Did you know that a swimming pool can become waterlogged and cause you a lot of trouble?
It happens when there is an excessive amount of rain or hail that seeps into the swimming pool and makes it really wet. As the water molecules are smaller than air molecules, they are more likely to enter the pool and expand it.
If the water is not drained and removed from the swimming pool, it will eventually lead to water damage. This can happen when it overflows from the pool or when it forms puddles at the bottom of the pool. The former can cause mildew or bacteria growth in the pool, while the latter can cause the floor to get slippery and even lead to accidents. So, how can you ensure that this does not happen?
The solution is quite easy. All you need is a good pump and a few hours of your time each week. You will use the pump to drain all the water from the pool. Once the water is gone, you can leave the pool empty for a while. This will reduce the chance of any re-accumulation of water in the future. If you want to learn more, continue reading.
Table of Contents
Why Should You Drain Your Pool?
There are several good reasons why you should drain your pool. First, it prevents the excess buildup of water that can cause several problems. Second, it lets you know if there is any residual water left in the pool that could potentially cause flooding. Third, it helps preserve the environment. Fourth, it keeps the pool clean. And finally, it reduces the energy consumption when running the pump. So, these are all good reasons why you should drain your pool!
Now, let’s get to the task at hand. How do you drain your pool?
How Do You Drain Your Pool?
The first thing you should do is turn off all the faucets and valve in your pool before beginning the process. Since the water is no longer flowing into the pool, there is no longer any use for these items. Once you do this, connect the end of the pool pipe to a drain hole and run the water until it is completely drained. Do this until there is no more water in the pool. To ensure this, you can measure the level of the water in the pool with a meter or you can check the space between the skimmers with your fingers. When confirming that the water is completely gone, you can turn the valve back on and close the drain hole. Now, your pool is ready for the next session!
You can repeat this process once or twice a week to ensure that there will be no recurrence of waterlogging. Sometimes, especially in the summer, the water can quickly re-accumulate in the pool due to excessive rain or hail. So, doing this every two weeks or so would be ideal. A good rule of thumb is to drain your pool when it is 10 degrees outside and you have sensed that the water has started to collect in the pool. This will prevent any accidents due to the slippery pool floor. Also, remember to clean the pool after each draining session. This will help maintain healthy bacteria levels in the pool environment.
What About The Shower?
While you are draining your pool, it’s a good idea to use the shower as well. This will help cleanse you of the chlorine that is typically found in swimming pools. To avoid any nasty shocks or burns, make sure that the shower handle is completely closed and locked before you begin this process. Also, make sure that the shower head is not plugged in while you are cleaning it. This is an old wives’ tale that the shower head will become clogged if you don’t use it daily. This is not true at all! So, you can unclog your shower head with a little bit of baking powder and water. Once the water is drained from the pool, you can use the baking soda and water mixture to unclog the shower head. This way, you won’t have any problems in the future. Remember to clean the shower after each use.
The Final Step
Now, you have drained all the water from the pool. This is a very important step because this will prevent any future buildup of water. However, as the water is no longer protected from outside elements, it is now at risk of becoming contaminated. So, it is essential that you clean the pool from time to time and treat it with some chlorine-free water softener. Also, you should consider replacing some of the pool water with fresh water from time to time. This will ensure that the water remains healthy and suitable for the pool environment. If you do these things regularly, you won’t have any trouble with waterlogging issues. So, this is another good reason why you should drain your pool!
Remember to protect your pool area from extreme heat by blocking the sun with shade structures and fans. This will help reduce the temperature so that you don’t end up with an overheated pool. Overheating can cause several problems, so it is essential that you prevent this as much as possible. If you install an automatic pool cover, this will also prevent sunlight penetration and overheating. This is a crucial step in maintaining a healthy environment in your pool area.
Doing these things will help keep your pool water fresh and clean. This, in turn, will keep your pool area looking great all year long. So, there are several reasons why you should drain your pool. First, it prevents problems. Second, it lets you know if there is any water left in the pool. Third, it helps preserve the environment. Fourth, it keeps the pool clean. Finally, it reduces the energy consumption when running the pump. So, these are all good reasons why you should drain your pool!