How To Warm Up Water In An Inflatable Pool? [Updated!]

Spread the love

Taking a dip in an inflatable swimmer’s pool is both refreshing and relaxing. The warm water can be therapeutic for aches and pains, and the buoyancy of the pool can promote relaxation and reduce stress. But once you get out of the pool, rewarming the water can be a pain – especially when it’s cold and damp outside!

With a bit of ingenuity, you can avoid the discomfort of the cold by using any of your household appliances to heat the water. This is a list of tips that can help. (1)

Use A Heater, Not A Recharger.

Even the most basic of home heaters can be used for warming water. These appliances are inexpensive, widely available, and can be found in home appliance stores. Some good models will even allow you to set different heat settings to accommodate different temperatures for bathing and cooking.

If your heater was made for use with liquid propane, you can also use it to warm up water for your pool. Just make sure that the temperature does not exceed 210 degrees Fahrenheit, as this could cause permanent damage to your appliance.

Use Lots Of Ice

Although you don’t need an expensive piece of equipment to store ice, having a supply on hand is always nice for those hot summer days when you want to cool off in the pool. But you should know that melting ice can be a slow process, especially if you have a lot of it. So rather than wasting time re-freezing your pool water, you can use this method to quickly warm it up. Simply add ice to the water until it is cool to the touch, and then leave it alone for a few minutes. You can use this process to quickly heat up up to 10 gallons of water.

Use A Water Heater

If your pool is big enough, you could install a water heater in it. This is a great solution for always having fresh, hot water in the pool, as well as for rewarming water after bathing. Installing a water heater in your pool doesn’t require a great deal of space, and it is a relatively inexpensive fix. But you should know that if your pool is not already wired for electricity, you will need to run additional wires to connect the pump and filter to the appliance.

Wrap The Pool Area In A Sheets

When you are rewarming your pool after a swim, the last thing you want to do is expose your body to the chill air. To avoid this, you can cover the area around the pool with sheets to maintain a cozy atmosphere. It would also be wise to cover the patio area surrounding the pool as well, for the same reason. Of course, make sure that the sheets are easy to remove when you want to enjoy the outdoors.

Inspect The Water Heater Regularly

Like any other home appliance, your pool water heater needs to be maintained and cleaned regularly to ensure that it functions properly. Fluctuations in the weather could cause your pool water to become contaminated, and this could lead to serious illnesses. It is also vital that the water is clean when you get it, as any dirt or debris trapped in the tank could cause serious blockages later on. So to avoid any problems, ensure that your pool water is always clean by either running a hose to the fountains or using a simple water filtration system. Cleaning the tank will also prevent future blockages, so it is well worth the effort.

Monitor The Water Temperature

It is essential that the water in your pool is at the right temperature. If it is too hot, you could experience discomfort when taking a swim, and if it is too cold, you could cause serious damage to the water bodies and to yourself. To avoid any accidents, always keep a careful eye on the water temperature and keep it between 75 and 85 degrees Fahrenheit by adjusting the heater or using the heat from the sun. Remember: it’s always better to be over than under!

Consider An Inverter-Powered Pool Heater

An inverter-powered pool heater is a great solution for people who want to avoid having to manually adjust the temperature of their pool. These types of heaters are usually more expensive than corded ones, but they are usually installed in larger pools. They also come with a number of pre-programmed settings, so adjusting the temperature is a simple matter of pressing a button. An inverter-powered pool heater also has the advantage of being environmentally friendly, as they produce less heat than ordinary corded ones.

Use A Float Switch

If your pool is fed by a public water source, there is a chance that the water level could drop, especially during the summer. A float switch could be used to monitor the water level and trigger a warning when it drops below a certain point. Flotation devices could also be used to detect when a person has fallen in, so that help can be summoned immediately without risk of serious injury or drowning.

Monitoring The Water Level In Your Pool

If possible, it would be preferable to have the ability to monitor the water level in your pool. This could be done with a variety of floatation devices, such as duck boards and rafts, although these are not entirely safe in shallow or deep water. In addition to being able to monitor the water level, you could use this feature to detect when someone has fallen in, so that help can be summoned without risk of serious injury or drowning.

As you can see, a number of options exist for heating your pool. Remember to be smart about the weather and use only what is necessary. In the summertime, you can use electric appliances or the sun itself, while in the winter you might want to use a stove or fireplace for heat. In either case, make sure that you are careful not to burn yourself or to overload electrical components, as this could cause serious damage or even ruin.

Do NOT follow this link or you will be banned from the site!