How To Soften Water In A Saltwater Pool? [Answered!]

Spread the love

Many people, myself included, enjoy being in a saline water pool. The soothing nature of such an environment is difficult to put into words; it’s almost like taking a vacation from your cares and woes even if just for a few hours. As someone who is always looking for ways to improve his outdoor living, I decided to investigate how to soften water in a saltwater pool. Specifically, I wanted to find out if there was a way to alter the water’s chemistry such that it would be more suitable for skin contact. Keep reading to find out what I discovered!

The Pros And Cons Of Using Saltwater Pools

One of the main reasons why I enjoy being in a saltwater pool is because it’s extremely easy to maintain. The salt and sand that make up the pool are extremely cheap and readily available, and their presence means there’s always the possibility of disaster (e.g. pump failure, leak, or drought) if you aren’t careful.

On the other hand, if you are planning to use a saltwater pool for therapeutic purposes, you need to be careful about how you handle the water. This is because too much salt will make the water undrinkable, and it can also damage your skin if you get wet. It’s best to keep your skin covered when around the pool to prevent any potentially dangerous situations.

Another important thing to consider if you are using a saltwater pool for therapeutic purposes is the pH level. The pH of the water affects the way your body deals with food; the higher the pH, the easier it is for your body to process nutrients. Ideally, you want your body to be in a slightly alkaline state (pH levels 7.2-8.4), which is why most spas don’t use their pool water for drinking. In an acidic environment (pH levels below 7.2), your health can deteriorate quickly due to the lack of necessary nutrients.

Nowadays, most spas realize the importance of keeping the water alkaline, so much so that some will even adjust the pH level of their pool via special chemicals. The advantage of using such chemicals is that it makes cleaning the pool much simpler and less labor-intensive. The disadvantages, as you might imagine, are related to the potential for overdependence resulting in undesirable side effects as well as the cost involved in buying and maintaining the necessary chemicals.

What Is The Best pH Level For A Saltwater Pool?

The pH of saltwater is dependent on a number of factors, including the salinity of the water and the amount of time it has been sitting before use. The amount of time it has been sitting before use is referred to as the “age” of the water, and the higher the age is, the lower the pH level will be. The pH level of fresh water is around 7.5-8.0, and that of salt water from the coast is around 6.5-6.8. Oceans offer a wider range of pH values due to the presence of different minerals in the water. The pH level of water can also be affected by how it is treated before being put into the pool. Chlorinated water, for example, will have a lower pH level than freshwater due to the presence of chlorine.

Based on the foregoing factors, it is clear that the ideal pH level for a saltwater pool should fall within the following range: 7.2-8.4. Values outside of this range, particularly below 7.2, can seriously damage your skin.

How Do You Keep The Water Fresh?

The most critical factor in keeping your pool’s water fresh is by replacing it regularly. If you are in a colder climate, it is advisable to let the water cool down before use to around 75 degrees Fahrenheit. The reason behind this is that the colder the water is, the less the nutrients will remain in it. This means that you will have to replace the water more frequently.

It is also important to regularly clean the pool. This can be done by getting out the gunk at the bottom of the pool with a vacuum or by using a pool cleaner with a soft brush at least once a week. Regular cleaning also helps maintain the health of the water by eliminating harmful bacteria and algae that could otherwise grow unchecked and contaminate the pool.

How To Soften Water In A Saltwater Pool?

There are several ways you can soften water in a saltwater pool, and they all depend on you getting rid of the excess salt that is in the water. The simplest and arguably the most eco-friendly way is to simply change the pool’s water more often. As mentioned earlier, too much salt will make the water undrinkable. The second option is to use a water softener, which is a device that helps remove some of the hardness from the water. It does this by applying electrical charges to the water, essentially preventing any damage to the skin and reducing the need to change the water so frequently. The disadvantage of this option is that it requires a continuous power supply which, in turn, leads to increased energy consumption.

The Top Three Ways To Soften Water In A Saltwater Pool

Even though changing the water is the simplest and probably the most sustainable option, it’s not always the most convenient. One other option that is almost as good (and perhaps even more eco-friendly) is to use a water pump, which is an automated device that gets the water directly from the ocean or a lakeshore. The downside to these types of water sources is that they can be quite expensive to operate, particularly if you are drawing water from a considerable distance. The last and arguably the most reliable way to soften water in a saltwater pool is to use gravel filters.

Gravel filters are a type of filter that consists of tiny pebbles or gravel that assist in removing impurities from the water. When using such filters, it’s important to remember that the water needs to be constantly changed to ensure that the gravel at the bottom of the pool isn’t blocked by any debris or gunk. If this happens, the efficiency of the filter will be reduced, and it could even become damaged. Just make sure you always clean the pebbles at the bottom of the pool after each use to avoid any potential problems.

Which Is The Best Type Of Filter To Use In A Saltwater Pool?

If you are planning on using a gravel filter in your pool, it’s important to note that they come in different shapes and sizes. The key criteria you need to consider are the size of the opening in the filter as well as the filtering efficiency. The larger the opening, the more efficient it will be at capturing large particles. On the other hand, the smaller the opening, the more filtering efficiency you will achieve.

The best type of filter for use in a saltwater pool is one that has an outer diameter of about two inches and an inner diameter of about one inch. This ensures that it has enough room to capture all the impurities present in the water while avoiding any potential clogging issues.

Do The Guidelines For Safe Swimming Still Apply?

Since your pool is connected to the ocean, it is important to ensure that you have all the necessary life vests and equipment to make the most out of the experience. One of the most critical things you need to consider is whether or not the guidelines for safe swimming still apply in your situation. For instance, if you are going a short distance with no current (e.g. around the pool or at the beach), then the rules for safe swimming might not be as restrictive as you think. This is because the current in your pool will not pose any danger to your health. The same goes for at the beach; while there is a current, it will not harm you in the slightest. However, if you are going any length beyond what is recommended, then you should definitely wear a life jacket.

Do You Need To Test The Water Before Using It?

As a responsible owner of a saltwater pool, it’s important to ensure that the water you are using is clean. This is because the water you are using is directly connected to the ocean and, as such, it will inevitably be mixed with various types of debris and potentially harmful organisms. If you are planning on using the water for any reason (e.g. for swimming or drinking), then it’s essential to test it first.

One way of testing the water is by trying a simple float test. Simply take a container and a few inches of water, place the container in the water, and let it sit for about 10 minutes. If the liquid inside the container remains at the surface for more than 10 minutes, then the water is contaminated and you should treat it accordingly. Fortunately, this is a simple test to perform and the results are usually obvious. Just make sure you have a proper pair of goggles as well as swimsuit and wet suit in case the water gets cold.

Do NOT follow this link or you will be banned from the site!