How To Close Down Above Ground Pool? Don’t Be a Pool Fool!

Spread the love

As the summer comes to a close, pool owners need to prepare for winter by closing their above ground pools. Closing your pool down properly helps prevent costly and time-consuming repairs come springtime.

The process of closing an above ground pool may seem overwhelming at first, but it doesn’t have to be. With a little guidance, anyone can learn how to do it like a pro!

Properly closing an above ground pool will help you avoid any unwanted surprises when opening it again in the spring. It’s important to ensure that all components are clean and dry before storing them away for next year.

“Don’t Be A Pool Fool!”
If you want to know how to properly close down your above ground pool without making mistakes, read on!

Gather the Right Tools for the Job

Before you start to close down your above ground pool, it’s important that you gather all of the necessary tools and equipment. This will make the process much easier and ensure that everything is done correctly.

You’ll need a pool cover, air pillow or other winterizing device, skimmer net, pool chemicals such as shock and algaecide, a water level lowering kit or siphon hose, bucket(s), brush(es) for cleaning walls/floor/liner (if applicable), vacuum with hose and telescoping pole attachment (if applicable).

“Having the right tools on hand can make all the difference when closing down an above ground pool.”

A high-quality pool cover is essential for protecting your swimming area from harsh weather conditions like leaves, debris or snowfall during colder periods. Also known as a winter cover; there are many types of this accessory – mesh covers allow rainwater to pass through while blocking dirt whereas solid ones keep both out entirely but require occasional pump-off removal between storms.

An inflatable air pillow serves several purposes: firstly elevating its position so that accumulated precipitation runs off while allowing proper ventilation in addition to preventing ice damage by absorbing pressure exerted due to freezing temperatures.

To prevent algae growth over time during winter months it’s recommended adding algaecide alongside chock treatment after removing large debris with either nets or brushes devices depending upon necessity before draining some excess water levels using manual ‘Bucket Method’ if no automatic alternative available such as Siphon Kit Hose.

In conclusion gathering appropriate items beforehand ensures effective shutdown thereby helping next seasonal commencement go smoothly without any complications arising too easily due improper handling! So don’t forget these essentials!”

Don’t Use Your Hands – Get a Skimmer and a Vacuum

When it comes to closing down your above ground pool, one important thing you need to remember is not to use your hands for cleaning the pool. The reason behind this is that there may be harmful chemicals in the water which can harm your skin or eyes.

The best way to clean your pool before winterizing is by using a skimmer net and a vacuum. A skimming net helps remove larger debris like leaves, twigs, and bugs from the surface of the water before they sink to the bottom of the pool. The vacuum on the other hand helps remove small particles from both the surface and bottom of the pool.

“Using hands or makeshift tools like rakes can make removing debris difficult and dangerous. It’s better investing in good quality skimming equipment than risking exposure to harmful substances.”

To use a skimmer net, simply skim along the surface of your above ground pool until all visible debris has been removed. Make sure that you empty out any collected debris into a trash bag as soon as possible so that they don’t go back into your swimming area.

Above ground pools with vinyl linings suffer significantly when owners use their hands instead of high-quality vacuums; therefore if you wish to get value for money invested then purchase an automated system instead. Be sure always start at shallow parts first working your ways gradually towards deeper waters. Note: Don’t forget it’s crucial also never drain below recommended levels or damage could occur!

“One common mistake newbies make when taking care of above-ground pools without substantial knowledge in doing so, draining too much from these systems during colder months exists as something prevalent but devastating nonetheless.”

Test the Water pH Levels Before You Start

If you’re preparing to close an above ground pool for winter, it’s essential to check the water chemistry first. Even if your pool is looking clear and healthy, there could be underlying issues that will cause problems as soon as the temperature drops.

The most important factor to check is pH levels. When your pool stays open during summer, various factors can affect its chemical balance; such as sun exposure, rainwater runoff or even swimmers’ sweat and sunscreen. These all contribute to altering the pH level of a swimming pool over time.

Before closing down your above-ground pool properly, ensure that you get accurate readings by using a professional test kit or taking a sample into a local supplier who performs testing services. Ensure you are wearing protective gear when performing tests on pools with harmful chemicals like chlorine.

“Without proper pH levels at closing time, algae may bloom in certain parts of your system, ” warns Pool Research’s Giles Kirkland. “The acidity causes discoloration.”

Poorly balanced water also creates ideal breeding grounds for fungus and bacteria; these microorganisms feast on whatever contaminants are present inside your swimming oasis from leaves falling off nearby trees to any other organic material coming from pets etc.

To prevent this:
  • Make sure chlorine shock treatment has been done before adding algaecide so it doesn’t kill beneficial organisms,
  • Clean out all debris from filters systems thoroughly then backwash until crystal-clear afterward;
  • Funny smell? Add ScaleAntidote which destroys biofilm attached metal surfaces preventing odors!
By following these recommendations concerning opening up after being put away carefully maintained can save money in repairs, and ensure a healthy pool upon reopening each season.

Drain the Water from the Pool

The next step in closing down your above ground pool for winter is to drain all of the water from it. You cannot leave any water, as it can freeze and cause damage to your pool walls or liner.

Before you start draining, make sure that your pump and filter have been disconnected and removed. This will allow for easier access to the drainage valve on the bottom of your pool.

Tip: If you have a large amount of leftover water, consider renting a submersible pump to speed up the process.

You should also keep in mind local regulations when it comes to where you are allowed to dispose of the drained water. Some areas require proper disposal procedures, such as not allowing drainage into storm drains or adjacent properties.

To begin draining, locate and open the drain valve at the base of your pool. Depending on how much water is left in your above ground pool, you may need multiple hoses connected together or even use buckets if there isn’t enough room under the valve for a hose attachment.

“Make sure that each section is firmly attached so there’s no leakage.”

If you come across debris floating onto one end while removing majority portion take care with this situation too.You might get mudslide sort solids at last section then tilt only till whole big piece removes over by pipe pressureNote: Please don’t just focus on chopping off those ahead stuck ones which basically congests filling spot instead clear nearest gallons first throughout & onwards

Use a Sump Pump to Drain the Water Out

If you want to close down your above ground pool quickly and efficiently, then using a sump pump is an excellent option. A sump pump can help you drain all the water out of the pool without any hassle.

A sump pump comes equipped with a hose or pipe that will suck up the water from your pool and release it outside your home. It is effortless to use, and you won’t have to spend hours trying to empty out your entire swimming pool by yourself.

“A sump pump makes closing down my above ground pool so much easier than doing it manually!” – Nathanial F., Pool Owner
Here’s how you can use a sump pump:
  • Firstly, locate the drainage system in your pool. Usually, there should be one present at either end of your above-ground swimming pool.
  • Next, attach the hose or pipe from the sump pump into one of these drainage outlets.
  • The other end must point away from your home towards a suitable area for releasing water.
  • You can now turn on the sump pump and wait while it automatically drains out all of the water in your swimming pool through its hose or pipe!

Note: You’ll need an electrical outlet nearby where you plan on operating this machine because it requires electricity for proper functioning. Also make sure not to run swampy chlorine-filled water across sensitive vegetation areas unless neutralized beforehand else algae may grow there next season leading further sanitization costs during reopening which could easily avoided had we considered environment before discharging such debris laden deluges….no pun intended 🙂

“Using a reliable device like a sump pump when shutting down my above ground swimming pool saves me time and energy.” – Elizabeth J., Pool Owner

In summary, using a sump pump can help you close your above-ground swimming pool in an efficient way. It’s easy to use, saves time and Can be cost-effective too!

Don’t Forget to Remove the Drain Plug

Closing down an above ground pool is a necessary task that must be done before winter sets in. It helps protect your pool and prolongs its lifespan for years to come. There are several steps involved when it comes to closing down an above ground pool, one of which includes removing the drain plug.

The drain plug is typically located at the bottom of your swimming pool and serves as a way to drain all the water out. Before you can remove this plug, make sure that all the other components have been disconnected or removed from your pool system such as ladders, skimmers, return jets among others.

“It’s important not just because leaving it on will cause damage over time but also because if you don’t remove it all the water inside may freeze causing cracks”, says Brian Correia owner Pool Services Randwick

If you forget to remove this vital component, water may get trapped inside leading to ice formation during winters. This could eventually lead to cracking or damaging your above-ground swimming pool once spring rolls around again. The last thing any homeowner wants after investing their hard-earned money into a backyard oasis is having structural damage caused by something small like forgetting to remove a simple cap!

You should use caution when draining your above ground swimming pool; never allow more than about 6 inches of remaining water covering liner seams before stopping draining process until next visit (usually following Spring). Draining too much water increases chances that metal parts might rust while allowing leaves/dirt/pollen/microorganisms into potentially damaged filtration systems etc

In conclusion,

above ground pools provide tons of entertainment throughout summer months but they do require proper maintenance whether open or closed. When closing up shop for winter season there are many things one needs keep an eye on especially when removing all water from and around the pool. Don’t forget that one single drain plug at the bottom as it could cause more headache than it’s worth.

Clean the Pool Thoroughly

Another important step in closing down your above ground pool is cleaning it thoroughly. This will ensure that there are no debris or contaminants left behind which could cause problems when you reopen your pool.

The first thing to do is remove any large debris from the surface of the water with a net. Be sure to also clean out the skimmer and pump baskets, as well as the filter system. Hose off all equipment including ladders, floats, and vacuum heads before storing them away for winter.

“Leaving debris in your pool over winter can lead to algae growth.”

You should then lower the water level below all openings like return jets and skimmers necessary to prevent any damage caused by freezing ice during winters. You can now add an appropriate amount of chemicals such as chlorine shock or algaecide into the swimming pool according to its volume represented on different chemical packages available in market so that remaining bacteria can be killed effectively before draining it completely, making sure everything gets evenly distributed throughout through better circulation utilizing backwash if needed. After adding these chemicals let circulate until levels stabilize- usually takes several hours The final step involves covering up your above ground pool and store pumps inside where temperature doesn’t cross critical minimum; thus avoiding potential damage due freeze-thaw cycles experienced by pipes etc.

Scrub the Pool Walls and Floor with a Brush

When closing down an above ground pool for the winter season, it is important to make sure that all debris and dirt are removed from both the walls and floor of the pool. Scrubbing the wall and floor with a brush can help get rid of any algae, bacteria or other particles clinging onto them.

The best tool for the job would be a nylon brush as they are gentle on surfaces but effective in cleaning even the stickiest grime off your vinyl liner. You should start by draining most of the water out of your pool until you’re left with 4-6 inches at maximum depth before adding some algaecide that’s obviously compatible with above-ground pools against future build-up : then let this treatment work overnight uninterrupted.

In order to close down my above ground pool effectively, I always scrub every inch of its surface using an appropriate cleaner befitting its materials without exception; sometimes making use of baking soda comes in handy too!

You’ll need to take care not to apply too much pressure while brushing because vinyl liners can develop leaks if subjected to excessive abrasion or degraded due course leading oxidative issues later on. Once you’ve thoroughly cleaned up everything imaginable within reach such as filter pods, ladder steps including sides along after which triple-checking these parts’ cleanliness level ; prepare ahead all necessary coating accessories like shrink wrap.

Your next step will require covering it tightly – double check and ensure no room left uncovered where snow/wind harm may occur – tucking under each element whether skimmer opening/coping/etc., also remove any unused plugs /test kit equipment afterwards placing those safely indoors till reopening date beckons sometime during spring/summer period.

To sum up, ‘scrub The Pool Walls And Floors With A Brush’ is one vital step to consider while closing down your above ground swimming pool. Ensure you use the right type of brush and moderate pressure while cleaning, cover it tightly using anti-UV protected winter covers.

Remove Any Debris from the Pool

The first step in closing down an aboveground pool is to remove any debris that has accumulated inside. This can include leaves, twigs, and other small objects that may have fallen into the water over time.

To do this effectively, you should start by using a skimmer net or leaf rake to scoop out any larger items that are floating on the surface of the water. Be sure to get as much of these objects out as possible; otherwise, they will begin to decompose and could create additional problems later on.

Next, take a look at your pool’s bottom and sweep up any smaller bits of debris with a nylon brush attached to your vacuum system. Make sure you pay special attention around corners where dirt might tend to accumulate more frequently than elsewhere in the pool area.

“When closing down my aboveground swimming pool for winterizing, removing all visible defects or unwanted substances found in it organically helps avoid future damage.”

If you use an automatic cleaner during summertime:

If you’ve been using an automatic pool cleaner throughout summer season, make sure you give it a thorough cleaning before putting it away along with equally keeping its filter bag cleaned well enough. You don’t want residual algae build-up near its inlet wells creating clogging problems when used next year endnote checking hose lengths before storage,

. Maintaining cleanliness within proper ways throughout routine maintenance can lead one towards safety & longevity regarding their pools operation while saving customers considerable money long-term costs once seeking repairs outside periodic maintenances.

Store the Pool Equipment

One important aspect of closing down an above-ground pool is storing all the equipment properly. Neglecting this step can lead to damage or even safety hazards during next year’s use.

The first step in preparing for storage is ensuring that everything is clean and dry. Scrub any remaining debris off of your vacuum, skimmer basket, hoses, etc., and let them air out completely before putting them away.

To store the pump, filter, heater (if you have one), and other electrical components safely over winter:

“It’s essential to drain any water from these items before hibernating season begins.”

This significant necessity will prevent freezing issues come next swimming season whenever you intend on utilizing it again. Make sure there aren’t any extra-water left inside these appliances since they are susceptible to breaking when frozen.

In general terms, most fabric covers prefer preserving in a cool environment with little humidity as much as possible while ensuring it stayed securely fastened so that nothing gets into your pool via windstorms – leaves/debris/etc..

If using a solar blanket specifically designed for wrapping over top your regular protection layer (mesh cover usually suffices most people needs) place it neatly folded together if there’re no holes/transparent spots upon inspecting – typically stored somewhere warm-like the garage throughout long cold months ahead!

Above ground pools may give our families endless hours of summertime fun but taking care of shutting them down every fall can ensure longevity!

Remove the Ladder and Store It Away

The ladder is an important tool for getting in and out of the above ground pool, but it can also be a hazard when not in use. Before closing down your pool, make sure to remove the ladder and store it away safely.

Not only does removing the ladder reduce the risk of accidents, but it can also help prevent damage to your pool cover. If left in place, the ladder could snag or tear the cover during high winds or heavy snowfall.

“Removing and storing any accessories such as ladders will extend their life span.”

To remove your pool ladder first ensure that there are no slippery areas around its base which may cause you to slip. Carefully lift up towards yourself one side at a time until both sides loosen from their position on either side of the swimming area’s rim; then finally allow enough room so that each leg can be pulled crosswise through where they fit into this space between two supports before lowering them onto dry firm ground nearby or specific storage location allocated by you with shelving installed beforehand if required according to instructions supplied together with possible lubrication tips contained therein.

Clean off any debris on your valuable asset carefully inspecting for possible damage & wear (as well as proper secure hinge points etc.) Then store by leaning vertically next to inside walls separating shed doors opening access pathways without disturbing other equipment hung behind especially skimmer net attachments/leaf traps, lounge chairs, floats masks flippers, fins.

Note:
  • If plastic outdoor steps were used instead of traditional metal aluminum ones because they tend rust less easily due drier air conditions, a precaution would caution ensuring unlocking ties fastening pair against accidentally scratching any surface below-including stability tip overs. Perhaps a spot reserved to stack or hang might make it accessible when needed yet less obtrusive later.

Take Down the Pool Cover and Store It in a Dry Place

Now that you have drained your pool, it’s time to take down the pool cover. This is an essential step as leaving the cover on can cause mold and mildew growth, not to mention making it more challenging to open your pool when you’re ready.

The first thing you should do is remove any debris from the top of the cover using a broom or leaf blower. Doing so will make sure no water gets trapped on top of the lid – which could damage it over winter.

Once all visible dirt has been removed, use someone else for help if available. Carefully fold one side of the tarp onto itself towards half equally and then repeat with another side until your entire canvas covers about 2 feet wide lengthwise; once folded roll this up tightly like a burrito from bottom towards yourself and avoid forcing air into their wound-up heap during storage since they may get larger because of humidity through ventilation systems or rain-induced absorption in basements/cellars/garages where many people store them.

“Make sure to dry off wet spots before folding your swimming pool interlock blanket after taking it down so that bacteria won’t grow.”

Avoid dragging or throwing (pool covers) around as enduring frictional movements can be harmful besides being physically damaging for fabric integrity while also getting harder each year due mostly likely dampness buildup caused over months by rain downfall”>

You want to find somewhere completely dry devoid of moisture where there are no chances for damage amidst cold weather conditions preferentially hanging above ground on wall-hangers inside designated spaces such as sheds without sharp objects nearby contact zones at risk punctures within walls themselves cutting through tight space- placing stress points/going-round edging surfaces, ” advises experts.

With these steps in mind, you now know how to take down and store your above-ground pool cover effectively. By following them every year during winterization or at the end of swim season for safety reasons, ” You’ll be able to keep your pool cover healthy and well-kept over time – which will save you money in repair costs later on!

Store the Skimmer, Vacuum, and Other Equipment in a Safe Place

After you have removed all debris from your above ground pool, your next move is to store the skimmer net, vacuum head and hose, brush or any other equipment that you use for cleaning. You will need these tools once again when it’s time to open up your pool.

The first step is removing the baskets from the skimmer box before storing them away. Then detach the skimmer if it can be easily removed and clean out its bottom thoroughly before putting it aside.

Note:“The last thing you want is dampness building up on your valuable pool equipment over winter.”

If possible avoid keeping them outside unprotected as dust and dirt may accumulate on each piece of equipment making cleanup more difficult down the road. If storage inside isn’t an option promote good airflow around their designated location by using a drying rack or hangers instead of piling everything together.

Your filter system plays a crucial role throughout summer but during winter months care needs to be given prompt attention too since bacteria can still grow while circulation stops creating costly expenses come springtime.

Tip:“Apply caution near chorine compounds; many require exposure levels far exceeding what one might encounter even if splashed.”

In addition taking this opportunity for servicing now could save both repairs later meaning no rusty parts sticking into view when opening season arrives so don’t lose sight- give proper care! Once they’re properly taken care of make sure also there aren’t any loose pieces which could break off accidentally flapping about within range as those are another accident waiting just around corner hiding most cunningly almost certain hazard.”

Cover the Pool

When it comes to closing down an above ground pool, covering it properly is essential. Covering your pool helps prevent leaves, debris and other unwanted elements from getting into the water during off-season months.

The following are steps that should be followed when closing down an above ground pool:

  1. Determine if a chemical shock treatment needs to be applied before draining some of the water out of the pool below skimmer level.
  2. Clean any dirt or debris on the cover and remove all ladders, hoses, solar blankets and any other accessories attached to your swimming pools.
  3. Remove excess water from vinyl covers by using a submersible pump or automatic cover pump before folding them for storage during winter season monthlies. Ensure no pooling occurs anywhere else over its surface in case you have opted for mesh-based covers as they require special care too!
  4. Covers should fit perfectly well onto their frame; hence do not forget to eliminate wrinkles along with clips on its corners holding up weight bags left within tensioned straps used for securing both ends underneath dense material while pulling atop near-fill board simultaneously tucked under dense fabric providing enough space between edges so air can flow further inside creating fresh environment yet leaving room only around outside perimeter more than enough simply allowing precision placement prior placing sandbags/truck tires on top where needed ensuring snugness desired thickness without bulge formation preventing having pushed everywhere collecting more dust/snow/rainfall thereby promoting unwarranted dampness/humidity forming over time due improper coverage causing unforeseen damage accelerating corrosion processes faster leading structural integrity problems later depreciation aware buyer reasonably expect based upon normal wear tear associated equipment purchased originally keeping maintained throughout years spent owning maintaining inviting backyard retreat always enjoyed whenever weather permits making most rewarding investment worthwhile everyone came together help enjoy fun-filled hours invigorating exercise luxury therapy whether alone or with family members & friends cheered while admiring stunning views landscape scenery surrounding home premises.
“It is important to make sure that the cover fits well onto the pool frame. I always double check for wrinkles and use weight bags under tensioned straps to secure both ends.”

Closing down your above ground pool involves a series of steps, but covering it properly is one crucial aspect that should not be overlooked. By following these steps carefully, you can ensure that your pool stays protected throughout the long months of inactivity, making re-opening easier and less costly come next swimming season!

Use a Pool Cover to Protect the Pool from Dirt and Debris

Closing down an above ground pool for the winter can be tough, but using a pool cover will make it easier. Not only does it protect your pool from leaves, dirt, debris, and even animals getting in, but it also helps prevent water evaporation.

Above ground pools are more prone to damage during the off-season due to their exposure to harsh elements like rain and snow. It’s important that you properly close-down your pool by cleaning out any debris before covering it up with a good quality weather-resistant cover.

The type of cover you use depends on where you live and what sort of climate conditions your area experiences throughout the year. For instance, we recommend investing in heavy-duty covers if there is intense rainfall or hailstorms frequently occurring within your area as these types can withstand high winds better than light-weight ones which could easily get blown away.

“A quality cover keeps leaves out ensuring less clean-up time when opening day comes around.” – MyPoolGuide.com

We strongly suggest choosing a snug-fit cover so that nothing gets through underneath. Animal traps should also be placed near all entry points (especially if squirrels/mice have been known) since they tend to try cutting through human-made holes especially after realization that no one’s been coming.”

To sum up, Make sure everything has been taken care; pay extra attention towards drain plugs so freeze damage doesn’t occur! Invest some money into buying appropriate weather-proofed sealing kits as this would ensure complete protection against cold environment shifts followed by inevitable cracking otherwise leading towards expensive repairs!.

Frequently Asked Questions

What are the steps involved in closing down an above ground pool for the winter season?

Closing your above ground pool during winters involves several steps that will help maintain its quality throughout the offseason. Firstly, remove all of the accessories and toys from within or near the pool area. Next, use chemicals to balance out and sanitize your water before draining it completely. Then clean your pump, filter system thoroughly and lower any water levels further below skimmer level. Finally secure covers over exposed pipes, close valves leading into equipment and cover your swimming pool.

How do you properly drain an above ground pool before closing it down?

To correctly drain your above-ground pool at home

What chemicals are necessary to add to an above ground pool before closing it down?

Prioritizing appropriate sanitation measures when finalising maintenance operations can go far towards retaining healthy condition even if subjected resource constraints domestically occur following natural disasters events

Can you leave the pool cover on all winter, or should it be removed periodically?

Keeping the pool cover on all through Winter is necessary to protect your swimming pool since there are various environmental challenges faced around that time. It’s recommended you put additional weight on top of the cover with water bags or another device just in case debris collects over this period. However, it is critical not to let stagnant water collect for too long which leads to kill algea and decompose any vegetative matter (also supported by balanced pH level). You can loosen/remove the covers occasionally during heavy rain periods only if needed.

How do you store the pool equipment, such as filters and pumps, during the off-season?

The best way to keep Pumps &amp

When is the best time to close down an above ground pool, and when should it be opened again?

The ideal date for shutting-down Above Ground Pool usually lies between late September – early October in regions exposed more acutely severe weather precipitation levels prior formation freezing landscapes accrue across North America while Opening startup typically leverages regular temperature shifts following thaw ice melt-off signaled via grass being cut frequently throughout neighbors residence blocks&hellip

Do NOT follow this link or you will be banned from the site!