As summer comes to a close, many pool owners are starting to think about the end of the swimming season. If you have an above ground Intex pool, you may be wondering how to disassemble it and pack it away for the winter months. In this article, we’ll guide you through the process in 8 simple steps.
The first thing you need to do is drain the pool water and remove the accessories, such as the ladder, skimmer, and pump. Then, it’s time to take down the pool liner and disassemble the pool frame. Once that’s done, you’ll want to clean and dry the pool frame and parts before packing everything away.
While it may seem like a daunting task, with a little preparation and the right steps, you’ll have your pool disassembled and stored away in no time. So, grab a friend or family member, and let’s get started!
Are you ready to learn how to unassemble your above ground Intex pool? Follow our 8 simple steps to make sure your pool is properly disassembled and ready for storage. Don’t miss out on this essential guide, read on to get started!
Table of Contents
Unassemble Your Above Ground Intex Pool in 8 Simple Steps
When summer is over, and it’s time to close your above-ground Intex pool, you need to know the steps to take. The process of disassembling an above-ground pool may seem daunting, but with the right tools and a step-by-step approach, it can be done easily. Here are five tips to help you unassemble your pool and store it safely until the next summer season.
Step 1: Drain the Pool Water
The first step in disassembling your Intex pool is to drain the water. You can use a submersible pump or a pool vacuum to remove the water. Ensure that you also remove the drain plug and let the pool dry completely before proceeding to the next step.
Step 2: Remove the Pool Accessories
Remove all the pool accessories like ladders, skimmers, and filters. Detach them carefully, and keep them safely in a dry place. Store these items in a location where they will not be damaged by weather or pests.
Step 3: Take Down the Pool Liner
Start by removing the top ring and then take off the cover. Once you have done this, remove the pool liner by detaching it from the frame. You can carefully fold it and store it in a dry place until the next season.
Step 4: Disassemble the Pool Frame
Disassemble the frame and poles of the pool. Ensure that you label each pole and frame piece, so that you can easily reassemble it later. Store the frame parts in a dry place where they will not be damaged by the weather.
Step 5: Clean and Dry the Pool Frame and Parts
Before storing the frame and parts, ensure that you clean them thoroughly. Use a hose to rinse them, and then wipe them dry. Store them in a dry place and cover them to protect them from dust and other elements.
By following these simple steps, you can easily unassemble your Intex pool and store it safely for the next season. Keep your pool equipment in good condition, and you will save time and money in the long run. Don’t wait until the last minute to start disassembling your pool; start early, and enjoy a hassle-free pool-closing experience.
Step 1: Drain the Pool Water
Draining the pool water is the first and most important step to take when disassembling an above ground Intex pool. Before you start, make sure that you have a suitable drainage location for the water. If you have a large enough backyard, you can simply drain the water onto the lawn, but if you don’t have enough space, you may need to use a submersible pump to remove the water.
Begin draining the water by attaching a garden hose to the pool’s drain valve and directing it towards the chosen location. Make sure that the hose is secure and that the water is flowing freely. Depending on the size of your pool and the strength of your pump, this step can take anywhere from a few hours to a full day.
Once the water is completely drained, remove the hose from the pool and put it away. Be sure to keep an eye on the pool as it drains, so that you can quickly shut off the pump if the water level gets too low. This will help prevent damage to the pump and ensure that the pool remains in good condition for future use.
Use a Submersible Pump to Drain the Water
Prepare the pump: Before using the pump, make sure it’s in good condition and clean. Connect the hose to the pump, and place the pump in the middle of the pool.
Plug it in: Plug the pump into a grounded electrical outlet. Make sure the power cord is in good condition, and there are no signs of damage.
Let it run: Turn on the pump and let it run until all the water has been drained. Be patient as it may take several hours to drain the pool depending on its size.
Remove the pump: Once the pool is completely drained, turn off the pump and disconnect it from the electrical outlet. Carefully remove the pump from the pool and place it in a safe and dry location for future use.
Draining the pool water is the first and one of the most crucial steps in the process of un-assembling your above ground Intex pool. If not done correctly, it could lead to damage to the pool or surrounding areas. Therefore, follow the above steps and make sure that you drain the pool water correctly.
Step 2: Remove the Pool Accessories
Once the pool water is drained, it’s time to remove the pool accessories. Ladder, pool cover, skimmer, and return inlet are the common accessories that you need to remove.
Start with the ladder, and then remove the pool cover, skimmer, and return inlet. Make sure to put them in a safe and dry place.
If you have an Intex pump, disconnect it from the pool and remove it. Be careful not to damage the hoses and electrical connections.
Removing the accessories will make it easier to take down the pool liner and disassemble the pool frame.
To unassemble an Intex above ground pool, the first step is to remove all of the pool accessories. The ladder, skimmer, pump, and any other items that are attached to the pool will need to be taken out and set aside. Make sure to detach any hoses or connections from the pool before removing them.
Step 1: Remove the pool ladder and all other accessories that are attached to the pool.
Step 2: Disconnect any hoses or connections from the pool.
Step 3: Place all of the accessories in a safe and dry location for storage.
Step 4: Keep all of the hardware and screws that were used to assemble the accessories in a safe place so they can be easily found when it’s time to reassemble the pool.
Step 3: Take Down the Pool Liner
Step 1: Remove the top ledge of the pool by pulling it out gently.
Step 2: Once you’ve removed the top ledge, you can start to pull the liner out of the pool. Start at one end of the pool and work your way around, folding the liner in on itself as you go.
Step 3: After you’ve removed the liner from the pool, you should fold it up neatly and store it in a dry place until you’re ready to use it again.
Remove the Top Ring or Metal Frame
Once the pool liner is removed, it’s time to take down the top ring or metal frame. For an Intex pool with an inflatable top ring, start by releasing the air valve and letting the ring deflate. Then, remove the ring from the pool and set it aside.
If you have a metal frame pool, start by removing the horizontal beams that hold the pool’s walls in place. Then, remove the vertical legs that support the frame. Be sure to keep all of the frame pieces organized and together for easier reassembly later.
With the top ring or frame removed, you should now be able to easily remove the rest of the pool walls and drain any remaining water. You’re almost done disassembling your Intex pool!
Detach the Pool Liner from the Frame
Once you have removed the top ring or metal frame, it’s time to detach the pool liner from the frame. Start at one end and work your way around the pool. Look for any clips or snaps that are holding the liner to the frame and release them carefully.
Be sure to remove any debris or leaves that may have accumulated between the liner and the frame before you detach the liner. This will help prevent any tears or damage to the liner during the removal process.
Once the liner is detached from the frame, you can fold it up and set it aside. Be sure to inspect it carefully for any tears or holes, and repair them before storing it away.
Step 4: Disassemble the Pool Frame
Remove the Vertical Supports: The first step in taking apart your above ground pool frame is to remove the vertical supports. These are the metal bars that connect the top and bottom rails of the pool.
Loosen the Top Rail: Once you have removed the vertical supports, you can then loosen the top rail of the pool. This is typically done by removing the screws or bolts that hold the top rail in place.
Remove the Top Rail: With the screws or bolts removed, you can then lift off the top rail of the pool. Be sure to carefully set it aside, as you will need to reassemble the pool later.
Take Apart the Bottom Rail: Finally, you can take apart the bottom rail of the pool. This is typically done by removing the screws or bolts that hold the bottom rail in place. Once the bottom rail is removed, you can then carefully disassemble the rest of the pool frame.
Remove the Vertical Pool Posts
Before taking down the vertical pool posts, remove any screws or bolts that are holding them in place. Use a screwdriver or wrench to loosen and remove the screws or bolts. Once the screws or bolts are removed, gently pull the posts out of the ground. If the posts are stuck, use a pry bar or a hammer to loosen them.
Make sure to label each post as you remove it, so you know where it belongs when it’s time to reassemble the pool. If any of the posts are damaged or rusted, you may need to replace them before reassembling the pool.
It’s important to handle the posts with care to avoid damaging them or causing injury. Wear gloves and use caution when handling the posts, especially if they are heavy or difficult to remove.
Once all the vertical posts are removed, you can move on to removing the other parts of the pool frame.
Detach the Horizontal Pool Beams
Step 1: Start by removing any screws or bolts connecting the horizontal beams to the vertical posts. Use a screwdriver or wrench to unscrew or unbolt them.
Step 2: Once all the screws or bolts are removed, gently pull the horizontal beams away from the vertical posts. If they are difficult to remove, use a rubber mallet to gently tap them loose.
Step 3: Continue this process until all the horizontal beams are removed from the pool frame.
Note: Be sure to label each beam with a marker or tape so you know where they go when reassembling the pool.
Disassemble the Bottom Plate and Straps
Step 1: Locate the bottom plate and straps that secure the pool to the ground. Depending on your pool model, there may be multiple plates and straps to remove.
Step 2: Remove the nuts and bolts that secure the bottom plate to the pool frame. Use a socket wrench or pliers to loosen and remove the hardware.
Step 3: Detach the straps from the bottom plate and from any other anchors they may be connected to. Carefully remove any stakes or anchors from the ground.
Step 4: Carefully disassemble the bottom plate and straps, keeping all hardware together for storage. Store the bottom plate and straps in a safe, dry place until you are ready to reassemble your pool.
Step 5: Clean and Dry the Pool Frame and Parts
Once you have disassembled your pool, it’s important to clean and dry all the parts before storing them away for the season. Use a garden hose and a soft brush to clean dirt and debris off the frame and parts. For stubborn stains, you can use a mild detergent and a sponge.
After cleaning, make sure to thoroughly dry all the parts. Moisture left on the metal frame or parts can cause rust and damage over time. Use a clean towel or cloth to wipe down all the parts, and then leave them in a sunny spot to air dry completely.
If you notice any rust on the metal frame or parts, use a wire brush to remove it. You can also apply a rust remover solution to help get rid of the rust. After removing the rust, make sure to dry the area thoroughly and apply a rust inhibitor to prevent future rusting.
Finally, once everything is clean and dry, you can store the parts in a dry, cool place. If possible, store them in their original packaging or in plastic containers to keep them organized and protected until the next swimming season.
Wash the Pool Frame and Parts with a Hose
Begin by setting up your hose and spraying down the pool frame and all parts thoroughly. Use a high-pressure nozzle to remove any dirt, debris, or algae that may have accumulated on the frame and parts. Be sure to spray both the inside and outside of the parts to ensure that they are thoroughly cleaned.
Next, use a soft-bristled brush or sponge to scrub away any stubborn stains or dirt. Be gentle to avoid scratching or damaging the metal. If there are any tough stains that won’t come off with water and brushing, you can use a mild cleaning solution.
After cleaning, rinse everything again with the hose to ensure that all dirt and cleaning solution residue is removed. Dry the frame and parts with a towel or allow them to air dry completely before storing them away.
Regular cleaning of the pool frame and parts can help prevent rust, deterioration, and other damage caused by exposure to the elements. Be sure to clean them thoroughly at least once a year or more often if you notice any buildup or staining.
Step 6: Pack the Pool Liner and Accessories
Gather all accessories – Before packing, ensure all accessories such as pool ladder, filter pump, and skimmer are cleaned and dried.
Drain the pool completely – Make sure to remove all water from the pool and let it dry completely before packing.
Remove the liner from the frame – Carefully remove the liner from the frame and fold it neatly to fit in the storage container.
Place accessories in the container – Once the liner is packed, place all accessories in the container. Keep smaller items like screws and bolts in a small bag.
Seal the container – Once all items are placed in the container, ensure the lid is tightly sealed to avoid any damage during transportation and storage.
Fold and Pack the Pool Liner
Begin by draining any remaining water from the pool and letting the liner dry completely in the sun. Once dry, fold the liner neatly into a compact square or rectangle, being careful not to crease or fold it too tightly.
Place the folded liner into a large plastic storage container or heavy-duty storage bag, ensuring that it is fully covered and protected from any dirt or debris. Label the container or bag with the name of the pool and the year, for easy identification in the future.
Next, gather all of the pool accessories, such as the skimmer, ladder, and pool cover, and clean them thoroughly with a hose and mild detergent. Once dry, pack them securely in a separate storage container or bag, making sure to label it as well.
Finally, store the pool liner and accessories in a cool, dry place, such as a garage or shed, where they will be protected from the elements until the next swimming season.
Store the Pool Accessories Separately
Towels should be washed and dried after use, then stored in a separate cabinet or shelf away from other pool accessories. This will help prevent mildew and mold growth on the towels, and keep them fresh for the next use.
Sunscreen and other lotions should also be stored separately from towels and other pool accessories. These items can leak and cause damage to other items, and can also be affected by temperature changes. A cool, dry place is ideal for storing these items.
Floats and noodles can be stored in a designated area near the pool, but should be kept away from direct sunlight. UV rays can damage and fade these items over time, so it’s best to store them in a shaded area or covered storage bin.
Keeping your pool accessories organized and properly stored can help extend their lifespan and keep them in good condition for years to come. By following these simple tips, you can ensure that your pool accessories are always clean, dry, and ready to use whenever you want to take a dip in the water.
Remember, the key to successful pool accessory storage is to keep everything clean, dry, and separate. By designating specific areas for each item and taking the time to properly care for them, you can extend the life of your pool accessories and make the most of your time in the sun.
So, don’t let disorganized pool accessories get in the way of your summer fun. Use these tips to keep everything neat and tidy, and you’ll be ready for a refreshing swim whenever the mood strikes!
Frequently Asked Questions
What are the tools required to unassemble an above ground Intex pool?
To unassemble an above ground Intex pool, you will need a pair of scissors, pliers, a screwdriver, and a rubber mallet. These tools are required to loosen and remove the screws, clips, and other hardware that hold the pool together.
How do you drain the water from an above ground Intex pool?
To drain the water from an above ground Intex pool, you will need to attach a garden hose to the drain valve on the pool. You can then open the valve and let the water drain out. Alternatively, you can use a submersible pump to remove the water more quickly.
What is the process for disassembling an above ground Intex pool?
The process for disassembling an above ground Intex pool involves removing the top rails and vertical posts, disconnecting the hoses and pump, and then disassembling the liner and support structure. This process should be followed carefully to avoid damaging the pool components.
How do you remove the liner from an above ground Intex pool?
To remove the liner from an above ground Intex pool, you will need to carefully pull it away from the frame and remove any clips or hardware that are holding it in place. Once the liner is free, you can roll it up and store it for future use.
What precautions should be taken when unassembling an above ground Intex pool?
When unassembling an above ground Intex pool, it is important to take precautions to avoid injury or damage to the pool components. This includes wearing gloves and protective eyewear, working carefully to avoid damaging the liner, and using caution when handling heavy or awkward parts.
What should be done with the pool components after unassembly?
After unassembling an above ground Intex pool, the components should be cleaned and dried before being stored. The liner should be folded or rolled up and stored in a dry, cool place, while the frame and other hardware should be stored in a dry, protected area to prevent rust or corrosion.