How To Remove Solid Particals In Pool Water? [Updated!]

Spread the love

There are many times when you just can’t avoid getting water in the pool. Whether it’s due to an overflowing toilet or a sudden downpour, sometimes you just have to let go and deal with it. The big problem is removing the water containing all those nasty particles you just know are in there. Usually these particles are invisible to the naked eye but once you look at the water under a UV light it becomes apparent how awful it is. You’ll be removing all kinds of stuff from the water including hair, fibers, skin cells, and even some plastics. That’s a lot of stuff that could end up in an actual landfill so it’s imperative you know how to remove it from your pool! In this article we’ll cover some basic information about solid particles in pool water and how to handle them once you know what they are.

What Are Solid Particles?

When you have water in your pool, occasionally you’re going to have particles in it. You might think that all the water in your pool is perfectly clean but when you look at it under a UV light you’re going to see that a lot of it is actually fairly muddy. When you’ve got floating solids in your pool, they’re called “solid particles.”

Solid particles are everything from the tiniest bit of lint to large hunks of plastic. Anything that’s visible to the naked eye is considered solid particle pollution and it definitely doesn’t look or feel like real water. To prevent future problems, it’s important that you get rid of these particles in your pool as soon as possible. To do that, simply follow these steps:

Get Your Pool Vault Skimmer

If you live in an area where a lot of flooding is a concern and you’re worried that your pool is going to get clogged with debris, then getting a skimmer is a good idea. A pool skimmer catches all that stuff before it gets in the pool and pumps it out. They’re easy to use and install, and they require very little maintenance; just make sure you change the oil every three months or so and remove any hair or fibers that might have been caught in the mechanism.

Installing a skimmer is relatively easy. Most pools come with one installed already so all you have to do is connect the drain hose from your pool to the inlet on the skimmer. Make sure you have some sort of cover over the pool to keep the sun’s heat from causing any damage. This connection should be made about three feet above the water line so that any excess water can drain away smoothly. Once the connection is made, you can open the water valve and let the water flow into the skimmer. It takes a couple minutes for all the water to settle before you can actually start using it.

Use Chemicals ToClean Your Pool

Another great way to remove solid particles from your pool is with chemicals. There are actually two types of chemicals commonly used for this purpose: chlorine and monochloracetic acid. Most pools are cleaned with chlorine but if you want to use monochloracetic acid (MCA) then be sure you understand how it works differently and what effects it might have on your pool.

Chlorine is going to be pretty effective at removing dissolved solids from your pool. It doesn’t hurt the water in any way but it does change it in various ways. First, the color will darken as the chlorine molecules bind to the water molecules. Chlorine is also great at killing algae and germs in your pool so it’s crucial you use it often.

MCA is somewhat less effective at removing contaminants from your pool. What it does is help break down the molecules that make up the contaminants so that they can be more easily flushed away. Even some of the simpler home remedies might have mca as an ingredient so if you suspect that something is making your pool dirty then try some of those out before you get a professional in.

The great thing about these chemicals is that they’re all naturally occurring substances that you can find in your local grocery store. Chlorine is even safe for fish and plants so it’s completely biodegradable. These chemicals should all be handled with care and only when needed but they’re effective at cleaning your pool in no time at all. Just remember that too much heat from the sun and friction from the water flowing through the pipes can cause chemical burns so don’t leave your pool uncovered for long periods of time.

Filter Your Pool Water

Solid particles are going to get in your pool no matter what so it’s important to keep them from building up. You can do this in a few ways; you can either get a quality filter or you can install a submersible pool pump. What the first option does is let through all the good stuff while keeping out all the bad stuff so that the water looks clearer and healthier when you step in for your morning swim.

A quality filter is something that actually removes all the pollutants from the water. When choosing a filter for your pool, make sure that it’s large enough to handle your pool’s water flow and that it fits snugly in place. You don’t want any free play in the filter because it might cause serious damage to your pool or its contents. The best type of filter for your pool is a synthetic fabric filter because they’re going to be large enough to handle even the most extreme water flow, they’re easy to clean, and they don’t absorb any odor.

Dissolve The Particles In Your Pool

Once you’ve removed all the solid particles that are in your pool (either with chemicals or a filter), you have to make sure that the water is completely clean. It’s easy enough to test your pool water with a simple urine test at home but if you find any particles left behind then it’s time to worry. The most effective way to ensure that all the contaminants are gone is by actively dissolving them in your pool water. You can use some of the substances from your toilet paper or wipe, or you can get some chlorine tablets and crush them up and dissolve them in the water. Whatever you do, make sure that the water is completely saturated for about twenty minutes before you continue using the pool.

Once you’ve dissolved all the solid contaminants in your pool, it’s time to relax and enjoy your pool. It’s easy enough to keep it clean when you’re using these tips and for people with limited access to health problems, it’s completely doable. Always remember to test your pool water for pathogens and ensure that it’s safe for swimming before you let your family and friends swim in it. When it comes to keeping your pool clean, it’s important not to be too extreme because too much cleaning can cause your pool to become less attractive and less healthy. You want your pool to be crystal clear and free of any particles so that it can retain its pristine beauty.

What About Hair, Fibers, And Other Non-Solid Particles?

If you or someone in your family has a history of hair loss or health issues related to the skin then it’s a good idea to get a quality water filter. These types of filters are going to keep all kinds of stuff from entering your pool including microscopic hairs, skin cells, and even some small plastic parts. If you want to keep your pool clean then it’s definitely worth the effort because you’re going to be removing all those irritating particles that are in there. Just know that these types of filters are more complex and more expensive than normal filters because they’ve got to deal with all that hair and other large foreign bodies that could get stuck in the mechanism.

Swimming with hair in your pool isn’t good for you so even though it’s relatively small in scale, it’s still a problem. When you have hair in your pool, it’s a sign that you’ve either been swimming with your towel off or you’ve just done a complete body wash. If you’ve been swimming with your towel off then it’s a sign that your hair has definitely been entering your pool. You can’t control how your hair bounces around while you swim so it can end up in the water whether you want it to or not. This is why it’s important to always wear a towel when you swim. Even small amounts of hair in your pool are going to clog up the filter quickly so if you’ve got any at all then it’s time to change it.

Fibers are also going to make your pool look distinctly different. When viewed under a UV light, a lot of the water in your pool is going to fluoresce a bright blue which is what makes it so easy to identify. Blue is also a healthy color for your pool so don’t be afraid to add it as an accent color or as the base color of your swimming pool. Adding a little flare to your poolside with some brightly colored umbrellas or lanterns is also a great way to increase its appeal.

Do NOT follow this link or you will be banned from the site!