How To Let Water Out Of Summer Waves Pool? [Expert Guide!]

Spread the love

Wondering how to let water out of your summer waves pool? It’s actually quite simple, but it requires a bit of research and planning beforehand. So let’s get started.

Get Your Tools

Firstly, you will need to gather the necessary tools to complete the project. This includes a bucket, hose, and a few other items. You can get these items at most hardware stores or home centers (if you are installing it at home).

Choose The Right Location

One of the most critical factors in letting water out of your pool is choosing the right location. You want to ensure that the pipes are above ground, have ample room for movement, and are not obstructed by any rocks or debris. It’s also wise to choose a location that is not near any trees or bushes because they may cause a blockage due to their rough surface.

Dig A Bore

Now that you have your tools and the location chosen, it’s time to dig a small hole in the ground and insert the water pipe. Take your time with this step so that you are certain the hole is big enough to accommodate the pipe (a couple inches larger is good enough). Before you start digging, you might want to cover the area with some cardboard or plastic to prevent any splashing.

Set Up The Faucet

When you have the bucket near the hole, connect the faucet of your hose to the bucket (insert the faucet end first into the bucket). This will allow you to easily fill the bucket with water. Never overfill the bucket as this will cause unnecessary strain on your plumbing system.

Pour The Water

Once the bucket is full, carefully lower it into the hole (being careful not to slip and fall into the pool). As you let the water flow into the pipe, you can either stand back and admire your handy work or begin the process of filling up your pool. If you are installing it at home, let the water flow slowly (about a couple of feet per minute) until it reaches the desired level.

Tighten Up

Once the water gets to the desired level, tighten the nut at the base of the pipe. This will keep the water from escaping through the top due to gravity. After you tighten the nut, test the water level by giving the pipe a slight twist. If the water still comes out, then you have a slight leak and you will need to return to the task of fixing it. Some water may even be visible around the edge, in which case you should probably fix that too.

Turn The Water Off

Once you are certain that the water is contained and of the desired level, turn the water off at the faucet. Leave the tap open and unplugged so that the water continues to flow freely into the pool. Before you leave the area, test the water in at least three locations to make sure that all the pipes are indeed plugged and the water is contained as desired.

Finishing Touches

Depending on how deep your pool is, you may need to step it before you can swim in it. Be sure to clean up after yourself as all the dirt and splashes will stay on the surface. You can also add some beach towels to the pool area for a more comfortable feel. Finally, don’t forget about your summer waves pool! It’s truly a unique look that not many can offer and it’s something to be proud of.

Hopefully, you found this information helpful. Don’t hesitate to reach out if you have further questions. And remember, if you follow these steps accurately, letting water out of your summer waves pool should be a very straightforward process. Who knows, maybe your next door neighbor will even ask you to help them out with their pool too!

Do NOT follow this link or you will be banned from the site!