How To Convert My Above Ground Pool To Salt Water? [Fact Checked!]

Spread the love

If you are dreaming of converting your above ground pool into a saltwater pool then this article is for you. We will teach you everything you need to know about converting an “Above Ground” pool. It won’t be easy but with our expert guide, you will have everything you need to make it happen. Let’s get started.

The Basics

Before you start any project you must have the basics down. In this case, the basics are the dimensions of your pool. If you don’t know what size to get then you can usually find out by looking on line or at any DIY store. You also need to know how you want your pool to look. Do you want a traditional style with a cement finish or a modern look with a vinyl finish? There are many different looks you can achieve depending on what you want for your pool area. The design of your pool will determine the style of your deck so think about what you want before making any decisions.

The Tools You Need

Aside from having the basics down, you will need the right tools to do the job. In this case, you will need either a backhoe or a forklift to move all the dirt and concrete. You will also need a jackhammer, a crow bar, and some heavy duty wire to connect all the pipes. If you have any previous carpentry experience then this step will be a piece of cake for you. If not then it may be a little bit challenging but nothing that can’t be handled by a professional.

The Materials You Need

Speaking of challenges, you will need the proper materials to complete the project. In this case, you will need 3″ thick fiberglass insulation and two 10′ pieces of 2″ thick vinyl fence. You will also need 10′ pieces of 2″ thick wood or concrete block to support the fence. You will need to purchase a pool safety fence if you don’t have one already and you will need to get a permit from your city to dig the pool.

The Process

With all the material gathered, it’s time to start assembling the pool. The first step is to lay out all the pieces so you can estimate how much space you have and how much room you need to work. Measure and mark where all the pieces go before you start driving in the nails or screws. Driving in the nails can be very dangerous and cause serious injuries. Walls are most commonly injured by driving nails into them. If you are using screws then you want to make sure that you are using the right size for the hole you are drilling.

After you have all your materials laid out and your space calculated, start putting together the pool. Use your hands or a measuring tape to make sure all the pieces are the same size as each other. If you are using concrete then you will also need to start laying out the forms first and get the cement ready. Make sure to take your time so you get everything done right.

Once the pool is finished you can begin the process of filling it with water. Start by putting in a filter system to clean the water in your pool. Once the water is clear then you can begin adding chlorine for safety. Make sure to add the correct amount of chlorine for the size of your pool. You can add more once the chlorine is dissolved. Most pools should be cleaned and sanitized every week to keep them smell free and healthy.

If everything goes according to plan then you should have your saltwater pool in no time. However, it isn’t easy and it can take some time to figure out the right materials for the job. The key is to take your time and do everything correctly. You can also get professional help if you are feeling overwhelmed or if you are not sure what to do. With the right tools and materials, you will be able to complete the project easily and safely.

Do NOT follow this link or you will be banned from the site!