How To Sanitize Salt Water Pool Blood? [Fact Checked!]

Spread the love

Many a times, accidents happen at home that result in injuries. When this happens, it’s most likely that you’ll need to call for emergency assistance. Maybe you’ll need to be rushed to the hospital. This especially goes for injuries that involve blood, as you’ll be needing to stop the bleeding.

For those of you who have a salt water pool at home, you’ll be glad to know that you can easily and quickly sanitize the pool’s water to make it safer for kids and pets to swim in. All you need are some basic household items and a few minutes of your time.

Here’s how you can sanitize salt water pool blood:

Use Alcohol

The first and probably the most important step towards making your pool safe again is to use alcohol to clean it. It’s best to use a pool cleaning kit that naturally produces alcohol as part of its cleaning process. Otherwise, you’ll need to purchase it separately and pour it into your pool yourself.

As a general rule, it’s best to prepare for at least a month before using the pool. This will ensure that the water is at its clearest and that there are no germs or bacteria remaining in it. Most pool cleaners produce a sufficient amount of chemical splashing that a month’s preparation is usually more than sufficient. After all, you can always add more alcohol if you need to.

Dilute The Chemical

Once you’ve prepared your pool with alcohol, it’s time to dilute the chemicals. To do this, you’ll need to mix some fresh water with the pool water. The rule of thumb is one part fresh water to three parts pool water. This ensures that as you’re diluting, the pH balance of your pool will stay consistent.

It’s also advisable to filter the diluted water before using it again. This will remove any remaining small objects or debris that the chemical mixture might have caught while cleaning your pool.

Vary The Dose

When you’re diluting the pool water with fresh water, you’ll need to vary the dose. The higher the concentration of chemicals in your pool water, the faster the process of killing germs. However, too high a concentration can result in serious damage to your pool.

This is why it’s best to vary the concentration of chemicals in your pool water by adding more or less of it. If you have a pool that’s a couple of feet deep, you might not need to add any at all. But if your pool is more than six feet deep, you might need to add a small amount to ensure that the blood and feces matter that was previously on the bottom of your pool no longer floats to the top where you swim.

Douse The Pool

With fresh water added and the alcohol still wet, it’s time to douse the pool. To do this, you’ll need to cover the entire surface area of the pool with plastic. It’s important that the plastic is not transparent, as this will allow harmful ultraviolet rays to leak through and damage your pool’s internal workings. The most practical and effective type of pool plastic is vinyl. This material is both opaque and resistant to chemicals and water damage.

After dousing your pool with vinyl, you’ll want to remove all clothes and possessions that might come in contact with the water’s surface. This includes towels, washcloths, and even your swimsuit. In most cases, a good old-fashioned towel should suffice. Simply wipe down the area around the pool with your towel to remove any excess moisture. After this, you can move around the pool in peace without worrying about your clothes getting wet or torn.

Before using this method, you’ll need to consult the manufacturer’s instructions to be sure that this is the right solution for your specific pool type and size. Most pool cleaners are designed to be used with specific types of pools and may not be suitable for others.

If you want to use this method, then make sure that the water level is at least two inches below the top of the pool. This ensures that there’s plenty of oxygen present in the water and that it won’t become stagnant overnight.

If you have an above-ground pool, then be sure to check the temperature regularly. This is especially important if you live somewhere cold. If the temperature is above 75 degrees Fahrenheit, then this might indicate that there’s something wrong and you should have it checked out by a professional.

If you’ve followed these instructions and performed this task diligently, then you should find your pool safe and clean again. While this procedure might sound complicated, it really isn’t. Simply follow the steps and you’ll be able to restore your pool to its original condition in no time at all.

To avoid any accidents, it’s essential that you know how to properly sanitize your salt water pool and that you do it frequently. The key to keeping your pool clean is to empty it and refill it with fresh water on a regular basis. With this method, you’ll be able to keep your pool and its water clean and germ-free for years to come.

Do NOT follow this link or you will be banned from the site!