What Does High Ph Pool Water Do? [Facts!]

Spread the love

You’re swimming in the pool, having a great time, when all of a sudden, your pool turns red.

You ask the lifeguard, and he tells you that the water has high PH (>8.5) levels. Your heart sinks. You knew that the water was clean before you got in, but now you’re afraid that you’ve been poisoned. You splash out of the pool and rush home. You tell your spouse about how the water turned red, and you both decide that you have to get out of there. You contact the health department, and they tell you that the water is safe to swim in.

This scenario sounds ridiculous, but it’s actually a very real danger for swimmers. Even though most pools are chlorinated and free of gross bacteria and parasites, there are times when the water quality is not up to par. If you live in a region where there are a lot of chemicals and manufacturing plants, then this is something you need to be aware of.

Not All Ph Levels Are Created Equal.

When they say the water is high in PH, that doesn’t necessarily mean that it’s dangerous. There are different degrees and types of PH levels, and not all high PH levels are created equal. Let’s take a closer look at what PH is and why it’s important.

What Is PH?

PH is an abbreviation for “power of hydrogen”, which gives you a rough idea of what it is. Basically, it’s a measurement of the acidity or alkalinity of water. The lower the PH level, the more acidic (or basic) the water is. The higher the PH level, the more alkaline (or acidic) the water is. Keep in mind that the alkalinity of the water can also impact the pH levels, so it’s important to measure both at the same time. Most pools have a pH level between 7.2 and 8.4, which is considered “neutral” pH (see below for more).

Why Is The PH Level Important?

The PH level of pool water is important for a variety of reasons. First and foremost, the health of your skin and eyesight depend on it. Chlorination byproducts, such as chlorine and chloramines, change the PH level of the water. These chemicals are extremely dangerous to humans, plants, fish, and animals. When it comes to human health, scientists have determined that there is an optimal pH level for drinking water. Studies have shown that excessive acidity or alkalinity (outside of this optimal pH range) poses serious threats to human health. The American Medical Association and the United States Environmental Protection Agency both recommend that the pH level of drinking water be between 6.5 and 8.5.

This is why pool water that is too acidic (or basic) needs to be corrected by adding acid or base to it – even though this may temporarily decrease the chemical’s impact, it won’t solve the problem. The pH level of pool water will continue to rise, threatening the health of anyone who drinks it. Another very real danger that you need to be aware of is algae growth in the pool. Since algae can absorb nutrients from the water, it can quickly become thick and green in appearance. This might not be an alarming sign at first, but if you notice that your pool is growing algae even after you’ve had it serviced, then this probably means that the water is too alkaline (or acidic) and needs to be changed. Some signs of algae growth include a musty smell and discoloration of the water. This is why it’s best to monitor and test the pH level of pool water regularly, even if you’re not seeing any visible signs of algae growth.

PH And Alkalinity Together

When they say the water is high in PH, they are referring to the alkalinity as well as the PH level. When you add up the alkalinity and the pH level of the water, you get a total alkalinity (in milliequivalents, mEq) (equivalent to alkalinity). For example, if the pH level of the water is 7.0 and the alkalinity is 18 mEq/L, then the total alkalinity is 28 mEq/L. Keep in mind that the pH and the alkalinity of the water are related – the higher the pH level, the greater the alkalinity. This is why it’s important to check both.

How Is PH Measured?

The PH level of pool water is usually checked using a colorimeter, which measures the acidity or alkalinity of the water. The pH level of the water can be found using a combination of the two. If you don’t have a colorimeter, then you can use a pH meter to test the pH level of the water. These items are fairly inexpensive (less than $20 each), and they’re widely available at most hardware stores and swimming pool supply shops. Make sure to buy the proper calibration kit for the brand and model of the pH meter you have.

What Is The Optimal PH Level For Swimming Pools?

Based on the available evidence, the optimal pH level for swimming pools ranges from 6.5 to 8.5. Below 6.5 and above 8.5, the risks to human health begin to rise, especially if the water is heavily chlorinated.

Keep in mind that there are different types of acids and bases that can impact pH levels. The most common culprits behind low pH levels are nitrates and phosphates, which are naturally occurring substances that can accumulate in the water supply. There is also sometimes an excess of calcium (in the form of calcium carbonate) that can contribute to lowered pH levels. As mentioned above, excessive acidity or alkalinity can pose health risks to humans and other living creatures, and this is why you need to keep the pH level of your pool water within this range if you want to stay healthy and safe while enjoying your time in the pool.

The higher the PH level, the greater the risks to human health. If you want to learn more, then you can consult the relevant studies in the literature, which are available online. Remember, the safety of your children and pets is also at risk, so always make sure to protect them from getting too close to or touching the water, especially if it’s hot. If you want to test the pH level of your water without using a meter (for example, if you want to test it regularly and don’t have a colorimeter), then you can use litmus paper to determine whether or not the pH level is in the acceptable range. Just keep in mind that this is less accurate than measuring the pH level with a colorimeter.

Some General Pool Water Safety Tips

Even if your pool is perfectly clean and meets all of its safety requirements, there are still some basic safety measures that you need to take before you start swimming. First and foremost, you need to ensure that the pool area is well-maintained and that any necessary repairs are being handled properly by a professional service provider.

Additionally, make sure to wear proper swimming attire, which includes a swim cap, goggles, and a properly fitted swimming suit. These items will protect you from overheating in the event of an accident or illness, and they’ll also keep you cool while underwater. The health department or swim club you are affiliated with may also have additional rules and recommendations for you to follow. It’s always a good idea to consult the pool’s rules and regulations, especially if you’re not familiar with them.

As you can see, the PH level of pool water is only one of many factors that need to be considered when deciding whether or not to swim in it. There are many pros and cons to swimming in a particular pool, so make sure to weigh all of the potential risks before you make a decision. If you’re not sure where to begin your research, then you can contact a reputable pool safety agency to get the ball rolling.

Do NOT follow this link or you will be banned from the site!