If you’re a proud owner of an Intex above ground pool, chances are you’re wondering what to do when it’s time to take it down for the season. Whether it’s the end of summer or you’re moving to a new location, disassembling your Intex pool can be a daunting task without proper guidance.
But fear not! With the right tools, preparation, and step-by-step guide, you can easily disassemble your Intex pool and store it safely until it’s time to set it up again. In this article, we’ll go over everything you need to know about disassembling your Intex above ground pool, including tips for cleaning and storage, common mistakes to avoid, and more.
Table of Contents
Breaking down an Intex above ground pool
Disassembling an Intex above ground pool may seem overwhelming at first, but with the right tools and techniques, it can be a straightforward process. Here’s a step-by-step guide to breaking down your Intex pool:
Drain the pool
The first step in disassembling your Intex above ground pool is to drain the water. This can be done using a pool pump or a hose. Make sure to drain the water away from your home and any nearby structures. Once the pool is empty, use a pool skimmer or net to remove any debris, such as leaves or insects, from the bottom of the pool. This will make the disassembly process much easier.
Remove the filter pump
The next step is to remove the filter pump. This is typically located near the pool ladder. First, turn off the power to the filter pump and disconnect the hoses. Then, remove the filter pump from its base and store it in a safe place until it’s time to set up the pool again.
Disassemble the pool frame and liner
- Start by removing the top rail from the pool. This can usually be done by loosening screws or pins with a wrench or pliers.
- Next, remove the vertical posts and legs from the pool. This may require some additional tools, such as a rubber mallet or a screwdriver.
- Once the frame is disassembled, remove the liner from the pool. This can be done by loosening the liner lock, which is typically located near the bottom of the pool.
- Carefully fold and store the liner and frame in a dry place.
By following these steps, you can disassemble your Intex above ground pool with ease. Just remember to take your time and be careful when handling the various components of the pool.
Tools and materials needed for disassembly
Before you start taking apart your Intex above ground pool, make sure you have all the necessary tools and materials on hand. Here are the things you will need:
Screwdriver: You will need a screwdriver to loosen and remove any screws that are holding the pool frame together.
Wrench: A wrench will come in handy for loosening bolts and nuts that are holding the pool structure in place.
Garden Hose: You will need a garden hose to drain the water from the pool before you start disassembling it.
Materials
Tarp: Lay down a tarp or drop cloth on the ground to protect the pool liner from damage during disassembly.
Cleaning supplies: You may need cleaning supplies such as a scrub brush and cleaning solution to remove any dirt or debris from the pool components before storing them.
Optional Tools
Rubber Mallet: A rubber mallet can come in handy for tapping stubborn parts into place or dislodging them.
Power drill: If you have a large pool or are short on time, a power drill can make disassembly go faster.
Having these tools and materials on hand will make disassembly easier and faster. By being prepared, you can avoid frustration and ensure that your pool is properly taken down and stored for the next season.
Preparation before starting the disassembly process
Drain the pool and clean it thoroughly. Before starting the disassembly process, it’s important to drain the pool completely and clean it thoroughly. Make sure to remove any debris or dirt that may have accumulated on the pool walls and floor. A clean pool makes it easier to spot any damages or issues that may require repair.
Take inventory of the necessary tools and materials. Disassembling an above ground pool requires a specific set of tools and materials. Before starting the process, make sure to take inventory of everything that’s needed. Some common tools and materials required for the disassembly process include a screwdriver, pliers, a wrench, a pool cover, and a storage container to store the parts. Having all the tools and materials readily available can save time and minimize the chances of losing any parts during the process.
Steps to follow before starting the disassembly process:
- Turn off the power supply to the pool. Before disassembling any part of the pool, make sure to turn off the power supply to the pool pump and filter. This prevents any accidents or injuries that may occur due to electrical shock.
- Identify and label all the parts. Labeling the different parts of the pool makes it easier to reassemble the pool after the disassembly process. It’s a good practice to use masking tape and a marker to label the parts according to their location.
- Follow the manufacturer’s instructions. Every above ground pool is unique, and the disassembly process may vary depending on the manufacturer. Make sure to read the manufacturer’s instructions carefully and follow them to avoid damaging any parts of the pool.
Additional tips for preparation:
Take photos of the pool before disassembly. Taking photos of the pool before disassembly can help in reassembling the pool after the disassembly process is complete. It’s also a good way to document any damages or issues that may need repair.
Plan ahead for storage and disposal. Before disassembling the pool, make sure to plan ahead for storage and disposal of the pool parts. Some parts, such as the pool liner and filter, may need to be disposed of properly. Having a plan in place for storage and disposal can make the process more efficient and eco-friendly.
Step-by-step guide to disassembling an Intex above ground pool
Preparing to disassemble your Intex above ground pool
Before starting the disassembly process, there are a few things that you need to do in order to prepare. First, you will need to remove all of the pool accessories, such as ladders and skimmers, and drain the pool completely. You can use a submersible pump to speed up the process, but make sure to drain the water away from the pool area.
Tools and materials needed for disassembly
- Rubber mallet
- Screwdriver
- Socket wrench
- Plastic bags for small parts
Disassembling the pool
Step 1: Start by removing the top rails of the pool. Use a rubber mallet to gently tap the rails and loosen them from their position. Once all of the top rails have been removed, carefully remove the top cap of the pool.
Step 2: Next, remove the pool liner from the frame. Use a screwdriver to remove the screws that hold the liner in place, and then carefully detach the liner from the frame.
Step 3: After removing the liner, it’s time to disassemble the frame. Use a socket wrench to remove the bolts that hold the frame together. As you remove each piece of the frame, be sure to keep the bolts and other small parts in plastic bags to avoid losing them.
Cleaning and storage
Once the pool has been completely disassembled, it’s time to clean and store the parts. Use a hose to rinse off any dirt or debris from the frame and liner, and then let them dry completely. Store the parts in a dry, cool place, preferably indoors, to prevent damage from the elements.
By following these simple steps, you can easily disassemble your Intex above ground pool and prepare it for storage. With a little bit of effort, you can keep your pool in top condition for many years to come.
Tips for cleaning and storing your Intex pool after disassembly
Disassembling an Intex above ground pool can be a daunting task, but properly cleaning and storing it afterwards is just as important to ensure its longevity. Follow these tips to keep your pool in top condition for the next season.
Cleaning your Intex pool
Remove debris and drain the pool
- Use a skimmer net to remove any debris floating in the pool, such as leaves or twigs.
- Unplug the drain plug and let the water completely drain from the pool.
Scrub the pool walls and floor
Use a soft-bristled brush to scrub the walls and floor of the pool, focusing on any areas with stubborn stains or algae growth.
Use a pool cleaner
If your pool has a lot of debris or algae buildup, consider using a pool cleaner to help with the cleaning process. Be sure to follow the manufacturer’s instructions carefully.
Storing your Intex pool
Allow the pool to dry completely
- Once the pool is cleaned and drained, let it air dry completely in a sunny spot for a few days to prevent mold or mildew growth.
- Make sure to also let any pool accessories, such as ladder or pump, dry completely before storing.
Disassemble the pool completely
Take apart all components of the pool, including the frame, liner, and any accessories, and store them separately in a dry, cool place.
Store the pool in a safe spot
Store the pool in a secure, dry place away from direct sunlight, such as a garage or shed. Cover the pool with a tarp or pool cover to keep it clean and protected.
By following these tips, you can ensure your Intex pool is properly cleaned and stored for the next season, prolonging its lifespan and saving you time and money in the long run.
Common mistakes to avoid when disassembling an Intex above ground pool
Disassembling an Intex above ground pool can be a daunting task, especially if you’ve never done it before. However, if you take the time to plan and execute the process properly, it can be relatively easy and stress-free. Here are some common mistakes to avoid when disassembling an Intex above ground pool.
Failing to Drain the Pool Completely
Before you start disassembling your Intex above ground pool, make sure that you have completely drained all the water from the pool. Failing to do so can cause water damage to your yard or property, as well as create a breeding ground for insects and bacteria. Use a pump to remove as much water as possible, then use a shop vac or towels to soak up any remaining water.
Here are some tips to ensure that you have drained your pool completely:
- Disconnect the filter pump and remove any hoses.
- Use a submersible pump or siphon to remove the water from the pool.
- Use a broom or brush to sweep the water towards the pump or siphon.
Not Taking Apart the Pool in the Correct Order
Another common mistake when disassembling an Intex above ground pool is not taking apart the pool in the correct order. This can cause unnecessary damage to the pool, as well as make the disassembly process much more difficult and time-consuming. Always follow the instructions provided by the manufacturer for disassembling the pool, and make sure to take apart the pool in the reverse order of how it was assembled.
Here are some tips for disassembling your pool in the correct order:
- Remove the ladder, if applicable.
- Remove the top ring, if applicable.
- Remove the pool cover and/or debris cover.
- Remove the skimmer and return inlet.
- Remove the filter pump and hoses.
- Take apart the pool frame and remove the liner.
Not Storing the Pool Components Properly
Once you have disassembled your Intex above ground pool, it’s important to store the components properly to ensure that they last as long as possible. Not doing so can cause damage to the components and make reassembly more difficult. Make sure to clean and dry all components before storing them, and store them in a dry, cool place.
Here are some tips for storing your pool components:
- Store the pool liner in a clean, dry, and cool place.
- Store the pool frame in a dry and cool place.
- Store the filter pump and hoses in a dry and cool place.
- Store the ladder, if applicable, in a dry and cool place.
- Store the pool cover and/or debris cover in a dry and cool place.
By avoiding these common mistakes, you can ensure that disassembling your Intex above ground pool is a smooth and stress-free process.
Frequently Asked Questions
How do I disassemble my Intex above ground pool?
Step 1: Remove all the accessories from the pool including ladder, skimmer, and pump. Step 2: Drain the water from the pool using a pump or a siphon hose. Step 3: Remove the top rail of the pool by following the manufacturer’s instructions. Step 4: Loosen the bolts that connect the vertical legs to the bottom rail. Step 5: Carefully remove the vertical legs and disassemble the pool liner.
Can I disassemble my Intex above ground pool by myself?
Yes, you can disassemble your Intex above ground pool by yourself if you have the right tools, equipment, and knowledge. However, it is always recommended to have at least one or two more people to help you with the disassembly process, especially if your pool is larger.
How long does it take to disassemble an Intex above ground pool?
The time it takes to disassemble an Intex above ground pool depends on the size of the pool and the number of people helping with the process. On average, it can take anywhere from 2 to 4 hours to disassemble a standard-sized Intex above ground pool.
What should I do with the pool after disassembly?
After disassembling your Intex above ground pool, make sure to clean it properly, especially the pool liner, and dry it completely before storing it. Fold the pool liner neatly and place it in a dry and cool place to prevent damage. Store all the accessories, such as ladder, skimmer, and pump, in a dry and safe place as well.