One of the great things about having a pool at home is the fact that it offers more than enough space for swimming pools and relaxing days outside. However, if you decide to install an above ground pool, there are a few things you need to know to enjoy its benefits without any hassles. Below are some of the things you need to know about opening drain on a Bestway above ground pool.
First, ensure that your pool is fitted with a built-in water softener and pH adjuster. These two systems work together to soften and cleanse the water before it is re-circulated back into the pool. Second, you need to consider the size of the pool. Obviously, a larger pool will offer you more space to swim and play in. Third, measure the width and length of the pool to determine how much room you have for movement. If you have a small pool, consider installing pool cues or the like to give you some more space.
Table of Contents
How To Open Drain On A Bestway Pool In-pool
If you have a pool in the traditional sense, that is, located outdoors and filled with water, then the easiest way to drain it is simply to open the drain valve at the bottom. However, if your pool is above ground, then you will need to find a way to drain it manually. Fortunately, there is a way to do this through the use of a vacuum hose that is connected to the pool’s drainage pump. Begin by winding the vacuum hose around the drain valve at the bottom of the pool. Next, turn the handle of the pump to engage the blades, and begin lifting the hose up and down to create a partial vacuum within the pool. When the vacuum is strong enough, the water will begin to collect at the top of the pool, gathering there until it reaches the proper level for draining. When this happens, turn off the vacuum pump and the drain will be open. It is a simple matter to close the drain by turning the handle back the other way and letting gravity do the rest.
Why Can’t I Simply Turn The Valve At The Top Instead Of At The Bottom?
In a traditional swimming pool, the drain valve is located at the bottom. Sometimes, especially with larger pools, this can be difficult to reach when you are above the water line. If you have an in-ground pool, this is easily overcome by installing a ladder so you can reach the top. However, with an above ground pool, this becomes a bit more difficult and there are a couple of reasons why.
One is that if you have a larger pool, the chances are you will have a cover on it. When this is the case, it becomes difficult to reach the drain valve at the top when the cover is in place. Another reason is that when the pool is not being used, you will usually find the drain valve closed due to the lack of water in it. Since there is no water pushing the valve at the top, it will remain closed even when the pool is at its proper level. This is why it is best practice to always open the drain valve at the bottom when using an above ground pool.
How To Open Drain On A Bestway Pool Without A Vacuum Hose
If you do not have a vacuum hose, then you will need to find a way to lift the water manually. For larger pools, this can become tricky. If you have a smaller pool, then it will be relatively simple. You will simply need to reach up with a bucket or other container and collect the water as it accumulates at the top. When the container is full, empty it into the next and keep doing this until the water accumulates at the proper level for draining.
How Do I Properly Shut The Drain When I Turn The Pump Off?
When you turn off the pump, there is no reason for the drain to remain open as it is no longer under pressure. However, if there is still water at the top of the pool, then this is simply because it was too early to close the drain. Once the water reaches its proper level for draining (usually 1-2 inches above the top of the pool), then it is time to stop letting gravity take its course and time to let the water settle for a minute before turning off the pump. While this is happening, it is best to leave the drain open as you do not want to turn off the pump and leave the drain closed when the water is still circulating within the pool because this could cause serious flooding within your home. Once the minute is up, then turn off the pump and the drain will be closed and ready to be opened when needed again.
How Long Does It Take For The Water To Level Out Once The Pump Is Turned Off?
This will depend on a few factors, but it usually takes a couple of minutes for the water to stop circulating and begin falling due to gravity once the pump is turned off. Keep in mind that this is not a moment to rush as you want the water to settle for a minute or two before turning off the pump.
Does The Shape Of The Pool Influence The Way In Which It Is Drained?
The shape of your pool will determine how it drains. If your pool has a flat bottom, then it will drain in a rather straight line toward the drain valve at the bottom. If your pool is more rounded in shape, then it will assume a circular pattern as it drains, making a full circle before returning to the beginning. The shape of your pool does not really matter as much as the material the pool is made of and whether or not you have a cover above it.
In conclusion, if you have a traditional swimming pool, then the easiest way to drain it is to open the drain valve at the bottom. However, if your pool is above ground, then you will need to find a way to drain it manually. Fortunately, there is a way to do this by using a vacuum hose connected to the pool’s drainage pump. If you do not have a vacuum hose, then you will need to find a way to manually lift the water or you could simply use an empty bucket to catch the water as it accumulates at the top of the pool. When the water reaches its proper level for draining (usually 1-2 inches above the top of the pool), then it is time to stop letting gravity take its course and time to let the water settle for a minute before turning off the pump. While this is happening, it is best to leave the drain open as you do not want to turn off the pump and leave the drain closed when the water is still circulating within the pool because this could cause serious flooding within your home. Once the minute is up, then turn off the pump and the drain will be closed and ready to be opened when needed again.