How To Raise Chlorine Level In Salt Water Pool? [Ultimate Guide!]

Spread the love

If your saltwater pool does not contain enough chlorine to keep the water safe to swim in, then you have to increase its chlorine content. The easiest way to do this is by adding some chlorine gas through a gas diffuser or an automatic chlorinator. However, adding too much chlorine can be dangerous, so it is important to find the right amount. This article is going to tell you how to raise the chlorine level in your saltwater pool up to the right amount, so you can enjoy the beautiful scenery of a shimmering saltwater pool without any worries.

Chlorine Level Should Be At Or Above 4.0 PPM

Chlorine is a halogen and is highly toxic in large quantities. According to the Centers for Disease Control and Prevention, there are no safe levels of chlorine when ingested by humans. This extremely toxic chemical can cause severe health problems, including damage to the nerves and immune system. The agency also advises that people avoid contact with, and intake of, chlorine-containing chemicals. Since there are no safe levels of chlorine, you have to be very careful when determining how much of this chemical you want to add to your pool.

Even though the risk of chlorine toxicity is very small, it is still important to remember that too much chlorine can be very dangerous. Studies have shown that swimming pools with a chlorine level of 10.0 parts per million (ppm) or above can become infected with fungus and bacteria. This is why it is important to keep an eye on the chlorine level in your pool and make sure it is always maintained at or above four ppms. You can also test for chlorine levels in your water using a simple portable test kit that you can get for free from most hardware stores.

Only Add Enough To Sufficiently Alarm The Pool’s Security System

It is very important to only add enough chlorine to your pool to sufficiently alarm the security system. You do not want to put in more than is necessary to attain the proper level of chlorine, as this will increase the risk of overdosing and causing health problems. The security systems of most pools are designed to detect the presence of harmful chemicals, so if they do not detect your chosen level of chlorine, then they will not sound an alarm. This means that you have added more chlorine than is necessary and will have to take some away. Fortunately, there is an easy way to test if your security system is responding to the chlorine you add to the pool.

To do this, pour some water into a bucket and then set up the security system. If the system beeps once or more during the course of a half hour, then add more chlorine. If it does not beep at all, then remove some chlorine. Following this test protocol ensures that you do not overdose your pool and cause health problems. This article will walk you through the steps to take to properly raise the chlorine level in your saltwater pool.

Chlorine Is Safer If Added At Night

According to science, chlorine is better absorbed into the water during the night rather than during the day. This is because there is less light available which means that there is less of a chance of over or underdosing. If you add the chlorine at night, then there is less of a chance of overdosing. During the day, the Sun’s rays are strong and can greatly increase the likelihood of over or underdosing. Adding chlorine at night ensures that you will never overdose, or underdose, your pool. This is important, as you can always wake up in the middle of the night to check on the chlorine level and make sure it is still acceptable. If you add the chlorine during the day, then you run the risk of overdosing or underdosing your pool. This is why it is safer to add chlorine at night, ensuring that you will always add the right amount.

Use A Digital Chlorine Maintainer

If you are adding chlorine by tablets or liquid drops, then it is important to use a digital chlorinating device. These will store the amount of chlorine added each time they are used and can be set to either automatically or manually add more chlorine as needed. Some of these devices are even intelligent enough to know when and how much chlorine to add based on the pool’s recent history of usage. If you want to raise the chlorine level in your pool, then using a digital chlorinating device will make the process much easier and safer. Just make sure that you always test your pool for chlorine levels after using this type of device and remove some if necessary.

Regular Testing

It is very important to test your pool regularly for chlorine levels. If you add more chlorine than what is required, then this can lead to serious health problems. To test for chlorine levels, simply pour some water into a bucket and then check for the presence of a strong chlorine smell. If you smell the chlorine, then the pool is ready for use and you do not have to worry about overdosing. If you do not smell any chlorine, then it is a good idea to remove some chlorine from the pool.

Properly raising the chlorine level in your pool is very simple. All you have to do is follow the instructions below and you will be able to enjoy your pool without any worries.

Do NOT follow this link or you will be banned from the site!