Is It Necessary To Drain Filter On Salt Water Pool? [Updated!]

Spread the love

If you live in a place with heavy rain and flooding problems, you know how important it is to have a sump pump installed in your home. However, sump pumps are not the only thing you need to consider before installing one in your home. There are many other things you need to check before you start plumbing works, and one of them is the filter on your salt water pool. You only need to have a qualified technician check out your pool filter because it’s not easy for anyone to know the right thing to do when it comes to your home’s plumbing. You should not attempt to fix any plumbing issue yourself unless you are certain you have the necessary skills needed to do it safely. Sometimes the simple things you can do for your home’s comfort are the things that will make the biggest difference, and you will be able to tell because they are simple. This is why you should hire a professional to come and take a look at your pool filter and see if it needs to be changed or if it’s just fine the way it is.

Why Change The Filter On A Salt Water Pool?

In most cases, the filter on your salt water pool will be changed at the end of the summer season to ensure that it is always clean and clear of any debris that may have accumulated during the season. Once the season is over, you will detach the pump and remove the dirty filter through the drain hose. You can clean and replace it with a new one, following the same procedure. This ensures that there are no nasty surprises when you turn on the pool’s pump for the first time in the season. It also ensures that you are doing your home a favor by keeping it clean and clear of any debris that may be floating around in the pool. Changing the filter on a salt water pool often needs to be done every year or every other year depending on how frequently the pool is used and the amount of debris that is in it. The bottom line is keeping your pool clean is critical to its long-term health and enjoyment.

Checklist For A Clean Pool:

Before you start plumbing works to install a sump pump or to change the filter on a salt water pool, you need to make sure that all the items on the following checklist are ready:

  • The pool is in good condition and has sufficient electrical power (usually around 20 gallons of water per hour)
  • The pool has adequate lighting (usually either sunlight or artificial light)
  • The pool’s water is at a comfortable temperature (usually around 70 degrees Fahrenheit)
  • There are no leaks or disruptions in the pool’s plumbing (usually requiring the services of a professional)
  • The pool pump is operating properly (usually either a submersible or a surface pump)
  • The pool is not located in a region prone to flooding (usually requiring the services of a professional)
  • There are no snakes or other reptiles present in the area of the pool (usually requiring the services of a professional)
  • Professional help is readily available in the event of an emergency (usually requiring the services of a professional)

If you can complete this checklist without finding any issues, you can be sure that your pool is ready for use and there are no major threats to your home or its comfort. However, it is always good practice to double check everything just to be sure. If you live in Australia, you must also make sure that all the fittings and connections are made according to Australian standard building practices. If there are any doubts or questions, you should call in the services of a professional to come and inspect everything for you.

How Does The Filter Work On A Salt Water Pool?

The filter on your salt water pool stops all the gross stuff from entering the pool at the point it first meets the water. If you have a large pool, you will most likely have a ladder allowing you to access the top of it. Once you are at the top, you will detach the filter from the pool’s plumbing and clean it regularly. This will ensure that water remains clean as it filters through the debris that is trapped in the filter.

The filter media on your pool’s filter is responsible for stopping both large and small debris from entering the water. Some pool filters are equipped with a pre-filter attachment that catches large debris before it reaches the filter media. This is one of the most common sources of leaks in homes with pool filters. It is also the main reason behind the frequent need to change the whole filter unit after only a couple of months of use. The media itself should be changed at least once a month to ensure that it continues to effectively trap small debris.

Is The Filter Cleaned Enough?

It is usually a good idea to test the cleanliness of your pool filter by pouring a cup of vinegar in it. If you pour the cup into the filter, it will react with the water in it and turn into gas. The gas will accumulate at the top of the cup and when you look into it, you should be able to see a small pool of vinegar forming at the bottom of the cup. The volume of the gas will depend on how much liquid you poured into the filter, and this is the reason why you need to test it often to ensure that it is always clean. If you see any signs of rust, mold or other bacteria growing at the top of the cup, you should not use the pool filter and you should call in the services of a professional to clean it for you.

Wash Your Hands Before And After Pouring Vinegar In The Pool Filter.

Before you start any work on your pool filter, you should always clean your hands with water and soap or with an alcohol-based hand sanitizer. This is especially important if you are going to be using sharp tools or if you have just come into contact with any sort of organic matter from the outdoors. Avoid touching any surface around the pool with your hands unless you have cleaned them first, and if you do, make sure to dry them thoroughly with a towel before laying down on any furniture or other surfaces around the pool area.

After you have cleaned your hands, you can pour the cup of vinegar in the pool filter and let it steep for about five minutes before turning the water on. This will help remove some of the chlorine typically found in most pools and give the water a more natural taste. You should always do this at the end of each swimming session, but it is still important to turn the water off and back on at least once a week to ensure that all the chemicals remain fresh.

What About Changing The Filter On A Salt Water Pool Every Week?

If you live in a region with heavy rain and flooding problems, you know how important it is to have your pool filter changed regularly. However, this should not be done too often because while it may be good for the water’s health, it greatly increases the chance of a leak occurring where the filter meets the water inside your pool. For this reason, you should only have your pool filter changed every three months to once a month to ensure that it does not accumulate too much debris that could clog up the drain hole where it meets the water. Changing the filter on a salt water pool often needs to be done every six months to ensure that it continues to effectively stop all the debris from entering the water. This is part of what makes it so important to have a pool vacuum installed in your home. It will quickly and easily remove all unwanted aquatic life that may have accumulated while your pool was off-line during the summer season. If you are ever uncertain about what changes to make to your pool filter, there is an app called Pool Check that can help provide you with an inspection report detailing the condition of your pool’s plumbing.

How Long Has The Pool Been Used?

The condition of your pool’s plumbing will determine how often you need to have it cleaned and what needs to be done to ensure it remains in good condition. If you live in a place with heavy rain and flooding problems, you know how important it is to have your pool filter changed regularly during the season. However, if you live in a place where it snows regularly, you may not need to have the pool cleaned as often because the moisture tends to settle to the bottom and cause fewer issues there. Your pool may also have accumulated some algae at the very top during the season, and this is why you need to clean it thoroughly once the season is over. While it is always a good idea to clean the top layer of algae off your pool’s surface, it is important to remember that the built-up algae is a form of plant life, and it is very nutritious for fish and other aquatic animals. This is why you should not be afraid to leave some algae on your pool’s surface to provide your pool with some much-needed organic matter.

Do NOT follow this link or you will be banned from the site!