If you’re reading this, I assume you either have pool water with lots of tiny bubbles in it or you’re about to get it. If not, then perhaps it’s time to consider upgrading your pool. It is not uncommon for pool owners to lose track of time in the summer, working on their pool as much as possible. As a result, when winter comes, there are often big problems with the water- such as lots of tiny bubbles that quickly turn into large ones, causing lots of damage. That’s why we’re discussing how to get rid of those bubbles in the first place- to ensure your pool stays pristine all year long. But, how?
Well, you could strain your pool water through cheesecloth or a couple of layers of kitchen towels. And while we’re on the subject of straining, you could also use a bit of fabric that’s been designed specifically for this purpose. Once you’ve strained your pool water, you can run it through a water softener (which most homeowners with pools will have). Water softeners prevent the formation of hard water crystals, leaving your pool with a softer water texture. And it also restores the normal PH balance of your pool water. So, while this might not sound like a magic wand to remove all the bubbles, it can help in keeping your pool crystal clear all year long. Even if you don’t use a water softener, you could still remove most of the bubbles with your hands. Just make sure to save the rest for now.
Table of Contents
Why Are There Spots On My Pool Deck?
We’ve all seen those horror movies where the swimming pool gets completely covered in slime. While that might be slightly over-dramatic, we can certainly understand why there might be some slime on your pool deck. After all, it’s natural. In the spring, as the temperatures start rising, small creatures such as earthworms and snails come up from the soil, looking for a place to live. Unfortunately, they often find their way into your pool. As a result, in the summer, you’re usually covered in slimy stuff. It’s pretty gross, but hopefully, not as bad as you might think. The good news is that you can eliminate the sliminess with a simple pool cleaning. Just follow these tips:
1. Change The Water When It Starts To Tasteless
The first and most critical step to keep your pool clear of slime is to change the water every three weeks or so. This is when the snails and earthworms come up for air, so it’s the perfect opportunity to clean out your pool. Changing the water also helps prevent algae growth, which can also be controlled with a simple water change. Remember, the darker the water, the more oxygen it has, which can help prevent algae growth. So when you start to see lots of algae on the surface of your pool, it’s time to swap the water. You can use a water change tray, which most pool owners will have in their pool. Just make sure to empty it at least once a week, otherwise, you’ll just be creating more work for yourself. When emptying the tray, be sure to leave at least a couple of inches of space at the top, otherwise, the chlorine will settle at the top and you’ll simply end up with cloudy, toxic water.
2. Clean Out Your Pool Equipment Regularly
Did you know that cleanliness is almost as important in swimming pools as the water quality? Just like your body needs to be cleansed sometimes, so does your pool. Regular pool cleanings will help remove all the gunk at the bottom of the pool. Just remember, the more you use, the more you need. We all love a good scrub down, but too many cleanings can do more harm than good. The best rule of thumb is once a month, in the spring and autumn months. In the summertime, it’s best to wait until your pool has cooled down a little bit before cleaning it. This will help prevent any risk of overheating- which could potentially cause damage to your equipment. It’s also important to spot clean any items that have been submerged in the pool, as it’s easy for them to become wet and start to rust. You can use a pool cleaner, specifically designed for this purpose, to make the process easier and ensure all surfaces are thoroughly cleaned.
3. Regularly Remove The Scum On The Surface
Did you know that the surface of your pool can also become slimy and infected with bacteria, if not cleaned regularly? If you leave it uncleaned for too long, it can even become toxic. Regularly cleaning the surface of your pool can help keep the water crystal clear and healthy. A good starter scrub, for just about any surface, is a half-and-half mixture of saltwater and regular soap. You can also find commercially-prepared liquid surfaces for pools, which are generally easier to use and more effective than having to mix your own chemicals. They come with a chemical that breaks down the oil and dirt on the surface, while also protecting the water beneath. As a result, your pool will stay looking brand-new for longer, avoiding that horrible โSlime-Factorโ that plagues many a backyard oasis.
4. Check For Leaks And Holes In Your Pool Deck
It’s always a smart move to be on the lookout for leaks and holes in your pool deck. Did you know that even small leaks can cause big problems? If there’s any sort of wetness on the surface of your pool deck, it could be a sign of a potentially bigger problem underneath. Small holes can be easily patched up with some sealant, but if they’re ignored, they can quickly become big problems. If there are any signs of water damage, then it might be a good idea to have it repaired by a professional. Small cracks and pinholes are easy to fix, but it’s better to be safe than sorry and ensure everything is done correctly the first time.
How To Get Bubbles Out Of Pool Water?
Now that you’re equipped with the basics of keeping your pool clean and clear-let’s discuss how to get rid of the bubbles. Did you know that it’s actually extremely easy to do? And just like that, your pool water will be transformed into a crystal-clear spring-the perfect oasis you’ve always wanted. All you have to do is follow these simple steps:
1. Use A Cleaning Material
One of the best things you can use to get rid of the bubbles in your pool water is a cleaning material. With a little bit of elbow grease, you can remove most of the bubbles just by scrubbing the pool with a clean cloth or sponge. When you use a cleaning material, it will adhere directly to the surface of the water, lifting all the gunk at the same time. Did you know that some pools even come with a built-in filter, which automatically catches all the bubbles as you swim? If your pool doesn’t have one of these, then you can purchase a separate one, which will help improve the overall quality of your pool water. Just make sure to empty the filter at least once a month, or whenever it gets full-this will help ensure all the bacteria at the bottom of the pool are removed along with the slime and gunk.
2. Run The Water Through A Water Softener
Did you know that the water in your pool can become extremely hard, even dangerously so, depending on several factors? Did you know that this might damage your pool and its surrounding areas, including your pool’s water quality? Did you also know that this might result in big repairs bills? If you have a water softener, then it’s time to consider using it. Did you know that your water becomes harder as it gets older? It starts out life fairly clean and clear, but over time, the dissolved minerals in the water become more concentrated, making the water more dense. This is what results in that โpond waterโ look that so many people hate. The good news is that a water softener can help keep this from happening. It works by drawing the hardness out of the water, resulting in a softer, more pleasant-tasting water. Although it might not seem like it at first, it’s actually quite beneficial. When used in combination with a proper filter, these elements can work together, preventing all sorts of damage from occurring. Just remember: using too much chlorine can also cause damage. So make sure you keep an eye on how much chlorine your pool is taking in, as it can become harmful to your pool’s health if used too frequently.