleaning the pool. This type of pump is usually rented from the pool store because it is more practical for home use. Finally, it is also important to note that some types of sand filters come with an optional gravel setting, which is attached to the underside of the filter using metal rods. When this type of setting is attached, it allows you to use it like a traditional one because the small stones will help increase the water’s capacity. This in turn makes it easier for the pump to suck up the water and remove any unwanted particles in it.

Do NOT follow this link or you will be banned from the site!