How To Get Rust Out Of Your Pool Water? [Facts!]

Spread the love

Picture it, waking up in the morning to a bright sun shining through your partially opened curtains. There’s nothing more inviting than the feeling of waking up beside a placid pool, the gentle lapping of waves on the beach and the smell of frangipane and jasmine in the air. If this describes you, then you’re in luck because you’ve found the perfect way to spend your summer vacation. All you need is a pool and a pool cleaner.

Unfortunately, there’s more than one way for water to end up in your pool. Whether you’re a pool owner who enjoys frequent swims with his dog, or you just threw out your last pool cleaner and are now trying to do-it-yourself, there are ways in which water can find its way into your pool without you even knowing about it. Here are some of the most common ways in which water can seep in, and some tips on how to get rid of it once and for all.

Shower Door Failure

Let’s start with the most basic and probably the least problematic one. If you take a shower with your shower door open, and it rains or showers while you’re in there, then water will eventually find its way into your pool. This can be problematic because even if you have a very efficient and effective drain system, there will still be times when water finds its way into your pool regardless. The best preventative measure is to always keep your shower door closed when taking a shower, especially if you live somewhere humid or rainy. Even if you close your shower door, there will be times when the downpour is so dramatic that it will still overflow from your tub.

Leaky Faucets

Just like when taking a shower, having the water faucets leaking is also an invitation for water to find its way into your pool. This can be problematic because even if you have the best drain system in the world, there will still be times when the water finds its way into your pool. The solution is to install a stop-leak faucet which will help capture all of the water before it can find its way into your pool. These faucets are easy to install and can be found in most hardware stores or home improvement centers.

Septic Tank Failure

This can be similar to the previous problem in that the septic tank is also an invitation for water to find its way into your pool. The difference is that the septic tank is usually a permanent fixture and is not something you can change easily. If you have a septic tank and it continues to leak, then there is a chance that it could be permanently damaged. In this case, you will have to get it replaced or fixed, which can be very costly. Your best bet is to try and locate the source of the leak and fix it before it causes any serious damage.

Drain Backwater Pipe

If you live in an area where it snows, then you know that one of the major problems during the winter is the icemelt. When the temperature is at its coldest, it can be an invitation for water to find its way into your pool from the outside. One way in which this can happen is through the drain backwater pipe. If you’re not sure where this pipe is, then it’s best that you get familiar with the concept because in the wintertime, it’ll be the first thing that you’ll need to check for when you wake up in the morning. Simply follow the pipe from the outside wall of your pool to the inside, where it will eventually lead you to the drain. Once you locate it, just turn it to the “on” position and wait for the water to drain. Remember: if the water level in your pool gets too high, then it could cause damage to your pool and all of its surrounding structures. This is why you need to be careful about where you place your pool.

Improper Swimming Pool Drainage

One more way in which water can find its way into your pool is through improper swimming pool drainage. This can be a problem because when the water level in your pool gets too high, it creates a lot of pressure which can cause your pool wall to crack or buckle. In these cases, you will have to excavate the area around your pool to fix it properly. If you live in an area where it snows, then you know that one of the major problems during the winter is the icemelt. When the temperature is at its coldest, it can be an invitation for water to find its way into your pool from the outside. One way in which this can happen is through the drain backwater pipe. If you’re not sure where this pipe is, then it’s best that you get familiar with the concept because in the wintertime, it’ll be the first thing that you’ll need to check for when you wake up in the morning. Simply follow the pipe from the outside wall of your pool to the inside, where it will eventually lead you to the drain. Once you locate it, just turn it to the “on” position and wait for the water to drain. Remember: if the water level in your pool gets too high, then it could cause damage to your pool and all of its surrounding structures. This is why you need to be careful about where you place your pool.

Hopefully, you now understand the reason why it’s so important to keep your pool water clean. It’s not just because it smells good and is a great way to stay in shape, but there’s actually more to it than that. Having clean and fresh water in your pool will help keep your pool in good condition and stop it from deteriorating. It’ll also make the water more refreshing for you and your family when you’re by the pool during those hot summer days. So remember: stay safe and hydrated around the pool, and you’ll enjoy your summer vacation all the more!

Do NOT follow this link or you will be banned from the site!