People are always looking for ways to brighten up their pool water and make it more crystal clear. But have you ever wondered about how this happens and whether this could be a bad thing? Believe it or not, removing calcium from your pool water is a lot easier than you think. In fact, it can be done with a few simple steps without having to go under the water for too long. So let’s get into it. Here are the top 5 ways to remove calcium from your pool water:
Table of Contents
1. Use Alkaline pH
The first step towards removing calcium is to control the alkalinity of your pool water. A lot of the time, calcium tends to bond with alkaline metals like sodium and potassium creating a kind of hardened substance that ends up blocking the filtering system in your pool. To combat this, make sure you reduce the amount of alkaline metals in your pool water. The easiest way to do this is with an alkaline pH meter. These are fairly easy to use and will indicate whether or not your pool water is at an acceptable level of alkalinity. If it’s not, then you can be certain that there’s a lot of calcium in there. A good rule of thumb is to keep your pool water pH between 7.2 and 8.4.
2. Use Chlorine Dioxide
An alkaline pool water can still have a lot of calcium in it. Chlorine dioxide is the chemical that keeps your pool fresh and clean. When inhaled or ingested, it has been known to remove certain metals like arsenic and lead from the body. Chlorine dioxide is also known to be an effective water treatment for ridding your pool of harmful bacteria and algae. It’s a good idea to add a few drops of this to each gallon of water you put in your pool. As it is a liquid, this is much easier to regulate and apply than regular pool chlorine which can be a few degrees more concentrated. A few drops of this stuff in your pool water every week or two will keep the buildup of minerals to a minimum.
3. Use Iodine To Break Down Calcium
If you’re not familiar, iodide is a chemical that is very stable and easy to use. When used in chemical combination with a bit of chlorine, it has the ability to break down calcium into a form that is easily removed from the water by filtering methods. That’s all you need to know for now. Just keep in mind that this is a time-consuming process and will take several weeks or months to see results. Nevertheless, it’s a good idea to test the purity of your water before and after applying this treatment. You can also try adding a drop of essential oil to your pool water as this may also increase the effectiveness of iodide in breaking down calcium. But, make sure you have the scientific knowledge necessary to apply essential oils safely around water.
4. Use Baking Soda To Neutralize Calcium
Another great way to remove calcium from your pool water is to use baking soda. Similar to aluminum, calcium bonds with baking soda creating an insoluble compound that can be filtered out. Just add some to your pool water and let it settle for a few minutes before checking for any signs of improvement. You should see a significant decrease in the minerals within a few weeks of applying this method.
5. Use Milk of Magnesia To Remove Calcium
A lot of alkaline water is caused by high mineral content in the water source. When this occurs, it tends to become hard and opaque which makes it difficult for the body to absorb the nutrients in the water. One of the best solutions is milk of magnesia. This is a substance that comes from milk and has the ability to remove calcium from your pool water. Just add some of this to your pool and wait for a few minutes for the nutrients to do their work. You may have to try this method a few times before you see results.
As you can see, there are several ways to remove calcium from your pool water. But the key is to keep an eye out for sources of contamination. You don’t want any metals or solids entering your pool system because this will ultimately cause health issues for you and your family. The best thing you can do for your health is to keep the water clean. So make sure you maintain your pool and check for signs of wear and tear. Also, make sure you have the proper filters for your pool and change them often. When you do, you’ll notice an improvement in both the appearance and the quality of your pool water. And don’t be afraid to use these methods to help improve the quality of your pool water. As long as you keep an eye out for signs of contamination, you’ll be able to create a crystal-clear pool that you and your family can enjoy for years to come.