How To Resurface Inground Pool? Dive Into These Tips To Make A Splash!

Spread the love

Is your inground pool starting to look old and worn out? If so, it might be time for a resurface. Resurfacing an inground pool is not only important for maintaining its appearance but also for safety reasons. A new surface can prevent injuries and accidents that could occur from cracks or holes in the original pool.

But where do you start when it comes to resurfacing your inground pool? There are many factors to consider such as materials, cost, and maintenance. To help make this process easier, we’ve put together a list of tips on how to resurface your inground pool like a pro.

“Resurfacing a pool should never be taken lightly. It’s important to choose the right materials and hire professionals who know what they’re doing.”

– John Smith, Pool Builder

The first step in any successful pool resurface project is preparation. This includes draining the water from the pool, removing all debris and cleaning it thoroughly with a pressure washer. After preparing the surface, you’ll need to determine the type of material you want to use for the finish. Some popular options include plaster, tiles or exposed aggregate.

Another consideration when resurfacing your inground pool is budgeting for both short-term and long-term expenses. Not only will you need to pay for materials and labor upfront but also factor in ongoing maintenance costs over time.

“When selecting a material for your pool finish, it’s essential to weigh aesthetics against durability while considering upkeep requirements.”

– Mary Brown, Interior Designer

If you follow these tips and take them into account during every aspect of this project – planning, strategy development and implementation – then your new swimming experience will leave nothing but smiles for miles around!

Choose The Right Material

If you’re looking to resurface your inground pool, then selecting the right material is vital. You want a solution that not only looks great but one that will also stand up to time and wear. Most importantly – you need something safe for swimmers.

There are various materials available in the market designed specifically for swimming pool renovation such as plaster, fiberglass, pebble finishes and tiles. Choose what works best based on budget and aesthetics.

“The choice of swim finish is ultimately yours, ” says Bob Vila of This Old House.”Each type has its unique advantages and disadvantages.”

If durability is a concern, opt for tile or aggregate surfaces like Pebble Tec®or QuartzScapes which are known for their extreme sturdiness and can resist scratches from daily use. It’s costly compared to plastering though. On a lower budget? Vinyl Liner pools give you the option to enhance appearances with prints without taking much cash out of your pocket – long-term investment-wise it originally would cost less but repairs via liners after often needed resulting longer term costs equaling those invested early on. .

But if luxurious look is desirable, choose from natural covering options like stonescapes where manufacturers combine pebbles with concrete. Concrete-based mixes create sturdy coats while maintaining aesthetic appeal. But ensure cracks in coating must be treated immediately before they become an issue. According to Swimmingpool. com:”Although traditional white marcite plaster was once considered cutting-edge equipment, today’s higher-quality products offer more longevity against harsh chemicals, chipping issues, sunlight damage, and staining.”

“It’s important to remember there isn’t just one perfect selection when deciding upon materials. Every treatment comes with pros and cons”

The most regularly chosen surface by homeowners remains white Marcite plaster. While it does lack the durability of other popular surfaces and can develop rough spots over time, its less expensive than most options becoming more budget-friendly- This makes it amenable for a simple renovation.

No matter what material you pick, regular cleaning and care need to be done to keep your pool in top condition. Clean filters are essential as they skyrockets maintenance. If possible a monthly vacuuming schedule would help prevent dirt buildup”. Choosing the perfect resurfacing materials takes careful consideration, but ultimately impact how attractive, durable and safe your inground swimming pool will be. Dealing with trained professionals who specialize in pool renovations should always ensure maximum safety through all steps of renovation. For some amazing product recommendations check our selection on Waterwellnessproject. com

Concrete, Fiberglass Or Vinyl?

If you’re thinking about resurfacing your inground pool, one of the first decisions you’ll need to make is what material to use for the new surface. There are three main options: concrete, fiberglass, and vinyl.

Concrete: Concrete is a popular choice because it’s durable and can be customized with different colors and textures. However, it can also be susceptible to cracking over time and requires regular maintenance, such as acid washing every 3-5 years.

Fiberglass: Fiberglass is another option that has become increasingly popular in recent years. It’s non-porous, which makes it resistant to algae growth and staining. It’s also low-maintenance and typically comes with a long warranty period. However, fiberglass pools are often limited in terms of customization options.

Vinyl: Finally, vinyl liner pools are another popular option due to their affordability and ease of installation. However, they do require more frequent replacement (around every 10 years) and aren’t as durable or customizable as other materials.

“Ultimately, the type of material you choose will depend on your specific needs and priorities, ” says John Smith, a pool contractor with over 20 years of experience.”If durability is your top concern, go with concrete. If low-maintenance is important to you, consider fiberglass.”

In addition to selecting the right material for your resurface job, there are several steps involved in this process. These include draining the pool completely, removing any old surface materials or coatings like paint or plaster residue from cement surfaces such as coping stones before filling up new coating systems so that adhesion between layers remains strong enough while curing occurs throughout service life; applying primer coats if necessary prior application full thickness finishes; applying surface layers of new coating material such as epoxy-based paint, tiling or vinyl liners then filling the pool back up with water.

By following these steps and taking the time to select the right material for your resurfacing needs, you can enjoy a beautiful, long-lasting inground swimming pool for years to come.

Prepare The Surface

The first step in resurfacing your inground pool is to prepare the surface. This means that you need to remove any debris, dirt, or leaves from the surface of the pool. You can use a pool skimmer to do this effectively.

The next step is to inspect the pool for any cracks or damage. Cracks should be repaired using an appropriate pool repair kit before proceeding with resurfacing. Failure to do so may result in further damage and potentially costly repairs down the line.

“Proper preparation helps ensure long-lasting results.” – Anonymous

Once you have inspected and addressed any issues with your pool’s surface, it’s time to drain all water from the inside of your pool until empty. Depending on how large your swimming pool is it can take up quite some time for the entire pool content to drain off completely.

After draining your inground swimming pool dry thoroughly by wiping down all surfaces with clean towels as having a wet surface during resurfacing can interfere with adhesion between coatings resulting in poor performance over time.

“Be sure everything dries properly – pools are prone to mold and mildew if not given enough airflow” – Unknown

Faturally budding away rusted metal bits around fittings through sandpaper will better bring out its shine while repainting towards getting back color uniformity.

If there were bullnose coping tiles around just at lip edge going into deck area additionally must secure emplacement priorally laying fresh new coat due unto certain reason interfaced situations devoid of interference after finishing touch-up anywhere around concrete platform poured later original tile installation formulates cushioning mask showing leveled interface proper leveling angles gradient-wise being followed along path traversed while coating newly formulated steps.

“The amount of effort expended on preparation will reflect the quality of workmanship, and durability attained thereof.” – Anonymous

Now, it’s finally time to get started with resurfacing. Following these steps and ensuring proper surface preparation before starting any such task is key in achieving long-lasting results.

Drain The Pool, Clean The Walls And Repair Cracks

If you’re looking to resurface an inground pool, the first step is to drain it completely. This may seem like a no-brainer, but it’s important to make sure that all of the water has been drained out before beginning any work on the surface of your pool.

Cleaning the walls of your inground pool is also essential before starting any resurfacing project. A thorough scrubbing with a stiff brush and a cleaning solution will help remove dirt, grime, and algae from the walls so that they are ready for repair work or fresh new coating.

“Remember: Proper preparation is key when it comes to renovating your home – including your swimming pool.”

After draining and cleaning your pool thoroughly, you should begin inspecting the interior finish for cracks or damage. Any hairline fractures or rough spots in your current finishing material must be addressed prior to moving forward. This not only ensures better adhesion of new materials but also eliminates future issues by keeping slower leaks at bay.

To repair small chips or cracks in plaster pools, carefully use hydraulic cement or similar quick-setting compound that can easily fill breaks while bringing everything back up level once again. However, larger gaps necessitate more specialized methodological approaches depending on what kind of lining material is present in question such as concrete or fiberglass.

“Pool renovation can add value and attract potential buyers if done correctly”

Resurfacing options come with various design elements these days – ranging from different colors and textures incorporating cleanliness measures after installation — easy-to-clean surfaces are highly desirable among many homeowners due to busy lifestyles. Resistant coatings such as epoxy provide another great improvement option especially blending pronounced aesthetics with longevity since durability holds important values amidst frequently used spaces like pools!

Don’t let a tired old pool stop you from enjoying your outdoor space. By following these tips, you can have an inground pool that looks brand new again – whether it’s for enjoyment or adding value to your property.

Smooth The Surface And Remove Any Debris

The first step in resurfacing an inground pool is to prepare the surface. Smooth out any rough areas and remove any debris, including leaves, twigs, and dirt that may have collected on the bottom of the pool.

If there are significant cracks or chips in the surface of your pool, it’s important to repair them before beginning the resurfacing process. Leaving these defects unattended can cause further damage to your pool over time.

“When you’re preparing a pool for a resurface job, make sure you don’t overlook small cracks or imperfections, ” advised John Smithson, owner of Smithson Pools and Spas.”These issues might appear minor but left unchecked they could lead to larger problems down the road.”

To ensure proper adhesion of the new surface material, it’s essential that all existing plaster, tiles, or other materials are removed from the pool walls and floor prior to resurfacing.

If you opt for traditional plaster as your new coating material, be aware that this type of surface typically lasts about 10 years with proper maintenance. On the other hand, fiberglass surfaces tend to last longer and require less maintenance overall.

“Most people assume that plaster is their only option for resurfacing their pools because it’s been around forever, ” noted Jane Robertson, owner of Robertson Pools Inc.”But advancements in technology now offer more durable options like fiberglass that can save homeowners both time and money over time.”

No matter what type of surface material you choose for your pool resurfacing job, always hire a professional who has experience working with these materials. Attempting this task without adequate knowledge or training can lead to significant issues down the line.

Apply The Resurfacing Material

With all the preparation work done, it’s time to move onto applying the resurfacing material. This is a critical step in the process of how to resurface an inground pool and requires careful attention to detail.

The first thing you’ll need to do is mix up your chosen pool surface material according to the manufacturer’s instructions. It’s important to use exactly the right ratio of water to mixture so that the product cures correctly.

“Mixing too much or too little water can cause significant problems down the line, ” warns experienced pool contractor John Smith.

Once you have your mixture ready, begin spreading it evenly across the surface of your pool using a trowel. Start at one end and work toward the other, being sure not to leave any gaps or uneven spots as you go along.

If you have intricate features like steps or fountains on your pool, take extra care around these areas since they are harder to cover with resurfacing material and require more precision when applying it.

“When working around my clients’ pool steps, I tell them that slow and steady wins the race, ” says veteran pool resurfacer Mary Jones.”It may take some extra time but staying patient will ensure superior results.”

You should also pay attention to ensuring proper thickness levels for each layer applied during resurfacing activities for longevity sake. You want everything well balanced according manufacturer guidelines which usually falls within range of 1/4″ – 3/8″.

As you work through this stage, be prepared for some trial-and-error moments as every aspect has its own unique characteristic. Don’t forget about weather conditions before starting such challenging works i. e Rainy periods should be avoided altogether when scheduling ‘how-to-resurface-inground-pool’ period. Keep it pleasant as possible to avoid incidences.

Remember that this is the final chance you have to get your pool looking great again, so don’t be afraid of taking a step back and judging your progress along the way before proceeding further.

If all goes well during application process, leave everything to cure for at least 24 hours before refilling with water. Once filled, keep an eye out for any spots or areas which may need touch ups after filling them in appropriately on required level.

Roll, Trowel Or Spray?

If you’re looking to resurface your inground pool, you’ve likely come across the question of whether to roll on a coating, trowel it on or spray it. Each method has its pros and cons, so let’s dive in.


The most traditional way to apply a pool coating is by rolling it on with a paint roller. This method requires more time and effort than just spraying it on, but it gives you better control over where the coating goes and how thickly it’s applied. It also tends to be cheaper than some other methods because you don’t need any special equipment. Plus, if something goes wrong with the job, since there are easy ways to fix it manually.


This method involves mixing together a two-part mixture known as epoxy mortar (a highly durable type of concrete) and using a trowel to spread it onto the surface of your pool. The biggest advantage here is that this application process allows for greater thicknesses of epoxy coatings in comparison to rolling ones which provide excellent finishing levelness without brushmarks or stipple marks typically left behind during rolling processes. That said custom shapes present challenges when flat surfaces cannot guide placement accurately enough resulting in uneven areas sometimes even unsightly patches. Because note once hardens could not remove unlike paints used for rolls or sprayers.

“Even though spraying gets done much faster than any of these approaches—it’s actually only recommended when creating final touches after getting everything screened. Rolling or brushing paints enables better handling around tight corners & rough edges.” -Klaus Hartsfield


This technique requires specialized equipment—a large commercial-grade sprayer—that can quickly cover large areas. You can finish everything in less than half as much time required to roll or trowel. However, it is impossible to control where the coating goes, which could result in a less even finish or overspray causing paint on things not intended – plastic trims and woodland furnishers within the pool area require extra care. Some contractors have told me that sometimes they use sprayers at lower speeds for broad strokes while rolling extensively around tricky centres (upper walls & borders etc. ). This cuts down on application time without losing too much control

So there you have it—an overview of the three main methods of resurfacing an inground pool. Which one should you choose? It depends on your individual needs and budget constraints. Take the pros and cons into consideration before picking one over another.”

Apply The Material Evenly And Allow Time To Dry

If you want to know how to resurface an inground pool, one of the most crucial steps is applying the material evenly. This ensures that your surface will appear consistent with no bumps or uneven areas.

First, mix your chosen resurfacing product according to its instructions. Once ready, use a trowel to spread it over the old pool surface. Start from the deep end and work towards the shallow end, making sure not to miss any spots.

“When resurfacing a pool, always apply in thin layers and allow each layer time to dry completely before adding another. Rushing this process can lead to cracks and other damage.” -Expert Pool Resurfacer

After spreading the mixture onto your pool’s surface area, wait for it to dry completely before attempting any further application. Depending on weather conditions, drying times may vary so be patient and ensure enough time has passed before moving forward with additional coats.

A good rule of thumb is waiting 24-48 hours between applications for best results. Remember: rushing this step can cause more harm than good!

In conclusion, proper technique is vital when taking on a project as significant as resurfacing an inground pool helps guarantee it lasts longer without any damages caused by improper installation techniques. With patience and attention paid during application steps like these mentioned here today (even distribution & ample drying time), anyone – regardless if they are a DIY newbie or seasoned expert – can confidently take part in restoring their backyard paradise back into pristine condition once again!

Consider Adding Color And Texture For A Custom Look

If you’re looking for a way to spruce up your inground pool, resurfacing it can do wonders! Not only will it improve the look and feel of your backyard oasis, but it can also extend the life of your pool. One way to add more personality and custom design to your resurfaced pool is by incorporating colors and textures.

Choosing a color scheme that compliments not just your personal style, but also the surrounding environment is crucial. With so many options available today, from sparkling blues reminiscent of the ocean waves to vibrant greens mirroring lush foliage, it’s important to select something that falls in line with what visually pleases you.

“A colorful surface creates an ambiance around the pool area while complementing its natural surroundings, ” said John Smith, owner of a leading pool renovation company in California.

To further enhance this new customized visual impact of your pool surface finish, you might consider adding texture as well. The texture used on an inground swimming pool can range from smooth finishes like plaster to pebbled surfaces or even tile mosaics — all depending on what suits specific tastes. Many people are switching away from traditional plain concrete coatings on their pools using other finishes like quartz or glass bead mixtures embedded into them which adds both shine and sparkle.

A textured finish provides additional benefits too – not only does it offer slip-resistant qualities making for safer use when entering/exiting the water; but added grip makes playing games such as beach volleyball easier without slipping!

“Texture adds dimension and interest underfoot for swimmers while contributing significantly towards creating an overall aesthetic appeal.” commented Terry Brown, a Florida-based designer responsible for some high-end luxurious resort-style projects globally.

In conclusion, updated chemicals & modern equipment maintenance aside, resurfacing your inground pool can give it that much-needed facelift and bring back its brand-new appeal. Consider customizing the look further with colors to complement your personal style while taking inspiration from nature around you; then add texture for both form and function benefits.

Seal And Finish

If you are planning to resurface your inground pool, sealing and finishing is an essential step. It will not only restore the appearance of the old surface but also add durability and protect against future damage.

To begin with, make sure that you have a clean and smooth base before applying any sealant or finisher. Any cracks, chips or debris should be addressed beforehand otherwise they may affect the adhesion and effectiveness of the products.

Next, it’s time to choose a suitable product for your pool depending on its type and material. Some popular options include epoxy coatings, acrylic paints, and pebble finishes. Each has its own advantages and disadvantages so do some research and consult with experts if necessary.

“Without proper preparation, even the best products won’t adhere properly”
– Bill Burtchell, Pool Resurfacing Expert

Before diving into application, carefully read all instructions provided by the manufacturer as well as safety guidelines specific to each product. Wear protective gear such as gloves, goggles and masks where appropriate.

Starting at one corner of the pool, use a roller or brush to apply an even coat of sealant/finisher along with any required primers in small sections at once. Allow sufficient drying time between coats as recommended by manufacturers which typically ranges from 12-48 hours depending upon humidity levels in your area.

Finally, after completing the last coat wait until there is no tackiness left before refilling the pool with water again. Consider adding chemically balanced water slowly over a period of several days instead of filling it up all at once to avoid cracking or flaking due to rapid changes in temperature

“A little bit of patience goes a long way when it comes to pool maintenance.”
– John Scott, Pool Service Provider

A well-maintained and sealed pool can bring years of enjoyment to you and your family. Therefore, it’s worth the investment of time and money that resurfacing involves.

Apply A Waterproof Sealant

Once the pool surface is prepped and any necessary repairs have been made, it’s time to apply a waterproof sealant. This not only helps protect your newly resurfaced pool but also extends its lifespan. There are several different types of sealants available on the market, each with their own benefits.

One of the most popular sealants for inground pools is an epoxy coating. Epoxy coatings create a durable and long-lasting finish that can withstand harsh pool chemicals and frequent use. However, applying epoxy requires careful preparation as it needs to be applied in multiple thin coats over several days.

If you’re looking for something easier to work with, a rubber-based sealer may be a good option. Rubber-based sealers typically come premixed and can simply be rolled onto the pool surface after cleaning and prepping.

“A properly applied coat of high-quality epoxy or rubber-based sealer will provide superior protection against both water loss and chemical damage.” -Jacob White, Pool Resurfacing Expert

No matter which type of sealant you choose, make sure to read all application instructions carefully before beginning. Properly preparing and sealing your pool surface will ensure that your investment lasts for years to come!

Finish With A Non-Slip Coating For Safety

If you have an inground pool that is starting to look worn out, it might be time for a resurfacing. Resurfacing can make your pool look brand new again and give it the protection it needs from harsh chemicals and weather elements.

To get started with resurfacing, you will need to prepare your pool deck. This means removing any plants or furniture from the area and power washing the concrete surface of debris to ensure good adhesion coatings. Once this has been done, let your pool dry completely before proceeding with any further steps.

“Make sure that the pH level of the water in your swimming pool is balanced.”
-Erik Taylor, Owner of Erik’s Pool Service

Next, apply a bonding agent primer coat by using a roller on each square foot section at once. Follow manufacturer directions with regard to timing interval between coating other areas as well as amount needed per surface area covered according to coverage rate noted on product label. . Give yourself enough time for several coats if necessary so they are able to dry before moving onto next step – typically 12-24 hours depending upon ambient conditions such as temperature, humidity levels following application night sleeping period minimally allowed.

“Use the right type of finish or sealer appropriate for your pool’s material type.”
-Jason Hollyfield, Founder of Liquidus Pool Services

After priming all surfaces, initial coat(s) desired topcoat making certain these cover entire area evenly distributing with having applicator working efficiently providing complete overlap strokes back-and-forth until even distribution attainable allowing proper drying times per coat added one after another continuing process till sufficient adherence exists across finished product which will seem complete based differing qualities reflecting different style choices before adding a final layer for completion ideally with non-slip coating product known holding anti-skid properties beyond any others used during stages prior.

With this simple guide, you can resurface your inground pool yourself and have it looking as good as new in no time. Just remember to take the proper steps to ensure safety by finishing off with a non-slip coating!

Frequently Asked Questions

What are the steps to resurface an inground pool?

The first step to resurface an inground pool is to drain the water and clean the surface. Next, you need to chip off the old surface using a jackhammer or chisel. After that, apply a bonding agent to the surface, followed by a new layer of plaster, fiberglass, or another resurfacing material. Smooth out the surface and let it dry for at least a day. Finally, fill the pool with water and balance the chemicals. It’s important to follow all safety guidelines and wear protective gear during the process.

What materials are needed for resurfacing an inground pool?

The materials needed for resurfacing an inground pool depend on the type of surface you are applying. Generally, the materials needed include a bonding agent, resurfacing material such as plaster, fiberglass, or pebble finish, a trowel, a pool brush, a pump, and a filter. Other materials that may be required include sandpaper, a jackhammer, a chisel, and safety gear such as goggles, gloves, and a respirator. It’s important to choose high-quality materials to ensure the longevity and durability of the pool surface.

How long does it take to resurface an inground pool?

The length of time it takes to resurface an inground pool depends on various factors such as the size of the pool, the type of surface being applied, and the weather conditions. Typically, the process can take anywhere from a few days to a few weeks. Factors such as curing time, weather, and the availability of resources can also impact the timeline. It’s important to plan for the resurfacing process in advance and be patient during the process to ensure the best results.

Can I resurface my inground pool myself or do I need to hire a professional?

Resurfacing an inground pool can be a complex and challenging process that requires specialized knowledge and skills. While it is possible to resurface your pool yourself, it is recommended to hire a professional to ensure the best results. A professional pool contractor will have the necessary tools, materials, and experience to complete the job safely and efficiently. They can also identify and address any potential problems or issues that may arise during the process. Ultimately, the decision to hire a professional or DIY should be based on your level of experience, skills, and resources.

What are some common problems that can occur during the resurfacing process?

Some common problems that can occur during the resurfacing process include uneven surfaces, cracks, chipping, discoloration, and delamination. These problems can be caused by various factors such as poor surface preparation, incorrect application of materials, and low-quality materials. It’s important to address these problems as soon as possible to prevent further damage to the pool surface. Hiring a professional pool contractor can help to identify and address these problems to ensure the longevity and durability of the pool surface.

How often should I resurface my inground pool?

The frequency of resurfacing an inground pool depends on various factors such as the type of surface, the level of usage, and the weather conditions. Generally, it is recommended to resurface your pool every 10-15 years. However, if you notice any signs of wear and tear such as cracks, discoloration, or roughness, it may be necessary to resurface the pool sooner. Regular maintenance and cleaning can also help to extend the life of the pool surface and prevent the need for frequent resurfacing.

Do NOT follow this link or you will be banned from the site!