How To Drain Bestway Pool? Follow These Simple Steps!

Whether you’re taking down your above-ground pool for the season or simply need to drain it for a cleaning, knowing how to properly drain your Bestway pool is essential. If done incorrectly, you could damage the pool and its components.

Fear not! Draining a Bestway pool is actually quite easy when you know what steps to follow. In this article, we’ll guide you through every step of the process so that you can successfully drain your pool without any hiccups along the way.

We’ll cover everything from safety tips to equipment needed, and even give you some extra pointers to make sure the job gets done efficiently and effectively. Whether you’re new to pool maintenance or consider yourself a seasoned pro, these simple steps will help you get the job done with ease.

“By following our guidelines, you can begin draining your Bestway pool in no time and have it prepped for storage or sparkling clean in no time.”

So grab your tools, put on your gloves, and let’s get started on learning how to drain a Bestway pool like a pro!

Locate the Drain Valve

Draining your Bestway pool is an essential part of the maintenance process. It helps keep the pool clean and prevent damages caused by standing water during winter months or prolonged periods of inactivity. To successfully drain your Bestway pool, you need to locate the drain valve first.

The drain valve on a Bestway pool is usually located near the bottom of the pool structure. However, depending on the model and size of your pool, the location may vary. Here are some helpful tips to help you find the drain valve on your Bestway pool:

Check the User Manual for Location

If you’re unsure where the drain valve on your Bestway pool is located, the user manual can be a great resource. The manual will provide detailed information about all the components of your pool, including the drainage system and its location.

Look for the section titled “Drainage” or something similar. You may also find illustrations that pinpoint the exact location of the valve. If you don’t have a physical copy of the user manual, visit the Bestway website and download it from there.

Inspect the Pool Exterior

Although not always reliable, depending on how exposed the Bestway pool exterior is, you may see the drain valve physically without looking inside the instruction book.

A visual inspection of the outside frame of the pool might make it easy to spot the valve as it’s attached to one end of the pool with a hose connector. So look around your pool so you won’t lose valuable time doing it any other way later on because cleaning a well-maintained pool minimizes wear and tear over time.

Look for the Drain Label

If you cannot locate the valve after checking the user manual or inspecting the outside of your pool, you might want to look for a drain label. The drain label provides critical information about where the valve is located on the Bestway pool.

The label is often placed in a strategic position, and it’s easily seen from outside the pool area or along the interior surface, perhaps near the vinyl lining. All you need to do is read it carefully, follow its instruction and voila! You will locate the drainage valve stress-free.

Connect a Garden Hose to the Drain Valve

If you want to drain your Bestway pool quickly and easily, connecting a garden hose to the drain valve is the most effective method. However, there are some important steps that you need to follow in order to do this successfully.

Choose the Right Garden Hose

Before you start, it’s important to choose the right type of garden hose for the job. You should avoid using a heavy-duty hose or one that is too stiff, as these can be difficult to maneuver around the outside of the pool. Ideally, you’ll need a flexible hose with a diameter of at least 1 inch to ensure that water is drained effectively.

It’s also worth considering the length of the hose you use. If you have a large pool, you may need to invest in a longer hose so that you don’t have to move the drainage location mid-way through the process.

Attach the Hose to the Valve

The next step is to attach the garden hose to the drain valve on your Bestway pool. To do this, simply locate the valve (which will typically be positioned near the bottom of the pool) and unscrew the cap. You should then screw the adapter onto the end of the hose and insert it into the open valve – taking care to ensure that it’s tightly secured.

Once the hose is attached securely, you can begin to empty the pool by directing the flow of water away from your property. It’s worth noting that this may take several hours depending on the size of your pool, so make sure that you’re prepared for a longer drain time if necessary.

• Remember not to let the hose just drain onto the ground as that can damage any plants nearby due to fertilizer and chlorine in it.
• Once the drain valve is attached to the garden hose, guide the other end of the hose into a proper draining area for pool water. This can be an obvious place like your lawn or backyard where excess water won’t cause any problems or damage.

You may also find that debris accumulates at the bottom of the pool as the water starts to empty. To prevent this from clogging up the drainage process, you should use a skimmer net to remove any leaves, twigs, or other items that find their way into the pool.

“Pool maintenance is fairly straightforward – it mainly involves keeping the water clean and balanced. That may sound simple enough, but it can actually be quite complex.” -Matt Giovanisci

Finally, once the pool has drained completely, you should carefully remove the garden hose from the valve and replace the cap. It’s also worth flushing out the hose with fresh water to ensure that there are no blockages, which could cause problems next time you want to drain the pool.

The process to drain your Bestway pool might seem intimidating at first glance. However, connecting a garden hose to the drain valve can make the process swift and easy. Taking care of a few essential steps while draining can help prevent damage to nearby vegetation and speed up the overall process. Now that you know how to connect a garden hose to the drain valve, say goodbye to dirty water and get ready to enjoy sunny days by crystal-clear water!

Open the Drain Valve

Turn the Valve Handle

The first step in draining your Bestway pool is to locate the drain valve. Most Bestway pools come with a built-in drain valve located near the bottom of the pool. Once you have located the drain valve, turn the valve handle counterclockwise to open it.

Note: Some models may require you to remove the valve cap before turning the handle. Refer to your owner’s manual for specific instructions.

Let the Water Flow

After you have opened the valve, allow the water to flow out of the pool. Depending on the size of your pool and the amount of water inside, draining can take several hours or even days.

Tip: As water levels start to lower, use a pool brush to push any remaining water towards the drain to speed up the process.

Remove Debris from Drain Area

Throughout the draining process, debris will inevitably gather around the drain area. This can include leaves, twigs, and other small objects that can clog the drain or damage the pump if not removed.

Warning: Never attempt to remove the debris while the pump is running, as this can cause serious injury or damage to the pump itself.

To safely remove debris, turn off the pump and allow the water to settle. Then, using a skimmer net or vacuum head, carefully remove all debris from the drain area. Once complete, restart the pump and continue draining as normal.

• Quick Recap:
• Locate the drain valve near the bottom of the pool
• Turn the valve handle counterclockwise to open
• Allow water to flow out of the pool
• Use a pool brush to push remaining water towards the drain
• Turn off pump and remove debris from drain area
• Restart pump and continue draining as normal

“It’s important to properly maintain your pool throughout its lifetime. Properly draining your Bestway pool ensures clean and clear water for hours of summer fun” -Bestway Pools

Monitor the Water Level

One of the most important steps to draining your Bestway pool is monitoring the water level. If you don’t keep a close eye on it, you could end up damaging your pump or other equipment. Make sure to check it regularly and take action if needed.

Check the Water Level Regularly

To ensure you maintain the optimal water level in your pool, you should check it at least twice a week during peak swimming season. This will also help prevent major changes from happening to your pool’s chemicals and system components as well.

If the water level is too low, turn off the pump immediately as running it with low water can cause serious damage. Low water often has a louder sound than regular water levels once it hits the pump alerting you that the water level is lower than normal.

The best way to determine the appropriate water level is by using the skimmer box; run it for several hours and then check the waterline. Keep adding water until it reaches halfway on the skimmer opening.

Turn Off the Pump

Before starting any task related to a Bestway pool drainage procedure the first thing you must do is turn off all electrical sources such as the pool’s pump and heater to avoid accidents occurring. Pumps require water passing through them so when there’s no water left in your pool, they may burn out quickly without notice.

Once the filter panel closes, disconnect the circulation/filter hoses and ensure you mark their spots accordingly with tape or any other means before removing just as a reference spot while cleaning. To be prudent, wrap these hoses with plastic bags or cloths after draining to ensure foreign materials and debris are not clogged into them when stored away!

Close the Drain Valve

The next step is to locate the drain valve of your pool if it has one, usually located at the lower end or bottom, and close it to begin draining. Some Bestway pools come with a pool cover that aids drainage, remove this before proceeding.

You can either perform gravity drain by opening the drain’s valve, which involves using only the pull-out valves on most models to allow water to be drained out quickly, taking just a few minutes depending on how much water exists. Check manufacturer guidelines for specifics of gravity-draining information related to your particular model.

Alternatively, some Bestway pools have a special discharge hose designed for easy servicing and maintenance. Remove the plug from the hose port and connect your garden hose with the correct adapter, then turn on the spigot and let the vacuum process begin!

“Keeping track of your swimming pool’s water level is very important.” -Swim University

By following these simple steps you are well on your way to properly draining your Bestway pool in an efficient and safe manner!

Store the Pool and Hose

Drain the Remaining Water in Hose

To drain Bestway pool, you first need to take care of the remaining water in the hose. Before storing the hose, it is important to empty all the water out of it. This can be done by lowering one end of the hose into a bucket or using gravity to naturally flow water out.

Disconnect Hose from Valve

Once the hose has been drained, it is time to disconnect it from the valve that connects to the pool. This will prevent any water from flowing back into the pool when detached. Be sure to unscrew the connection carefully to avoid breaking the valve or stripping the threads.

Clean and Dry the Pool

Before storing your Bestway pool for the season or relocating it indoors, make sure it is cleaned properly so no mold or mildew can grow during storage. You also want it to stay looking new for as long as possible. Rinse the inside with fresh water so no residual chlorine remains. Use a mop or sponge to scrub off excess debris and algae on the walls, and use a squeegee to remove any standing water at the bottom of the pool. Allow ample time for the pool to dry before folding it up for storage.

Store the Hose in a Dry Place

Now that your Bestway pool has been emptied, it’s time to store the accessory pieces such as the hose. Make sure to keep the hose in a cool, dry place that is not exposed to direct sunlight which could cause it to become brittle over time. Wrapping the hose in bubble wrap or a cloth will help protect it further against dirt and potential damage during storage. Simply coil the hose around your arm tightly so it does not unravel during storage.

“Preparation is key to keeping your Bestway pool looking new for years to come.” -Industry Expert

By following these simple steps on how to drain Bestway pool, storing and caring for your pool will be quick and easy. With proper maintenance, you can ensure that your Bestway pool will provide lots of entertainment for you, your family, and friends summers to come!

Frequently Asked Questions