How To Lower Pool Akalinity Salt Water? [Expert Guide!]

Spread the love

Many home pool owners with saltwater pools have noticed that their pool gets “more salty” every year. A few drops of water can make a huge difference in the taste of your pool. Even if you add the proper amount of salt in the form of table salt, you will still notice an improvement in your pool’s water quality. The water becomes less sharp and more enjoyable to swim in.

The good news is there’s an easy way to fix this. All you need is a water filter system to remove the bad taste from your pool water. While many pool filters are designed to remove chlorine and chloramines, which are both byproducts of chlorinating pools, the majority of water filters installed in swimming pools are made of resin beads and contain some type of carbon. These filters are specifically designed to remove the “hard” minerals dissolved in the water. This includes magnesium (Mg), calcium (Ca), and potassium (K), which are the three main ingredients for making up human blood. These nutrients are essential for plant and animal life and are usually found in abundance in ground water sources. The bad news is it can take a while to see these benefits.

Before we begin, it is important to note that there is a difference between Akalinity and “hardness.” Your swimming pool‘s chemical make-up can be measured on the Akalinity scale, which ranges from 0-5. The higher the number, the “harder” the water. The scale is not standardized so the ranges can vary from 0-5, with 5 being the hardest. Typically, the higher the number, the more impurities and chemicals the water contains. When your pool’s Akalinity number is between 3.0-4.9 it is considered “medium hard,” and 5.0 or above is considered “very hard.”

Install A Water Filter System In Your Pool

Your pool’s water quality will improve dramatically after you install a good quality water filter system. There are many different types of water filters out there, so it’s important to do some research before buying one. Even then, it’s not necessarily a good idea to buy the first filter system you see, without trying out a few others.

In addition to filtering out impurities, chlorine, and chloramines, which is important for maintaining a healthy pool environment, most water filters can also remove unwanted chemicals at the same time. Depending on your pool’s size and shape, as well as how frequently you use it, you may want to choose a different pool filter for your setup. For example, a submersible pump with a reverse osmosis (RO) filter can be a great choice if your pool is smaller than 10,000 square feet and is only used occasionally. If you use your pool most days then you may want to consider a bigger pump with integral filtration. In either case, it is imperative to change the filter at least once every three months to ensure that it is cleaning your pool effectively. There are also numerous brands and styles of pool filters that are specifically designed for use with ground water, including potable water, so make sure to check out all the options before buying a particular brand. Finally, don’t forget to replace your pool filter cartridge when it is empty to prevent any type of malfunction.

How Do I Change My Pool Filter?

If you are changing the filter on your pool’s surface pump, you will need to remove the old cartridge and install the new one. Follow the guidelines below to ensure that the process goes smoothly and that you avoid any possible spills that could prove harmful to both you and the environment.

Before you begin, make sure that the pool is empty and that there is no one else swimming or diving in it. Then, turn off the power to the pool, unplug the pump, and remove the cap from the inlet valve. Next, drain all the water out of the pool. Finally, replace the cap on the inlet valve and turn the power back on. When the power is on again, the water should be flowing smoothly into the pool. It is also advisable to do this during the week or at least on a dry day. Avoid touching the water in any way while the pool is draining, as this can cause contamination. After the pool is drained, remove the inlet valve cover and clean it with soap and water to ensure that no debris gets clogged in the pipes. Finally, rinse the cover with water and replace it or hang it on a hook near the filter.

If you notice that the water is a bit cloudy after you re-install the new filter, that is perfectly normal. It can take up to an hour for the water to settle after you change the filter, so you may want to leave the power off and let the water settle for a while before re-energizing it. If you wait too long after changing the filter, however, you may end up with some serious damage due to overheating. That is why it is advisable to wait until the power has settled down before turning it back on. If you change the filter on your pool’s surface pump, it will be difficult to transport the water to the pool once the power is back on. That is why it is important to turn off the power, drain the pool, and replace the filter before leaving the house.

What Types Of Pool Filters Should I Try?

There are many different types of pool filters to choose from, so it is important to do some research before making a purchase. In addition to filtering out impurities and harmful chemicals, most water filters can also improve the aesthetic qualities of water by removing “taste”. Some filters are designed to remove the bad taste of iron, others are designed to remove rust and others still are made from ceramic material, which enhances the natural sparkling qualities of water. The type of filter you will use will depend on your pool’s size, shape, and how often you use it. For example, a sand filter will only improve the aesthetic qualities of water but won’t remove any impurities. If your pool is on a continuous basis, then you will want to look into buying a whole house water filter system that can be installed directly below the pool’s surface. It is also important to keep in mind that some filters are more effective than others at removing impurities, so make sure to try out a few different types before buying one.

As we’ve established, a majority of the pool filters in use today are designed to remove hard minerals from water. In most cases, this will be accomplished using some type of resin bead or ceramic material. In either case, these are two basic but effective types of filters that are widely available in home water filtration systems. The advantage of using resin beads is that they are relatively inexpensive and can effectively remove almost all of the impurities from the water. The problem with resin beads is that they can become clogged quickly, especially if your pool is on a continuous basis or if it is used every day or week. Once the resin becomes coated in debris, it will begin to inhibit the flow of water through it. That is why you should try to replace these filters as soon as possible whenever you notice that they are starting to deteriorate. The same goes for ceramic filters. These are also easy to maintain and clean, but they too can clog easily if debris is not removed regularly. Always remember that water clarity is increased when filters are changed regularly and clean water is always preferable to murky water.

Saltwater Pool Health Benefits

Having a saltwater pool in your backyard is both beautiful and refreshing. It is, however, important to remember that not all saltwater pools are created equal. There are several different health benefits that you can enjoy by maintaining a saltwater pool in your yard.

One of the major advantages of a saltwater pool is that it can be used for both bathing and drinking. Since most people are used to swimming in freshwater pools, the idea of swimming in saltwater may seem strange at first. However, the chemicals in freshwater pools can cause health problems for certain swimmers. For example, chlorine can irritate the skin and cause it to peel away. Another problem that can be caused by excessive chlorine is a blue-green algae bloom in the pool, which can lead to toxic algae blooms that threaten both wildlife and human health. These algae blooms can also produce large amounts of dissolved oxygen, which attracts fish and other water creatures that can eat the algae, causing still more problems.

There are also some disadvantages to having a saltwater pool in your yard. One of the biggest is the obvious fact that it draws more flies, bees, and wasps than a freshwater pool does. This is mainly because the saltwater attracts all types of wildlife. If you love being outside and being near water, then the convenience of having a saltwater pool in your yard is undeniable. Just make sure to install all the proper safety devices first and enjoy the water without any worries.

For more information on how to lower pool akalinity saltwater, visit the links below.

Do NOT follow this link or you will be banned from the site!