Learn How To Easily Drain Your Coleman Pool In 3 Simple Steps

Are you looking for an easy way to drain your Coleman pool without any hassle? Look no further, as we’ve got you covered. Draining your pool is an essential part of pool maintenance, and doing it the right way can help you avoid costly damages in the future.

With our 3 simple steps, you can quickly learn how to drain your Coleman pool without any trouble. Whether you’re a pool maintenance newbie or a seasoned pro, our guide has everything you need to know to keep your pool clean and well-maintained.

In this article, we’ll take you through each step of the process, from preparing your pool to setting up the drainage system and beginning the draining process. By the end of this guide, you’ll be equipped with all the knowledge you need to drain your Coleman pool safely and efficiently.

So, what are you waiting for? Keep reading to learn more!

Step 1: Prepare The Pool

Before you start draining your Coleman pool, you need to make sure that the pool is properly prepared for the task at hand. The first step is to remove any debris or leaves from the surface of the pool using a pool skimmer. This will prevent any clogging in the drainage system. Once the surface of the pool is clean, you can move on to the next step.

After removing debris from the pool, you will need to turn off the pool pump and filter system. This will prevent any damage to the pump and filter while the pool is being drained. Additionally, you should disconnect any hoses or attachments that are connected to the pool, including any pool cleaners or vacuum systems.

Next, you should check the pool’s drainage system and ensure that it is clear and free of any debris. You can do this by inspecting the drainage outlets and removing any dirt or debris that may be clogging the system. You should also make sure that the drainage system is properly connected and in good working order.

Finally, you should make sure that the pool’s water level is appropriate for the task at hand. The water level should be low enough to allow for easy drainage, but not so low that the pool’s structure is compromised. Typically, the water level should be lowered to just below the skimmer box.

Clear The Area Around The Pool

1. Remove any objects that are within a few feet of the pool, including patio furniture, pool toys, and other items. This will ensure that nothing gets in the way while you’re draining the pool.

2. Clean the pool deck to remove any debris or dirt that could be pushed into the pool during the draining process. This will help prevent clogs in the drainage system and make the process more efficient.

3. Check for any leaks or damage to the pool before draining it. If there are any leaks or damage, you’ll need to have them repaired before draining the pool to avoid further damage to the pool or surrounding areas.

4. Turn off the pump and filter system to prevent any damage to the equipment. This will also make it easier to drain the pool, as you won’t have to work around the system.

Clearing the area around the pool is an essential first step to draining your Coleman pool. By taking the time to prepare the pool and surrounding area, you’ll ensure a smoother and more efficient process overall.

Remove Any Debris From The Pool

• Skim the pool surface: Using a pool skimmer, remove any leaves, twigs, or other debris floating on the surface of the pool.
• Vacuum the pool: For debris that has sunk to the bottom, use a pool vacuum to clean it up. Make sure to get all the corners and crevices.
• Brush the walls: Use a pool brush to scrub the sides of the pool to loosen any debris that may be clinging to them.
• Empty the skimmer and pump baskets: These baskets collect debris and should be emptied before starting the drainage process.

By removing debris from the pool, you’ll ensure that it doesn’t clog up your drainage system and make the process more difficult. It will also make cleaning your pool easier when you refill it with water.

Step 2: Set Up The Drainage System

Setting up the drainage system is an essential step to ensure that the water is drained efficiently from your pool. Follow these steps to set up the drainage system properly:

Determine where to drain the water: Make sure to check local regulations and guidelines to determine where you can drain the water from your pool. Choose an area that can handle the volume of water and won’t cause damage to your property or the environment.

Attach the drainage hose to the pump: Connect the drainage hose to the pump and make sure it is tightly secured. The hose should be long enough to reach the draining area without any kinks or bends.

Lower the pump into the pool: Slowly lower the pump into the pool, making sure that the drainage hose stays in place. If necessary, you can use bricks or other heavy objects to keep the pump in place.

Turn on the pump: Once the pump is securely in place, turn it on and let it run until all the water is drained from the pool. Make sure to monitor the process to ensure that the hose doesn’t become clogged or damaged.

Disconnect and store the drainage system: After the water has been drained, disconnect the drainage hose from the pump and store it in a dry, cool place until the next use.

Locate The Drain Plug

Before you can start draining your Coleman pool, you need to locate the drain plug. This is typically located on the bottom of the pool and is used to connect the drainage system to the pool.

Once you have found the drain plug, remove any debris or dirt around it to ensure a proper connection. You can use a cloth or towel to wipe the area clean.

It’s important to note that some Coleman pool models may not have a drain plug. If this is the case, you may need to use a siphoning method to remove the water from the pool.

Attach The Hose To The Drain Valve

After locating the drain plug, it’s time to attach the hose to the drain valve. This will allow the water to flow out of the pool and into a safe area. You can use a regular garden hose to do this, but make sure it’s long enough to reach the desired location.

Make sure the hose is tightly secured to the drain valve to prevent any leaks or spills. If the hose is not secure, you may end up with water all over your yard or patio, which can cause damage and create a slipping hazard.

Consider using a backwash hose if you have one available. Backwash hoses are typically thicker and more durable than regular garden hoses, which can be helpful if you need to move the water over a longer distance.

Place the other end of the hose in a location that can handle the amount of water being drained from your pool. It’s important to avoid draining the water into an area that could be damaged by the excess water flow, such as a neighbor’s yard or a storm drain.

Set Up The Drainage Area

To avoid creating a mess when draining your Coleman pool, it’s important to set up a proper drainage area. Here’s how:

Choose a suitable location: Pick a spot in your yard where the water can drain away easily. Avoid areas that are prone to flooding or close to your neighbor’s property.

Clear the area: Remove any obstacles, such as rocks or sticks, that could block the flow of water.

Set up the hose: Attach the other end of the hose to a drainage area, such as a sewer drain, or position it to drain away from your house.

Monitor the drainage: Keep an eye on the water flow to make sure it’s going where it should. If you notice any issues, adjust the hose or drainage area as needed.

By following these simple steps, you can ensure that your Coleman pool drains smoothly and without causing any damage to your property.

Step 3: Begin Draining The Pool

Turn On The Pump: Turn on the pump to start the drainage process. The water will be pushed through the hose and out of the pool.

Check The Drainage: Check the drainage area periodically to make sure the water is flowing properly. If the water stops flowing, the hose may be kinked or there may be a blockage in the drainage area.

Monitor The Water Level: Keep an eye on the water level as the pool drains. You don’t want the water to get too low, as this can cause damage to the pump.

Turn Off The Pump: Once the pool is drained, turn off the pump and disconnect the hose. Store the hose and plug the drain valve back up to avoid debris from getting inside.

Now that you’ve successfully drained your Coleman pool, you’re ready to clean it thoroughly and prepare it for storage. With these simple steps, you can easily drain your pool without any hassle. Remember to always follow safety precautions and manufacturer instructions to avoid any damage to the pool or injury to yourself.

Open The Drain Plug Valve

Before opening the drain plug valve, make sure that the hose is properly attached to it and that the other end of the hose is placed in the designated drainage area.

Once you have checked that everything is set up correctly, slowly turn the valve counterclockwise to open it. You will begin to hear the sound of water flowing through the hose and out of the pool.

Monitor the flow of water and make sure that it is going smoothly. If the water flow slows down or stops completely, check to see if there is any debris blocking the hose or the valve.

Keep an eye on the water level in the pool and turn off the valve once the water level is below the recommended level for your pool.

Monitor The Drainage Process

Once the pool drainage process has begun, it is important to regularly check on its progress to ensure that everything is going smoothly.

Check the drainage hose periodically to make sure that it is properly connected to the drain plug and that water is flowing out smoothly. If there are any blockages or slow drainage, check for kinks in the hose or debris clogging the drainage area.

It is also important to keep an eye on the water level in the pool. As the water drains out, the pool’s weight distribution can shift, which can cause damage to the pool or surrounding structures. If the water level drops too quickly, it may be necessary to stop the drainage process temporarily and adjust the pool’s position or drainage area.

Finally, make sure to follow any local regulations regarding pool drainage. Some areas may require the drained water to be disposed of in a specific manner, such as through a sewer system or by trucking it to a treatment plant.

Clean The Pool Bottom When Draining Is Complete

Once the pool is completely drained, you will need to thoroughly clean the bottom of the pool. Use a pool brush to remove any remaining dirt or debris. Vacuuming the pool bottom is also recommended to ensure it is completely clean.

Be sure to pay special attention to any stains or discoloration on the pool bottom. These can be removed using a pool stain remover, which can be found at most pool supply stores. Follow the instructions on the product carefully to avoid damaging the pool surface.

After cleaning the pool bottom, rinse it thoroughly with a hose to remove any remaining dirt or debris. Once the pool bottom is clean and dry, you can begin the process of refilling the pool with fresh water.

Common Mistakes To Avoid When Draining Your Coleman Pool

Not Checking Local Regulations: Before draining your pool, check your local regulations to ensure that it is legal to do so.

Draining Too Much Water At Once: Do not drain more than one-third of the pool’s water at a time to avoid damaging the pool’s liner or structure.

Not Properly Storing The Pool Cover: Make sure to properly store the pool cover after draining the pool to prevent damage from sunlight, moisture, or pests.

Not Cleaning The Pool Before Draining: Clean the pool before draining to avoid clogging the drainage system with debris and making the cleaning process more difficult.

Not Checking The Pool Manual Before Draining

Overlooking the pool manual is a common mistake that pool owners make when draining their Coleman pools. The manual contains important instructions on how to drain the pool properly and safely, including specific recommendations for your pool model. Failure to follow these instructions can lead to damage to the pool or even personal injury.

One common mistake is forgetting to turn off the power to the pool before draining it. This can cause damage to the pump or other equipment. Another mistake is not properly preparing the drainage area, such as failing to level the ground or clear any debris that may cause problems.

To avoid these mistakes, make sure to read the manual carefully before beginning the draining process. Take note of any specific instructions or recommendations for your model of Coleman pool. If you are unsure about any step, do not hesitate to contact a professional for assistance. It is better to be safe than sorry.

Tips For Maintaining Your Coleman Pool

Keep your water chemistry balanced: Regularly test the water chemistry and adjust the chemicals as necessary to keep the pH, alkalinity, and chlorine levels balanced. This will help prevent algae growth and keep the water clean and clear.

Clean the pool regularly: Skim the surface of the water and clean out debris from the skimmer and pump baskets. Brush the walls and floor of the pool to remove any algae or dirt buildup. You can also use a pool vacuum to clean the bottom of the pool.

Use a pool cover: Covering your pool when it’s not in use can help keep debris out and reduce the amount of chemicals needed to keep the water balanced. It can also help keep the water temperature stable and prevent water loss due to evaporation.

Maintain proper water levels: Keep the water level in the pool at the appropriate level, as specified in your pool manual. If the water level is too low, it can damage the pump and cause the water to become unbalanced. If it’s too high, it can lead to overflowing and flooding.

Regularly Test And Balance Pool Chemicals

One of the most important aspects of pool maintenance is testing and balancing the pool chemicals. Chemicals like chlorine, pH balancers, and algaecides need to be at the right levels to keep the pool water safe and clean. Test the water regularly, at least once a week, to ensure the chemical levels are balanced.

Invest in a good pool testing kit that can measure pH, chlorine, alkalinity, and calcium hardness levels. These kits are inexpensive and can help you stay on top of the chemical levels in your pool.

If the chemical levels are off, take steps to balance them. Adding chemicals like chlorine, muriatic acid, and sodium bicarbonate can help adjust the levels. However, be careful when adding chemicals and always follow the instructions on the package.

Remember, balanced pool chemicals are crucial for maintaining a clean and safe swimming pool. Don’t neglect this important aspect of pool maintenance.

Clean Pool Filters And Skimmers

Regularly cleaning the pool filters and skimmers is essential for maintaining a clean and healthy pool. Over time, filters and skimmers can become clogged with debris, reducing their effectiveness and potentially damaging the pool’s equipment.

Clean Filters: Backwash sand filters and replace cartridge filters at least once a month to keep them running efficiently. If your pool has a diatomaceous earth (DE) filter, it should be backwashed and recharged with new DE powder every time the pressure gauge rises by 8-10 psi.

Empty Skimmers: The skimmer basket should be emptied once a week to remove leaves, insects, and other debris that can clog the filter system. A clogged skimmer can cause strain on the pool pump, resulting in damage and costly repairs.

Brush Pool Walls: Brushing the pool walls and floor helps loosen dirt and debris, making it easier for the pool filters and skimmers to capture and remove it. Brushing should be done at least once a week to prevent algae growth and ensure the pool remains clean and sparkling.

Schedule Professional Maintenance: While regular maintenance can go a long way in keeping your pool clean, it’s still important to schedule professional maintenance at least once a year. A professional can check the pool’s equipment and chemicals, identify potential issues, and ensure everything is running smoothly.

Cover The Pool When Not In Use

One of the easiest ways to maintain your Coleman pool is by covering it when not in use. This not only prevents debris and leaves from entering the water, but it also helps to retain heat and reduce chemical usage.

Investing in a high-quality pool cover can help you keep your pool clean and save you money in the long run. When selecting a cover, make sure it fits your pool correctly and is made of durable materials that can withstand the elements.

Remember to remove the cover regularly and clean it to prevent dirt and debris from accumulating on top. By taking these simple steps, you can extend the life of your pool and keep it looking great all year round.

Additionally, covering your pool during the winter months can also help protect it from freezing and cracking, which can be a costly repair. By covering your pool, you can avoid unnecessary damage and expenses.

Conclusion

Proper maintenance is the key to extending the life of your Coleman pool and keeping it in top condition. By following the tips outlined in this guide, you can ensure that your pool stays clean, safe, and enjoyable for years to come.

Regular testing and balancing of pool chemicals, cleaning the filters and skimmers, and covering the pool when not in use are essential steps in pool maintenance. Additionally, proper drainage techniques can prevent damage to the pool during winter months.

By avoiding common mistakes like not checking the pool manual before draining, you can save yourself time, money, and frustration. With a little effort and attention to detail, you can enjoy a clean and sparkling pool all season long.

Draining your Coleman pool is a simple process that requires proper preparation and setup. By following these steps and tips, you can ensure that your pool stays clean and well-maintained for years to come.

Before you start draining your Coleman pool, you need to make sure you have all the necessary equipment. This includes a submersible pump, a long hose, and a nearby drainage area where you can safely discharge the water. Make sure to also disconnect any electrical connections and remove any pool accessories such as ladders or slides to prevent any damage during the draining process.

Once you have everything set up, it’s time to start draining the pool. Begin by using a pool brush or net to remove any debris on the surface of the water. Then, turn off the pool pump and filter and remove any remaining water using a sump pump or a bucket. Remember to save some of the water for later use in cleaning the pool or to refill the pool after it has been cleaned.

When the pool is empty, it’s important to clean the pool thoroughly before refilling it. Use a pool cleaner or brush to scrub the sides and bottom of the pool to remove any algae, dirt, or other debris. Rinse the pool thoroughly and let it dry completely before refilling it with water. Remember to use a pool water test kit to check the chemical levels and adjust them accordingly before using the pool again.

Properly draining and cleaning your Coleman pool is crucial to maintaining its longevity and keeping it in top condition. By following these steps and tips, you can ensure that your pool stays clean, safe, and enjoyable for years to come.

Submersible pump, pool brush, pool water test kit.

Frequently Asked Questions