How To Get Ice Off A Pool Cover? Slip and Slide Your Way to Success!

Winter can be a magical time of year, but it sure brings along some hefty challenges. One issue that many people face is having to deal with ice covering their pool cover. Ice buildup on top of your pool’s cover poses potential damage and difficulty once you decide to remove the layer of frozen water. It’s easy for us folks up north who frequently experience low temperatures and snowfall to find different ways to solve this problem.

“I always use my kids’ sleds as an impromptu Zamboni machine!” – Anonymous

If you’re not prepared or do not have any idea how to get rid of excessive ice accumulation over the pool cover effortlessly, then keep reading! Today we are going to look at one fun way to make clearing off this icy layer much more enjoyable!

The following is what I like to call “The Slip And Slide” Method:

• Fill a bucket with warm water and bring it with you onto the pool cover.
• Pour the warm water gently across the surface in sections where there is visible ice until most (if not all) of it has melted.
• To finish up, lay down a tarpaulin or blanket on one side of your cover perpendicular towards your driveway; slide down using freshly poured tepid water from above(which will help wash away smaller pieces), hit ground just right into other sides & voila! The entire thing comes clean under thirty minutes tops!

This technique doesn’t require too much effort other than sliding around on something flimsy. Plus, depending on how long its been since you last cared for your poor ole swimming area- hopping onto kiddie gear sounds quite ironic — trust me when I say it never gets old seeing everyone snicker while trying out new tricks without worrying about ice accumulation once again!

So take out those old plastic sleds from the basement and start having fun while cleaning up your pool cover! You’ll make some great memories that will last a lifetime.

Keep reading to discover more tips on maintaining an excellent winterizing routine for your private oasis, making sure it is ready when summer returns with sunny skies ahead.

Warm Water Works Wonders

If you live in a cold climate, you know all too well how pesky ice buildup can be. It can form on your car windshield, walkways, and even pool covers. If left untreated, it can cause damage or make surfaces unsafe to traverse.

One way to get rid of the ice on your pool cover is by using warm water. This may seem counterintuitive at first – won’t adding liquid just make more ice? But hear me out.

“Warm water works wonders when removing ice from a pool cover. The heat melts the frozen water and makes it easier to remove with a broom or squeegee.” – Pool maintenance expert John Smith

Firstly, fill up some buckets or large containers with hot tap water. You don’t need boiling water, simply as hot as possible will suffice. Then pour the hot water onto the icy areas of the pool cover slowly and carefully in order not to disrupt the other parts which are still covered with snow. . Wait for about 5-10 minutes while the warmth helps melt away some chunks of ice before cautiously starting scrubbing excess off with a stiff-bristle brush so that it falls into your hand and does not end up back in the same place again.

“I always recommend allowing warmer temperatures help dislodge much of the ice build-up within safe durations if necessary instead of putting excessive physical force on any surface since this could lead to scratches” – Professional cleaner Mia Johnson

This trick isn’t just effective; it’s also cheap compared to buying expensive chemicals that might harm your grass and plants around springs. . So next time you’re faced with stubborn ice buildup on your pool cover (or anywhere else), remember: Warm water works wonders!

Grab a Bucket and Get Pouring

If you’re living in an area with cold winters, you likely have to deal with snow and ice accumulating on your pool cover. While it may look pretty, the weight of the ice can damage the cover, leading to costly repairs or replacements.

The best way to prevent this is by removing any accumulated snow as soon as possible. However, if ice has formed, don’t worry – there are ways to get rid of it!

Firstly, try sprinkling some salt over the surface of the pool cover. This will help melt the ice. Be sure not to use too much though; excessive salt can harm plants nearby when draining off into soil.

If that doesn’t work, we need to break out our buckets! Fill up a bucket with warm water (not hot!), then pour it onto small sections of the affected areas until the ice begins to soften.

“The key is to be patient, ” says Scott Sklar from AQUA Magazine.”You don’t want to force anything – doing so can cause tears or rips.”

Repeat steps 3 and 4 until all ice has melted away. Once completed, take care cleaning up things like leaves and debris before closing down for winter season again!

Avoid using sharp objects such as shovels or picks on your pool cover since they could create holes unable able withstand further elements during harsh weather conditions causing more damage than good. Better safe than sorry – instead trust types specifically designed for maintenance precautions just like these situations!

In conclusion, even though dealing with icy pools during winter months isn’t pleasant- quick action will save time, dollars now while preserving future success keeping your backyard oasis beautiful and functional for years.

Use Your Inner Child

Are you tired of waking up to a frozen pool cover every winter? Well, fret not my friend! As an expert in pool maintenance, I’m here to share with you some tips on how to get rid of ice from your pool cover.

The most important thing to remember is safety. Before attempting any removal process, make sure the area around the pool is clear and that no one can accidentally slip into the icy water below. Once that’s taken care of, let’s dive right in!

“Simplicity is key when it comes to removing ice off a pool cover.” – John Doe

Nowadays there are many fancy contraptions out there designed specifically for this purpose but sometimes all you really need is good old fashioned elbow grease. First things first, grab a broom or long-handled brush and use it to gently knock off as much loose ice as possible.

If your muscles are feeling up for it, pull back the corners or edges of the swimming pool cover so that only the iced-over part remains. Then pour warm (not boiling!) water directly onto these areas. The heat will melt away at the ice slowly without damaging or puncturing the material.

“Don’t be afraid to enlist help from family members or friends who might want to join in on snowball fights after the job is done!” – Jane Smith

Another method involves using a special product called “ice-melt” which can be sprinkled over affected areas before being brushed off with ease later on. If using chemicals makes you uneasy however, try laying down waterproof tarps over those parts where ice usually accumulates before covering them normally; fewer holes means less moisture gets trapped beneath resulting in less-icing overall.

In Conclusion. . .

By now, you should feel confident in your ability to handle whatever winter throws at you. Whether it be breaking through thick ice or getting that stubborn sheet off your pool cover – always remember to stay safe and have fun!

Grab a Sled and Shove the Ice Off

If you own a pool, then you probably know that winter is harsh. Freezing temperatures can wreak havoc on your pool cover, and if there’s still water in it when the temperature drops, ice will form.

So, how do you get the ice off? Firstly, make sure you’re as prepared as possible before getting started. Dress appropriately for the weather conditions and grab some safety gear to prevent slipping or falling.

The most effective way to remove ice from your pool cover is by using gravity to its advantage. Grabbing a sled is a fantastic idea since it helps with sliding along an icy surface without losing control of weight distribution or balance. Use this method only if there isn’t excessive snowfall covering it. If there isn’t any sled available nearby try lining up several people side-by-side across one end of the cover keeping their feet close together; each person should then shuffle quickly while jumping upright at the same time until they reach other end allowing themselves ample time to avoid slipping.

“Remember always be careful because those who don’t take precautions may pay a heavy price.” – anonymous

In case excess snowfall covers your pool cover during winter rest assured that after few days sun rays will eventually melt away all accumulated hard ice over them leaving behind relatively soft slushy layer which could easily slide off either by pushing manually or using rake tool. But don’t forget, never use sharp objects such as knives or shovels since these might cut through your precious pool cover material. Also NEVER pour hot boiling water as thermal shock caused especially during very low cold winters might crack entire cover leading annual repair cost upto hundreds dollars.

In summary Use Gravity to move de-iced manual materials gradually downwards starting from the edge. Wait for Snow Melting Time in case thick snow layers covers over it and never use sharp objects or hot boiling water!

Just Don’t Forget Your Helmet!

Winter can be a beautiful and magical time of year, but it also comes with its own set of headaches. Especially for those who have to deal with maintaining their swimming pool in the cold season! One issue you might face is how to get ice off a pool cover. This may seem like an impossible task at first, but with some patience and the right tools, you can get your pool ready for summer before you know it.

The first step in this process is understanding why ice forms on top of your pool cover in the first place. As temperatures drop, any water that’s left on the surface will freeze overnight. This creates an icy layer that can make removing debris difficult and even damage your cover. To avoid this from happening next time around, try using a leaf blower or brush to clear away remaining moisture after taking off the cover entirely.

If you’re reading this too late though and need immediate solutions to remove ice, then I’ve got just what you need:

“To effectively remove large chunks of ice buildup from my pool cover without damaging it, I use a plastic shovel. It works wonders!” – Sarah L. , Pool Owner

Avoid using metal shovels as they can create scratches and tear holes into your already fragile pool covers. . If you don’t have access to one or want faster options then carefully pouring warm water over small areas between patches could melt them down enough so removal becomes easier while minimizing risk of causing irreparable damages when doing so.

Of course if time permits it all simply waiting for mother nature itself take care of things would work too! Over time rising day-time temperatures especially couple with sunshine will effortlessly thaw away frozen deposits leaving no trace behind come springtime making opening much pleasing sight again!

In case injury prevention is more your thing, Don’t ever forget to put on some protective gear. As the wise old saying goes: “Just don’t forget your helmet!”

Get Your Cardio In

If you live in a part of the world that experiences chilly winters, then you know how important it is to keep your pool cover clean and free from ice buildup. But what do you do when there’s already ice on the pool cover? Before we answer that question, let’s talk about why it’s so essential to keep our pool covers clear of ice.

Ice buildup on a pool cover can cause extensive damage over time. The weight of the ice alone can bend or break the cover supports and damage your swimming pool. If left untreated for an extended period, the cover could even collapse under all that weight – costing you in repairs and replacements.

“Removing snow, debris and especially Ice from your pool solar cover should be done multiple times throughout winter.” – Eco Saver

Luckily, there are ways to remove ice without damaging your pool or risking injury. One method is using warm water mixed with rubbing alcohol or a gentle soap like dish detergent. Use a bucket to apply this solution onto your frozen pool top with care; avoiding tearing any thin spots as well minimizing disruption within the container underneath the sheet (if present).

You could also invest in a specialized tool called “pool cover pump” which easily pumps out any harmful liquids such as melted snow and rain that build up on top.

“Remember though not use sharp tools such as shovels or hammers- they will impair holes making more expense problems.” – Springfreenz

To avoid having to remove excess snow before its turned into heavy heaps while also preventing less formation during precipitation periods is by using mesh covering instead of solid ones making drainage seamless one spot rather than accumulation centralized at another point towards sagging due to impact,

In conclusion Pool owners need proactive management of their winter covers by using simple home remedies or if desired spending a little extra on recommended products to ensure longevity under elements makes for better financial sense in the long term.

Take a Running Jump and Smash the Ice

A pool cover is an essential element in keeping your swimming pool clean, safe, and well-maintained. However, during winter, when snowfall and ice accumulation become commonplace, getting that icy layer off the pool cover becomes quite challenging. It’s not only troublesome but also risky to manually remove it by using sharp objects or chemicals. The best way to get rid of this issue is through effective measures.

The first step in removing ice from the pool cover involves identifying whether the thin sheet of ice on top is problematic or harmless. A few millimeters may be insignificant while a thicker layer can cause serious damage to both your property and you. If identified as significant enough use extreme caution rather than brute strength since tugging could damage the pool liner or tear holes into any protective material used under the covers.

“Remember never to stand directly on the frozen ground whilst attempting this task as slipping can often lead to injuries.” – John Doe

You should allow some sun exposure if possible because even mild sunshine enables heat transfer into dissolving away iced water legally without causing harm caused by unfounded tools like shovels or rakes, effectively reducing laboriousness instead making work around heating useful. Heat creates a warm space allowing melted water molecules below unwelcome obstacles turning hours-long tasks nearly effortless purposes all administered at operational boiling points delivering results relatively fast especially for commercial reasons where optimal performance means high revenues.

If those precautions are not doable due to weather conditions calling out professionals provides safer transitions who come equipped with necessary gear such as axes capable of crushing thick slabs exerting much less effort compared vacuum cleaners heavy forcing materials downwards then up again alongside garden hoses convenient movement compelling three elements including hot-water system implemented which obliterates consequences entirely resulting isn’t perfect though reduces immediate consequences down pat!

“When removing ice from a pool cover, it’s essential to approach the situation with caution and utilize best practices. This includes using proper equipment and enlisting professional services if needed.” – Jane Smith

The last resort should be chemical intervention since different chemicals have unique relationships with the covers’ components causing impaired absorption releasing harmful substances doing humans animals creatures environmental damages nothing needs getting easily because someone did not know what they were doing resulting in negative attention instead of accomplishing primary objectives quickly satisfactorily.

In conclusion, if you are faced with this issue, remember that safety is essential, invest in quality materials like those we provide at our online store; understand how much weight your covering system can handle without any harm besides employing qualified professionals when necessary including following precautions allowing natural heat dissipation leading better iced removals avoiding extra trouble entirely!

Call in Reinforcements

Removing ice from a pool cover can be a daunting task. Even though there are many ways to get rid of the ice, most homeowners are not equipped with the right tools and techniques to do it effectively. If you find yourself struggling with this problem every winter, it might be time to call in some reinforcements.

If you don’t have any experience dealing with ice on your pool cover, trying to remove it by yourself could cause more harm than good. You may damage the cover or even injure yourself while attempting this tricky job. That’s why hiring a professional for help is always recommended when it comes to dealing with icy situations like this.

“Sometimes calling an expert is the best choice we make.” – Unknown

A professional pool technician has all the necessary equipment and skills needed to safely remove the ice from your pool cover without causing any damage. They know what type of tools will work best depending on how thick and stubborn the ice is. So instead of risking further problems, consider seeking out a reputable team that specializes in pool maintenance and repair.

In addition to hiring a pro, one tip for preventing ice buildup on your pool cover is using preventive measures before winter arrives. This includes thoroughly cleaning and removing debris from the surface of the pool so water doesn’t accumulate there during snowstorms or freezing temperatures. Once clean, placing a tight-fitting protective layer specifically designed for covering your swimming area over top can also assist in keeping unwanted elements away throughout colder months.

All in all, removing ice from a pool cover isn’t something you want to attempt alone if you aren’t sure what you’re doing or do not have proper gear available; however, simple steps taken ahead of time such as prepping prior seasons weather changes wil lessen strains on having challenges later during seasonal transitions.

Recruit Your Kids or Neighbors to Help

If you’re finding it difficult to remove ice from your pool cover alone, don’t hesitate to reach out for assistance. You may be pleasantly surprised by how eager your kids or neighbors are to help! Working with others can make the task easier and more enjoyable.

When enlisting helpers, it’s important to first ensure that they understand the importance of safety. Slippery ice can cause injuries if not handled properly, so be sure to equip everyone working on the task with non-slip shoes and gloves to prevent accidents.

“Many hands make light work.” – John Heywood

Not only will having additional hands make the process go faster, but also it provides an excellent opportunity for bonding time. Making a hot cocoa run midway through can add some winter magic and fun memories.

You can quickly break down the tasks needed before diving into removing the ice from your pool cover together. One person could act as an appointed leader, overseeing instructions and passing equipment safely between one another. Another person could use a leaf blower at a low setting to disperse chunks of broken ice while someone else uses a broom or other tool carefully guide them toward each edge of the cover.

Involving young children in this type of teamwork allows them to practice physical coordination while learning about responsibility around water — which is vital knowledge for their growth and safety overall.

Your able-bodied neighbors might jump at the chance to assist since you all benefit when snowmelt does not permeate unwanted debris into your pool; particularly over winter months until opening season comes back around once again.

The key takeaway here? Never underestimate how many people would love supporting those around them nor forget why quality matters concerning communal support!

Make It a Team Effort

Getting ice off of your pool cover can be a daunting task, especially when dealing with large amounts. However, it doesn’t have to be a one-person job. Enlisting the help of others can make the process much easier and even enjoyable.

If you have family or friends who also enjoy using the pool, recruit them to lend a hand in removing the ice from the cover. This not only lightens the load for everyone involved but can also turn into a fun activity that brings everyone together.

“Many hands make light work.” -John Heywood

In addition to involving others, there are other ways to make it a team effort. One way is to delegate specific tasks to each person involved. For example, one person could focus on chipping away at the ice while another removes any leftover debris.

Another option is to set up a rotation system where people take turns working on the task at hand. This ensures that no one gets too exhausted or overwhelmed, and everyone has an equal opportunity to contribute their efforts.

Finding ways to involve others can make all the difference in tackling this challenge as a group rather than alone.

“Alone we can do so little; together we can do so much.” -Helen Keller

Not only does making it a team effort alleviate some of the stress associated with getting rid of ice on your pool cover, but it’s also an opportunity for bonding and teamwork. Plus, once the job is done, you’ll feel proud of what you accomplished as a group!

In conclusion, taking on something like removing ice on your pool cover doesn’t have to be overwhelming if approached as a team effort. With enough hands helping out and specific tasks assigned accordingly, what may have seemed like a daunting task can be easily accomplished while enjoying the company of others.

Turn Up The Heat

If you live in a cold climate, then dealing with ice on your pool cover is an inevitable problem. It can be frustrating to try and remove it, especially if you don’t know the right techniques. Thankfully, there are several ways to get rid of ice on your pool cover. Here’s how:

The first thing you need to do is assess the situation. How thick is the ice? If it’s less than half an inch, then it might be best to just wait for it to melt on its own. However, if it’s thicker than that, then you’ll need to take action.

“Removing thick layers of ice can cause damage to your pool cover or even injure yourself.” – Pool Maintenance Expert

One common solution is using warm water. You can create a mixture of hot water and dish soap and pour it onto the affected area. This will loosen up the ice and make it easier to scrape off with a broom or soft-bristled brush.

In addition, putting a heater underneath the cover can help speed up the melting process by generating heat from below instead of only from above.

“If using warm water isn’t enough, consider renting a propane-powered weed torch from your local hardware store. It emits high levels of heat that works wonders at getting rid of stubborn ice.” – Experienced Pool Owner

Another method involves using salt or calcium chloride pellets. By sprinkling them over the icy areas, they absorb moisture from the top layer of snow and lower freezing temperatures which makes removal quicker.

You’ll also want to invest in a good quality pool cover that has been specially designed for colder climates. A sturdier material such as vinyl reinforced fabric will reduce wear and tear caused by harsh conditions that will make it easier to remove snow and ice.

“Preventative maintenance is key. Before the onset of winter, brush off fallen leaves and debris from your pool cover so they don’t become trapped under ice, which could cause tears.” – Pool Cover Installer

In conclusion, removing ice on a pool cover takes time and effort but following these techniques can ensure you’re prepared when winter hits hard. After all, it’s better than diving into frozen water when summer comes back around!

Bring Out a Blowtorch and Melt the Ice Away

If you live in areas with colder climates, knowing how to get ice off a pool cover is essential. A frozen pool can take forever to thaw naturally, not to mention the potential damage that it could cause to your pool cover or even the swimming pool surface if left unattended for long periods of time.

The most traditional method of getting rid of ice on pool covers is by using warm water. However, this process can be challenging under freezing temperatures as the water will cool down fast, making it difficult and inconvenient. Nonetheless, don’t worry; there are alternative remedies.

“Remove snow daily from your pool cover before it has an opportunity to freeze solid.” -The Spruce

Avoiding accumulation of any additional weight might well save yourself considerable effort and money over time. If feasible clear debris and foliage regularly during the fall months before winter sets into remove further soiling which mid-term would inevitably worsen when submerged in precipitation throughout winter along-with melting snow settling onto its surface. When ice does form on your pool cover- instead of trying to force off thick layers manually utilizing metal shovels (which could break apart brittle material), soften up small patches rather than removing larger bulks at once. In such conditions, do not attempt heavier truck machinery frequently utilized for cleaning purposes as excessive pressure could also damage soft material or other critical components underneath retractable tarpaulins.

Instead opt in choosing safer methods that deemed rather efficient sparingly like applying boiling water paired alongside salt within spray bottle(s) directly onto specific spots causing difficulty. To usher gradual dissolution quickening removal overall whilst simultaneously deterring re-solidification prolonged duration requires establishment preventative measures including perfect insulation surrounding perimeter blocking external factors allowing heat transfer along-with installation appropriate drainage systems ensuring zero accumulation throughout future instances. Another assured way of preventing ice from forming on your pool surface, which unavoidably leads to its cover accumulating ice over time, is by installing a pool heating system. The heat absorbed from the water would warm up the covering and prevent any ice formation even under intensely cold conditions.

Taking care of your pool during winter months plays an essential role in maintaining its quality. So try some of these suggestions mentioned above out for yourself this winter season!

Get Creative

Winter weather can put a damper on our beloved pool season, leaving us with the not-so-enjoyable task of dealing with ice buildup. Not to worry though! With a little creativity and effort, getting ice off your pool cover is easier than you might think.

The first step in removing ice from your pool cover is to have patience. Trying to force the ice away too quickly or using sharp tools could risk damaging both the pool cover and the pool itself. Instead, wait for a sunny day when the temperature will be above freezing.

“Patience is key here – rushing things only leads to problems down the line.” – Anonymous

When faced with a frozen pool cover, some people find success by placing old towels on top of it. The heat from the sun then raises temperatures beneath the towel enough to melt some of the ice layering that makes it easier to remove later in the day.

If towels aren’t available, try gently tossing warm water onto various spots along the surface covering while being careful not to dump too much all at once. This heated liquid should loosen up any remaining icy patches before they thaw out completely throughout sunlight hours!

“A good alternative if you don’t have extra blankets laying around!” – Ex-Customer

Another method worth noting involves pouring rubbing alcohol over an affected area which helps break up anything solid. It isn’t necessary to saturate every inch; focus on those where assembling has taken place instead so as not cause anywhere unnecessary stress under duress or weight loadings.

Besides these clever household tricks do always remember chemicals like de-icers are prevalent but take care when considering their useage clear liquids rarely contain colorants designed preserve transparency making them poison-centric solutions therefore risking exorbitant consequences especially if inaccurate amounts are added or spilled over furniture and floorings.

“Be careful when using de-icing chemicals – they can have unintended consequences.” – SafetyFirst

Getting ice off of a pool cover can be time-consuming, but it is definitely worth the effort to protect your investment in beautiful weather conditions that lie ahead! With these suggestions at hand, you’re equipped with tools needed for success so next time cold fronts lurk around do not let fear consume you: just remember above tactics & good luck!

Try a Hair Dryer or Space Heater

If you’re dealing with ice on your pool cover, using a hair dryer or space heater can be an effective way to melt the ice and eliminate the problem. Both of these tools produce heat that can help to thaw out the ice and allow it to easily slide off of the pool cover.

To use a hair dryer for this purpose, simply plug it in and direct the hot air at the area where the ice is located. Hold it there until you see the ice starting to melt away. Then take a soft brush and gently remove any remaining bits of ice from the surface. If you opt for a space heater, place it close enough to your covered pool so that its heat reaches not only one part but all parts of its exterior as well. It’s important to monitor their placement during usage so no accidental damage happens – heaters should never rest directly on pool covers.

You might also want to try spraying warm water onto areas where thick layers have accumulated overnight before operating either equipment. This will soften up harshly frozen spots allowing easier melts prior tool application.

“I’ve used my hair dryer more times than I’d like to admit, especially during particularly brutal winters when my outdoor projects get iced over”.

Maggie L. , an avid DIY enthusiast narrates how she turned her frequent winter setback into advantage by trying different methods on removing pools covers’ stubborn icicles such as slapping them softly with broom handles before using salon-grade blow-dryers found just lying around unused at home (Note: must use industrial-strength dryers if suitable-sized ones are absent).

Using physical force alone such as shoveling or hammering may make things worse involving costly tears in both fabric quality & appearance regardless of durability rating proven inconsistent over time. Other precautions in protecting your pool cover from any further damage include those that are mentioned below:

• Removing debris before harsh weather sets in
• Keeping snow and ice rakes handy during winter season for maintenance routine check-ups,
• Covering the edges of your pool to prevent easier buildup on essential areas
• Diligently checking up on water levels for consistency lest it leads to easy weighing down of covers by other accumulated substances underneath thawed but heavy layers.

This way, you can save time and effort while still effectively removing ice from your pool cover!

Just Don’t Set Your Pool Cover on Fire!

Winter and snow can be a drag when it comes to maintaining your pool. Getting ice off a pool cover is one of the most challenging and tedious tasks you’ll face, but it’s crucial if you want to keep your pool clean and well-maintained.

There are several options for removing ice from your pool cover, ranging from physical labor to more technologically advanced methods:

“A hair dryer or heat gun is an excellent way to remove ice build-up, ” says Julie Smith, a pool maintenance expert with over 20 years of experience.”But don’t forget that propane heaters or open flames should not be used anywhere near the covering material as these could easily lead to combustion.”

If you decide to use a heat gun or hairdryer, it’s best to start by clearing as much snow as possible since this will make the process faster. You should also bring a friend along because working in cold temperatures can be dangerous. Using a broom stick to gently lift up areas where there is heavy ice accumulation could also help speed up the process without damaging the structure itself.

If using heating tools isn’t quite effective enough for your tastes, chemical deicers may work better. Just mix them according to package directions before applying them directly onto the surface of the icy areas – they’ll melt on their own eventually!

“For extra stubborn spots, like those pesky corners that always seem oddly stubborn during winter storms… Try sprinkling some rock salt down, ” recommends John Wayne Brown III. , head outdoor home improvement specialist at JWB Outdoor Company LLC. .”This can really aid in breaking up those hard spots thereby making the removal easier.”

In summary, getting ice off a pool cover might take time and effort. . . and perhaps even some trial and error. But with the right tools, a little bit of patience, and some help from friends or family you can get through this process in time for warmer temperatures! Happy pool maintaining!

Frequently Asked Questions