You have chosen to beautify your backyard with a pool. Now it’s up to you to make sure that the pool stays clean. To do this, you need to understand what chemicals you need to use for treating the water. You will find a number of chemicals at the local pool store, but it’s not always easy to know which ones you need for the right use. There are several stages to the cleaning process, and you want to make sure that you follow them correctly to avoid any nasty surprises.
Table of Contents
Vivid Blue Treatment
The first stage of treating pool water is to use chemicals to make it a vibrant blue color. This color indicates that there are no algae or bacteria present in the water. Typically, this stage is done by adding a few drops of liquid chlorine to the pool. The chlorine will react with the water, forming tiny bubbles that contain disinfecting chlorine gas. The chlorine provides a protective coating for the pool water and keeps it fresh and clean. However, as with any chemical reaction, it’s important to monitor the levels carefully so that you don’t end up with any dangerous byproducts. Too much chlorine can damage the plastic and vinyl lining of the pool itself, so make sure that you add it sparingly and in small quantities until you get the desired effect. Most pool owners monitor the chlorine levels in their pools with a test kit that is easily accessible. If the test results come back positive, then there is too much chlorine in the pool. In this case, you will have to reduce the chlorine levels or replace the liquid altogether and go with a saltwater pool filter instead. This is because too much chlorine can cause damage to the mechanical components of the pool which might lead to serious repair bills. It’s also a good idea to get a pool vacuum cleaner so that you can clean the pool of gross debris such as chicken bones, which tend to accumulate over time as you’ll see when you use the appliance regularly.
Algae And Bacteria Treatment
After you have achieved the desired blue color in your pool, you need to proceed to stage two and treat the water with chemicals to eliminate algae and bacteria. You will use various compounds as chlorine alternatives, such as aluminum sulfate, copper sulfate, or sodium dichloroisocyanurate (SDI). If you decide to go this route, then you will need to take some time to find the right balance between the various types of chlorine-based chemicals so that your pool stays clear of algae and bacteria for as long as possible. Most algae and bacteria are attracted to sunlight so by keeping the sunlight away from the pool and by using a pool cover to shield it from the sun’s rays then you will be able to keep the water clean. If you don’t have the time to keep an eye on algae and bacteria or if you’d like to minimize the amount of chemicals in the pool then you can use an algaecide to eliminate it once it forms. Most algae and bacteria are organic compounds, so they are attracted to and fed by things such as pet urine and sunscreen chemicals which are often present in water supply lines. If you discover any of these chemicals in your pool, then it’s a good idea to get rid of it as soon as possible.
Water Testing And Adjustment
The last stage of treating pool water is to test it for clarity and adjust the levels of the various chemicals as needed. The fact that you have a clear pool water indicates that either you are using the right chemicals or that there is little to no contamination. In the first case, you can proceed to the next step which is re-stocking the pool with fish and other animals. In the second case, you will need to test for and adjust the levels of various chemicals to maintain a crystal-clear pool.
If you decide to keep a closer eye on your pool’s water level throughout the year then you can use an automatic pool pH/alkalinity tank which will automatically check for and adjust the pH and alkalinity of your pool as needed. This way you will avoid any unpleasant surprises such as foul-smelling water or an unusually high PH level which can cause significant damage to your pool’s mechanical equipment and affect the health of your fish and water fowl. Keeping a close eye on the levels of chemicals in your pool is both challenging and rewarding at the same time. It’s rewarding because you will see immediate results as soon as you start using the right chemicals and it’s challenging because you have to keep track of the various levels to make sure that they stay at the right levels. Even then, it is not always easy to find the right chemicals to achieve the desired results, especially if you don’t have much experience with pools or if it is your first time designing or building one. Fortunately, there is an answer to all of this which is readily available to help you take the mystery out of treating your pool with chemicals and get on with your day. The answer is a pool store. At a pool store, you can get all the equipment and chemicals you will need without having to worry about whether or not they are compatible with each other. If you are new to the world of pools, then it can be difficult to know where to begin, but at the end of the day, you’ll be glad you decided to treat your pool with chemicals because the end result will be worth it.