How To Treat Spa Pool Water? [Solved!]

Spread the love

There have been several instances of people being infected with a water-borne parasite after being in a spa pool. While the majority of people recover fairly quickly, there are some serious cases where the parasite affects the central nervous system and causes long-term health problems. Because of this, it is important to know how to treat spa pool water if you want to be sure that you and your family are safe after being in a spa pool.

Drain The Pool

The first thing you should do after getting out of the pool is to drain the pool. This should be done by turning on the water tap at the pool’s edge and allowing the water to flow out. Wait until the water ceases coming out in a steady stream and then turn off the tap. Some pools have a drain plug that can be removed for this purpose. If the pool is not equipped with a plug, then there should be a valve near the top or side of the pool that can be opened for draining purposes. If the pool has a shallow end, then there should also be a drain tile there so that spills and splashes do not cause a mess. In addition, be sure that the overflow pipe from the pool’s skimmer is emptied and cleaned regularly. This is usually a simple task that can be done with a little bit of water and detergent.

Clean The Pool

After you have cleaned the drain, you should clean the pool itself. For this purpose, you will need a pump and some kind of a filter. The pump will be used for circulating the water while the filter will remove any remaining dirt and oil from the water. You should also replace the filter every month or whenever the water looks or smells like it is getting dirty again. You can use a gravel vacuum that is fitted with a water-repellent coating for cleaning the pool underwater without having to use an external power supply. Make sure that you wash down the pool walls and floor with a good quality cleaner once you are done cleaning it. A good quality pool cleaner with pH balance should be used for this purpose.

Sanitize The Pool

After you have cleaned and sanitized the pool, you should leave it for a few hours so that all the water molecules in the air are replaced by fresh air. It is good practice to sanitize the pool every day or as often as needed. Regular sanitizing can help keep the water in good condition and prevent germs from reproducing. In some instances, a chlorine dose is added to the pool water to preserve the pool’s integrity. Chlorine is however dangerous to some life styles, including infants and the elderly so be sure that the amount added is safe for everyone in your family.

Protect Yourself

As mentioned above, there have been several cases of people getting sick from water-borne parasites after being in a spa pool. To prevent yourself from contracting a water-borne infection, you should take the following precautions:

  • Wear gloves while cleaning the pool or drain.
  • Drain the pool as soon as possible after using it.
  • Clean the pool with at least a 10% bleach solution before using it.
  • Rinse the area around the pool after cleaning it.
  • Avoid going underwater while in the pool area.
  • Change your swimsuits and shower towels after each use.
  • Use a good quality pool cleaner and ensure that the chemical content is within safe limits.
  • Follow the instructions on the container.

Being in a spa pool is a source of both pleasure and danger if you do not know how to treat the water. With these tips, you will ensure that both you and your family are safe and comfortable in your backyard pool. The cost of one parasite-related hospitalization is about one million dollars, so it is important to take precautions whenever possible.

Do NOT follow this link or you will be banned from the site!