Summer is almost upon us, which means it’s time to open up your pool. But since it’s still relatively early spring, you might have to open up your pool a little bit early. This is something you want to avoid, especially if you live in a very hot place. However, even if you live in a cooler region, it might still be best to wait until the weather is better before you jump into your pool. This is because, quite frequently in the hot summer months, it can be extremely humid and damp inside the house. Especially if you live in a region where there are a lot of heavy showers, you don’t want to expose yourself to sickeningly high humidity while your body is still warming up.
So how do you open your pool up manually? You want to do this as soon as possible to give your pool time to drain and to remove any potential toxins that may have built up over the winter.
Fortunately, we’ve all got access to a toolbox these days, filled with all the necessary gadgets and gizmos to get the job done. If you’re fortunate enough to own a pool, but haven’t got a pool deck, you might already have all the necessary tools and equipment to get the job done. This article will guide you on how to manually open pool cover, step by step, so you can get out there and enjoy your pool without any hassles.
Table of Contents
The Need For Manual Opener
Even if you’ve got everything you need to manually open your pool, the occasional extra hand can still come in handy. This is especially so if you’ve got an uncooperative, stubborn pool cover. These types of covers are designed to be opened by hand and are relatively easy to open with the proper tools and techniques. But sometimes they don’t cooperate, and you’ll have to resort to more strenuous methods to open them up. This is why it’s a good idea to have a manual opener near your pool.
While there are several automated pool openers on the market, if you’re the type of person who enjoys doing things yourself, you might want to consider getting a manual opener. These types of pool openers allow you to open your pool up at the push of a button. But if you’re the type of person who likes to get their hands dirty, you might prefer a manual alternative. Not only will this allow you to get the job done yourself, but it will add a personal touch to the experience as well.
Things You’ll Need
In order to manually open your pool, you’ll first need to gather a few essential tools together. These are things like a level, a wrench, a flashlight, a crowbar, a hammer, a screwdriver, a small toolkit, and a notebook or a clipboard. It’s always good practice to have multiple tools around just in case something goes wrong. This is why it’s best to keep all of these items within reach. This will also prevent you from having to go searching for them when you’re already in the middle of something else.
Besides having the tools, you’ll also need someones hands to help you put them to use. If you’re the type of person who enjoys doing things yourself, you might want to consider getting a second set of hands. This way, you’ll have someone to assist you while you work on manually opening your pool. If this is somewhat difficult for you, then you could ask a family member or a friend to accompany you. This would be helpful because it would allow them to assist you while you work on opening the pool. After all, they may be more accustomed to dealing with complicated tasks such as these. So by having some help, you’ll be able to get the job done much more quickly and easily.
How To Open A Pool Using A Level And A Ladder
If you’ve got a particularly large pool, you might want to consider using a level and a ladder. This is especially so if you’ve got a problem with your pool cover sinking into the water. In this case, you could position the ladder on the outside of your pool, next to the corner where the wall and the deck meet. With the level, you’ll be able to position it near the surface of the water so you can get an accurate measurement. A good rule of thumb is to measure the water level every two weeks during the summer months and then add or subtract a cup or so, as needed.
When you’ve got the level and the ladder positioned correctly, you can get to work on opening the pool by using the following steps:
- Wet down the area where the pool meets the ground to remove any excess moisture. This will help prevent mildew and mildewed pipes. Once you’ve done this, it’s time to commence moving the water inside the pool. Begin by pouring some water into the empty space next to the ladder. This will act as a placeholder for the water you’ll eventually transfer into the pool.
- Next, you’ll want to take the ladder, and placing it on the ground, climb up and pour water from the top rung down towards the bottom. When you reach the bottom rung, turn right and pour water towards the corner where the pool meets the deck. Remember to use the ladder to maintain a safe working area. If you’re carrying the flashlight, you can also use it as a spotlight to check for any places where there’s an obstruction that could potentially cause damage.
- Repeat this process, alternating from the bottom to the top rung, until the entire area is completely filled. You’ll want to do this one section at a time so you can get the job done efficiently.
- Once you’ve filled the area near the bottom, go back and check for any dripping or spillage near the top. If you notice any spots above you, then it’s time to come down and finish the job. Before you do this, though, it’s a good idea to walk around the pool and check for any areas where there’s a pool deck near the house. This could be an easy way for you to get some cardio in and open up your pool without having to do too much thinking. Just make sure you stay hydrated and avoid overexertion, especially if this is your first time manually opening a pool. Remember: it’s better to be safe than sorry. And if you’re feeling particularly adventurous, you could always pour the contents of a soda can into the pool. Not only will this add a nice citrusy flavor to the water, but it might also add a little bit of excitement to your morning swim.
How To Open A Pool Using A Chain Saw
If you’ve got a lot of space and a lot of time on your hands, you might want to consider using a chain saw. This is especially so if you’ve got a problem with your pool cover and you can’t seem to remove it by any other avenue. You could cut a large hole in the roof of your pool to allow for some fresh air to circulate, preventing any potential problems with your health.
The first step will be to cut a small square piece of wood at the peak of your pool. Once you’ve done this, it’s time to cut a few more, evenly spaced out along the length of your pool. Make sure you’ve got plenty of room to work and that you’ve got all the proper safety gear and protective clothing. You’ll also need a chain saw that’s suited for cutting through wood with an 8-inch blade. It’s also a good idea to wear gloves during this process, just to prevent any potential injuries. After all, you’ll be cutting through some very sturdy and thick material. Once you’ve got all the pieces cut, it’s a simple matter of lifting them up and placing them around the perimeter of your pool.
This should allow fresh air to circulate and prevent any sort of problems with the health of your pool user. Just remember: be careful, and remember to work slowly and carefully so you don’t cut yourself. Once you’ve placed all the pieces around the pool area, it’s time for the last step. Wet down the entire area with a hose to remove any sawdust. And after you’ve done this, it’s time to enjoy your pool with family and friends throughout the summer.
So which method did you use? If you haven’t tried any of these methods, then it might be a good idea to avoid using any power tools to open your pool. These sorts of methods are great when you’re sure that there’s no power outage in the area. But if there is, then you’ll be out of luck. It would also be wise to avoid these types of methods if you live in a region where heavy rains are common. In this case, you might want to consider using a pool cover instead, or even closing it down during the bad weather to prevent any sort of damage.