How To Get Water Out Of Inground Pool? [Expert Review!]

Spread the love

A beautifully proportioned pool will undoubtedly cause delight to your eyes and spirit. However, if you live in an area where rainy seasons are common, you will need to consider how to get the water out of it before it causes any damage. In some situations, this may be as simple as opening up a nearby valve or draining the pool. But if the water is not readily accessible, you may have to look into other options.

The Best Way To Get Water Out Of An Inground Pool

As a general rule, ground pools should be drained once a month to prevent them from becoming a home for mosquitoes and other insects. While this may not pose a danger to your health, it is always an unwanted addition to your pool area. When draining your pool, it is important to note the location of the primary drain cock so that you can easily reopen it once the job is done.

In some cases, the drain cock may be located directly below the surface of the water. In others, it may be buried several inches below the mud and soil that you spread around the base of the pool. When reopening the drain, you must first locate it before you can achieve access to the main pipes that carry the water away. In yet other situations, the drain cock may be hidden inside a meter box attached to the side of the pool. When located, it is usually best to use a wrench to turn it. This is often the case when the drain is set inside a concrete wall, since it is hard to turn a lock with your hands while submerged in the water. Alternatively, you can use a stick or a small spade to push against the side of the pool to open the valve. This approach often works when the valve is set inside a metal grate or cover, as it allows you to slide the grate or cover to the side to gain access to the valve without being marred by the oncoming water.

Get In The Right Shape

Once you have opened up the drain, you must do your best to prevent further water from accumulating in your pool area. To achieve this, take the time to pump out the pool thoroughly before you start swimming in it again. For large or empty pools, this may mean walking around with a bucket to collect the water and drain it into a smaller container. Empty pools should be cleaned out and disinfected before they are refilled. To do this, either pour a bucket of bleach into the pool or pour a bucket of hydrogen peroxide into it and let it fizz for a few minutes before scrubbing it with a sponge.

Use Deodorizers

If you are experiencing an odor problem in your pool area, deodorizers are what you need to combat it. There are many different smells that can emanate from stagnant water, and these are often difficult to eliminate. Using a deodorizer in your pool will help mask these smells and improve the atmosphere in your pool area. Some deodorizers are more effective than others in this regard, so you may need to experiment to find out which one is best suited for your situation.

When choosing a deodorizer for your pool, make sure that it meets the following criteria: does it deodorize effectively, is it environmentally friendly, is it easy to implement, and is it of good quality. Some manufacturers offer products specifically designed for pools, and these products usually come with additional bonuses, such as anti-fouling benefits and UV protection. If you are looking for an environmentally friendly product, try for one that is approved by the Australian government as sustainable. There are also many different varieties of organic deodorizers available that are worth investigating.

Keep Up With Maintenance

Since maintaining a pool takes a lot of work, you may be tempted to simply leave it and its valves open all year long. However, this could lead to great harm, especially if you live in an area where flooding is a common occurrence. In these cases, it is important to keep up with the maintenance so that your pool does not experience any issues. For this, you must drain the pool at least once every three months and vacuum it thoroughly to remove any debris that has accumulated over time. It is usually a good idea to do this even if the water is clear and appears clean because there are usually some small particles that have settled at the bottom over time. In some situations, the vacuum action may suck these particles into the filter so that they can be removed as you draw fresh water into the pool. If this is the case, make sure to replace the spent filter with a new one.

Use Cover Options

If you are seeking additional protection from the sun and rain, you can always rely on the shade provided by a large tree or a building. However, there are other options as well that you can try. For example, you can construct a roof over your pool to create a covered area. If this space cannot be enclosed due to environmental constraints or practical issues, you can always install a translucent roof that allows some sunlight to filter through while shielding you from extreme heat and sun rays. As a last resort, you can place a small shelter over the pool to provide some privacy and security in your outdoor living space.

Keeping your pool clean is an extremely important aspect of maintaining its aesthetic appeal. For this, you need to drain the water at least once every three months and scrub it with a sponge and some chlorine tablets. If you are experiencing an odor problem, deodorizers are what you need to combat it. Finally, make sure to maintain the air pressure inside the pool so that any water that may accumulate does not cause any damage.

Do NOT follow this link or you will be banned from the site!