When summer comes, nothing beats the pleasure of diving into a cool and refreshing swimming pool. However, when it’s time to pack up and store your above ground pool, things can get a little challenging. Learning how to fold an above ground pool properly can save you a lot of time, energy, and frustration.
As the fall season approaches, it’s time to think about packing away your swimming pool until next year. If you’re new to owning an above ground pool or you’re tired of dealing with the hassle of folding your pool, we’ve got you covered. With a few simple tips and techniques, you can learn how to fold your pool quickly and efficiently. Say goodbye to the struggle and back pain, and say hello to a stress-free folding experience.
Whether you’re storing your above ground pool for the winter or just for a few weeks, it’s essential to know the right techniques to ensure it stays in good condition. In this article, we’ll show you the dos and don’ts of folding your above ground pool, and we’ll give you some expert advice to make the process as easy as possible.
If you’re ready to learn how to fold your above ground pool without stressing your back, keep reading for some valuable tips and tricks. By the end of this article, you’ll be equipped with everything you need to know to pack up your pool like a pro.
Table of Contents
Save Time and Money with These Pool Folding Tips
If you’re like many above-ground pool owners, folding your pool may seem like a daunting task that requires a lot of time and effort. Fortunately, with the right tips, you can fold your pool with ease and save both time and money in the process.
One important tip is to drain your pool before beginning the folding process. This will make the pool much lighter and easier to handle, and it will also prevent any water from damaging the pool or surrounding area during the folding process. Another tip is to use a cover to protect your pool from dirt, debris, and other environmental factors while it is being stored. This will help ensure that your pool stays in top condition for years to come.
Finally, proper storage is key to making sure that your pool is protected during the off-season. Be sure to choose a storage location that is dry, cool, and free from pests and other potential hazards. By following these tips, you can save time, money, and stress when folding your above-ground pool.
Use a Tarp to Protect Your Pool and Make Cleaning Up Easy
Choose the Right Tarp: When selecting a tarp, make sure it is large enough to cover your entire pool and made of a durable material. Look for tarps specifically designed for pool covers to ensure the best fit and protection.
Secure the Tarp: Use bungee cords or weights to secure the tarp around the edges of your pool. This will help prevent debris and leaves from getting inside the pool and make cleaning up much easier.
Clean Your Pool Before Covering: Before placing the tarp on your pool, make sure the pool is clean and free of debris. This will help prevent stains and damage to the pool lining.
Using a tarp to protect your pool is an easy and effective way to keep your pool clean and well-maintained. By following these simple tips, you can ensure that your pool stays in great condition for years to come.
Choose a reliable friend: It’s important to choose a friend who can commit to helping you with the pool folding process. They should also have some experience with pools, and be able to follow directions. This will make the process faster and easier.
Divide and conquer: Once you have a helper, you can divide the work and tackle different parts of the pool at the same time. This can help speed up the process and make it less overwhelming.
Use the buddy system: Having a friend to help you can make the process more enjoyable and less stressful. You can chat and catch up while you work, making the time go by faster.
Getting help from a friend can be a great way to make the pool folding process faster and easier. Plus, it can be a fun way to spend time together and catch up. Don’t be afraid to ask for help!
Make Sure Your Pool is Completely Dry Before Folding to Avoid Mold and Mildew
If you’re in a hurry to fold up your above ground pool, you might be tempted to start the process as soon as you drain the water. However, this is a mistake that could lead to problems down the road. Before you start folding your pool, make sure it’s completely dry. This means letting it sit in the sun for a few days to allow all the moisture to evaporate. Failure to do so can result in mold and mildew growth, which can damage the pool and create an unhealthy environment.
Once you’re sure your pool is completely dry, you can start the folding process. Begin by removing any remaining water from the pool, either with a pump or by hand. Then, let the pool sit in the sun for a few more hours to dry out any remaining moisture.
If you want to take extra precautions, you can use a towel to dry the pool’s surface. This will help to ensure that all the moisture is removed, and your pool will be ready for folding without any risk of mold or mildew growth.
Make Pool Storage Easy with This Simple Folding Technique
If you’re tired of struggling to fold and store your above ground pool at the end of the season, you’re not alone. Fortunately, there’s an easy solution that will make pool storage a breeze.
The key to easy pool folding is using the right technique. Start by draining your pool completely and removing any accessories. Then, fold the sides of the pool inward until they meet in the middle.
Once the sides are folded in, fold the pool in half lengthwise. Make sure to keep the pool as flat as possible to avoid creating creases that can damage the pool material.
Finally, fold the pool in half again so that it’s in a compact square shape. Store it in a dry, cool place, and it’ll be ready for use when the next swimming season rolls around.
Start by Removing All Water from the Pool
Step 1: Use a pool pump or siphon to remove all water from the pool.
Step 2: Tilt the pool to its side to remove any remaining water.
Step 3: Allow the pool to air dry completely before folding to avoid mold and mildew.
Maximize Your Space: Fold Your Above Ground Pool the Right Way
Above ground pools are a great addition to any backyard, but when it comes time to store them for the season, they can take up a lot of space. Learning how to properly fold your pool can make a big difference in your storage options.
One of the most important steps in folding your above ground pool is to make sure it’s completely dry. Any moisture left in the pool can lead to mold and mildew growth, which can damage your pool and make it smell musty.
Another tip to keep in mind is to use a tarp to protect your pool during storage. This will keep it clean and make cleanup easier when it’s time to use it again.
Finally, consider enlisting some help from a friend or family member to make the folding process easier and faster. It can be a daunting task to tackle alone, but with an extra set of hands, it can be done quickly and efficiently.
If you want to make sure your above ground pool is folded properly, it’s essential to follow the manufacturer’s guidelines. These guidelines will outline the specific steps you need to take to fold your pool without damaging it.
Typically, the manufacturer will provide you with a detailed guide that includes illustrations or videos to help you understand the process. Make sure to read and understand the instructions before you start the folding process.
Following the manufacturer’s guidelines will help you fold your pool safely and efficiently, ensuring that it’s protected during storage and ready to use again next season.
Keep in mind that failure to follow the manufacturer’s guidelines could result in damage to your pool, making it unusable or requiring costly repairs.
Consider Using a Pool Cover to Protect Your Pool During the Folding Process
When it comes time to fold up your pool, it’s important to take precautions to ensure that it stays clean and dry. One way to do this is to use a pool cover. A cover can help prevent debris from getting into your pool and also protect it from the elements.
Before you start folding your pool, make sure that it’s completely dry. Then, spread the cover over the pool and secure it in place. This will help keep the pool clean and dry while you’re folding it up.
When you’re ready to fold the pool, start by removing the cover and folding it up separately. Then, follow the manufacturer’s instructions for folding the pool itself. Make sure that it’s folded up tightly and securely so that it doesn’t take up too much space in storage.
Finally, consider storing the pool and the cover separately to keep them both in good condition. This will help ensure that they’re both ready to use again when the next swimming season rolls around.
Protect Your Pool: The Dos and Don’ts of Folding Above Ground Pools
DO: Follow the manufacturer’s guidelines for folding your above ground pool. Each pool may have specific instructions on how to properly fold and store it.
DON’T: Fold your pool while it’s wet. Make sure it’s completely dry before you start the folding process to avoid mold and mildew buildup.
DO: Consider using a pool cover during the folding process to protect it from any debris or damage that could occur during the process.
DON’T: Rush the folding process. Take your time and be careful not to damage any parts of the pool while folding it up.
Folding your above ground pool can seem like a daunting task, but following these dos and don’ts can help ensure that you do it correctly and protect your pool for future use. Remember to be patient, take your time, and refer to the manufacturer’s instructions for specific guidelines. By properly folding and storing your pool, you can extend its lifespan and avoid costly repairs or replacements in the future.Do Drain All Water from the Pool Before Folding
Prevent Structural Damage: Leaving water in the pool during folding can cause the frame and walls to warp or bend, rendering the pool unusable.
Avoid Mold and Mildew: Standing water can lead to the growth of mold and mildew, causing unpleasant odors and potential health hazards.
Ensure Proper Drying: Without removing all water, the pool may not fully dry, leading to rust and corrosion of metal parts.
Draining all water from the pool is a crucial step in the folding process. Use a pump to remove as much water as possible, and then tilt and shake the pool to eliminate any remaining water.
Don’t Drag or Slide the Pool on the Ground While Folding
Use Proper Lifting Techniques: It’s important to lift the pool properly to avoid damaging the pool and your back. Have a few people help lift the pool, and use your legs to lift, not your back.
Use a Tarp: Place a tarp or plastic sheet underneath the pool before folding it up. This will protect the pool from any debris or rough surfaces on the ground, and also make it easier to slide the pool onto a truck or trailer.
Avoid Sharp Objects: Be careful to avoid sharp objects or edges that could puncture or tear the pool while folding it. If you notice any damage, repair it before storing the pool to prevent further damage.
By following these guidelines, you can help ensure that your above ground pool stays in good condition and is ready for use next season.
Do Keep Your Pool Covered While in Storage to Prevent Damage
One of the most important things you can do to protect your above ground pool during storage is to keep it covered. A pool cover will prevent debris, dust, and insects from getting inside the pool and causing damage or clogging the filter system.
When choosing a pool cover, make sure it fits your pool properly and is made from a durable material that can withstand the elements. A cover with a drawstring or tie-downs can help keep it secure during high winds.
It’s also a good idea to regularly check your pool cover for any tears or damage and make any necessary repairs before storing your pool for the season.
Expert Advice: Common Mistakes to Avoid When Folding Your Pool
Overlooking the Pool’s Condition: Before folding your above-ground pool, ensure that it’s in good condition. Check for any signs of wear and tear or damage, such as holes or punctures, and fix them before folding the pool.
Improper Storage: Storing your folded pool in the wrong place can cause damage to the material or structure. Avoid placing it in direct sunlight or damp areas, and make sure it’s not exposed to extreme weather conditions.
Rushing the Process: Folding your pool properly takes time and patience. Avoid rushing through the process as this can lead to mistakes, such as not draining all the water or damaging the pool during folding.
Prepare the Ground: Before folding your pool, make sure the ground is even and free from any sharp objects or debris that could damage the pool.
Use a Flat Surface: Avoid folding your pool on grass or dirt surfaces, as this can cause uneven pressure on the pool’s frame and lead to damage. Instead, use a flat and solid surface such as a driveway or patio.
Get Help: Folding an above ground pool can be a two-person job. Don’t try to do it alone, as this can increase the risk of injury and damage to the pool. Enlist the help of a friend or family member to make the process easier and safer.
Remember, taking the time to properly prepare your pool for folding and following these dos and don’ts can help prevent damage and prolong the life of your pool.
Don’t Store Your Pool Near Sharp Objects or Tools that Could Damage It
If you own an above-ground pool or an inflatable pool, you know how important it is to keep it in good condition. One way to ensure that your pool stays in good condition is by storing it properly. However, many people make the mistake of storing their pool near sharp objects or tools that could damage it. Here are some reasons why you should avoid doing so:Risk of punctures and tears: When you store your pool near sharp objects such as gardening tools, nails, or screws, you increase the risk of puncturing or tearing the pool. Even a small puncture or tear can lead to significant water loss and render your pool useless.
Damage to the pool’s lining: Sharp objects can not only puncture the pool’s material but also damage the pool’s lining. The lining is essential as it prevents the water from leaking out and keeps the pool in its desired shape. If the lining gets damaged, it will compromise the integrity of your pool, and it may need costly repairs or replacements.
Risk of injury: Storing your pool near sharp objects or tools not only increases the risk of damaging your pool but also the risk of injury. If you have children or pets, they could accidentally trip and fall onto sharp objects, causing injury. Similarly, you or someone else could accidentally bump into sharp tools, causing injury or damage to the pool.
To avoid these potential problems, always store your pool in a safe place, away from sharp objects and tools. Consider investing in a pool cover or storage container to protect your pool from potential damage. By taking these precautions, you can ensure that your pool stays in good condition and lasts for many years to come.Be Sure to Clean and Dry Your Pool Thoroughly Before Folding
Cleaning and drying your pool thoroughly before folding it is an essential step in maintaining your above-ground or inflatable pool. Failing to do so can lead to damage, mold growth, and even foul odors. Here are some tips to ensure that your pool is properly cleaned and dried before folding:Remove debris and dirt: Before cleaning your pool, remove any debris, dirt, or leaves that may have accumulated on its surface. Use a pool skimmer or a soft brush to remove the debris gently. Be careful not to puncture or tear the pool in the process.
Use a pool cleaner: Once the debris is removed, use a pool cleaner to scrub and clean the inside of the pool thoroughly. Make sure to use a cleaner that is safe for your pool’s material, and always follow the instructions on the label.
Dry the pool: After cleaning your pool, it’s crucial to let it dry completely before folding it. Use a clean, dry cloth or a towel to wipe away any excess water from the pool’s surface. You can also leave the pool in the sun for a few hours to dry naturally.
Disinfect the pool: Once your pool is dry, use a pool disinfectant to kill any bacteria or algae that may be present. Follow the instructions on the label and make sure to use the right amount of disinfectant for your pool size. After disinfecting, rinse the pool thoroughly with clean water.
By following these steps, you can ensure that your pool is clean, dry, and free from any harmful bacteria or algae. Properly cleaning and drying your pool before folding it will help extend its lifespan and prevent any potential damage. Remember to store your pool in a dry, safe place to avoid any further damage or mold growth.Frequently Asked Questions
Why is it important to know how to fold an above ground pool?
Learning how to properly fold an above ground pool can be essential to its longevity and overall lifespan. A poorly folded pool can result in creases, tears, and other damages that can render the pool unusable. Additionally, knowing how to fold a pool can make it easier to store, transport, and set up in the future. With proper folding techniques, you can ensure that your pool will remain in good condition and be ready to use again next season.
What supplies are needed to fold an above ground pool?
Before attempting to fold your above ground pool, it is important to gather the necessary supplies. This will include a pool cover, a pump, a pool vacuum, and a pool brush. These items will help you to drain the pool, clean it thoroughly, and prepare it for folding. Additionally, you may need a helper to assist with the folding process, depending on the size and weight of the pool.
What are the steps to folding an above ground pool?
The process of folding an above ground pool can vary depending on the specific model and size of the pool. However, the general steps will include draining the pool, removing all accessories, cleaning the pool thoroughly, and then folding it carefully. This will typically involve folding the pool into quarters, securing it with straps or bungee cords, and then placing it in a storage bag or container. It is important to follow the manufacturer’s instructions for folding and storing the pool to ensure that it remains in good condition.
Can you reuse a folded above ground pool?
Yes, it is possible to reuse a folded above ground pool in future seasons. However, it is important to take proper care when storing the pool to ensure that it remains in good condition. This will include keeping it clean, dry, and free from any sharp objects or debris that could cause damage. Additionally, it is important to inspect the pool thoroughly before setting it up again to ensure that it is still in good condition and free from any damages or defects.
What are some common mistakes to avoid when folding an above ground pool?
When folding an above ground pool, there are several common mistakes that should be avoided. These can include folding the pool too tightly, which can cause creases or tears, or folding it too loosely, which can result in a bulky and difficult-to-store package. It is also important to avoid dragging the pool across the ground, as this can cause damage to the bottom and sides. Additionally, it is important to avoid storing the pool in an area that is exposed to extreme temperatures or moisture, as this can cause mold, mildew, or other damage.