Why Pool Water Is Cloudy? [Ultimate Guide!]

Spread the love

It’s pretty standard for the water in your swimming pool to be crystal-clear, but that’s not the case for everyone. In this blog post, we’ll discuss the various causes of pool water cloudiness, along with some solutions that may help you avoid or at least minimise the effects.

The Sun Is Shining

Let’s start with the most obvious reason for pool water cloudiness: the sun is shining. The rays of sunshine are heating up the water in your pool, resulting in vapour. You may not even notice the effects of vapour except for in warmer climates, where the heat of the day starts to take its toll, along with the glare from the sun, reducing the pool’s clarity.

The best way to combat this is to reduce the amount of time the sun is shining on your pool. Do this by closing the blinds or covering up the windows with a sheer curtain. You could also build a roof to shade the pool area from the sun’s intense heat, and if possible, install a retractable roof that can be closed when required.

The Water Is Dirty

Another major cause of pool water cloudiness is the build-up of dirt and debris around the pool’s perimeter. When it rains or snows heavily, the dirt runs off and winds up in the pool, coating the surface with a thick layer of grime. This is why it’s important to keep your pool clean of any clutter, which may include toys, shoes, hats, etc. The build-up of dirt around the pool’s edge will also affect the clarity of the water.

If you think that your pool’s water is getting dirty due to oil or food spills, then you should consider cleaning it with the right equipment. There are various pumps that can be used for sucking up the water, along with filters to catch any small particles, making it easier for you to enjoy your pool without worrying about your health in the process.

Algae Has Grown Thicker Than Before

Many different algae species can grow in your pool, some of which are beneficial for the pool’s environment, while others are considered nuisances, causing staining and a bad taste in water. One of the biggest algae culprits is pond slime algae, which is what you get when there’s not enough sunlight for all the plants and animals in your pool to survive. As a result, a slimy, yellowish-greenish scum starts to form around the pool’s perimeter, along with some spots swirling in the water, which also become stained, affecting the pool’s clarity.

The best way to combat this is with a pool vacuum, which can suck up all the algae floating in the water. If you don’t have one, then you should consider getting one, as they are beneficial to have around the pool area, particularly if you use chemicals to maintain the pool’s water.

Shade Is Important

Just because the sun is shining doesn’t mean that you need to sit in the pool and let it bake you. If you live somewhere cold, then the best way to beat the heat is by using some shade, like a large tree or building, to reflect the sun’s rays away from you.

This is why it’s important to keep your pool area clean of any clutter. Not only will it make the water look more appealing, but it will also reduce the glare that can cause problems for the people around you, especially if they have sensitive eyesight.

If you live in a region where the sun is always shining, then you may need to consider installing awnings along the pool’s exterior, to provide some shade. If possible, consider getting a retractable shade, so that you can easily pull it down when required. This way, you can enjoy the pool’s cool atmosphere while also being safe from the sun’s heat.

The Water Is Too Cold

Your pool’s water should be a comfortable temperature for you to dive into, regardless of whether you live in a cool or warm climate. That way, you can always enjoy your pool and its surroundings without feeling off-put by the temperatures.

Water that is too cold or too hot can cause health problems for you and your pool, particularly if you’re not used to the temperatures or if they fluctuate greatly. When the water is cold, it can cause frostbite, while at very hot temperatures, it can be extremely painful to swim in. The best way to maintain the right consistency for your pool’s water is by keeping a constant temperature in mind whenever you use it, along with some extra-shade in the form of a roof or a building.

If you suspect that your pool’s water is either too cold or too hot, then you should consider getting a thermostat-controlled pool heater, which can raise or lower the water’s temperature according to your preference. Some heaters also come with built-in filters and UV lights, making them easier to use and maintain.

Chemicals Are Affecting The Water’s Quality

It’s sad to see a pool’s water become cloudy due to chemicals. All it takes for this to happen are a few drops of cleaner in the pool, which, over time, will damage the ecosystem. Chemical-free pools are great for the environment, along with being pleasant-tasting beverages for the humans around it.

Most people don’t realise how harmful chemicals are to the pool’s ecosystem. These chemicals will accumulate over time around the pool’s perimeter, as well as wind up in the water, affecting the clarity and taste of your pool’s drinking water.

To remove these toxins, you should consider getting a water filtration system, which is designed to trap and remove most of the chemicals found in water. Some people prefer drinking water that is unfiltered, but with a water filtration system, you can be sure that your pool’s water is safe to drink.

Dissolved Gasses Are Affecting The Water’s Appearance

If you live in a place where the air is thick with pollution, then it’s not uncommon for your pool’s water to become hazy due to the presence of dissolved gases. CO2, for example, can quickly fog up your pool’s water, reducing its transparency.

These gases will dissolve in the water over time, resulting in a gradual clouding of the pool, along with some spots of discolouration. To reduce the amount of gases that dissolve in your pool, you should consider getting a carbon filter along with a pool vacuum. The filter will trap the gases as they enter your pool, while the vacuum will draw them out, making the water clear once more.

In addition to gases, your pool’s water can become cloudy due to the presence of various organic particles. These particles are often the result of garden clippings, which, when exposed to the sun’s rays, will begin to disintegrate, resulting in small debris that winds up in your pool, along with some stains from the decomposing matter.

To remove these particles, you should consider getting a pool vacuum with a built-in filter, as it will trap and remove most of the particles as they enter your pool. The built-in filter will also reduce the amount of dust that is drawn into the pool along with the water, making it easier for you to enjoy your pool without worry.

Light Is Affecting The Water’s Appearance

Just because the sun is shining doesn’t mean that you need to keep your pool shaded all the time. If you live in a region where there isn’t a lot of sunlight, then you may need to open up the pool area to allow some light in, which will in turn affect the pool’s clarity. When light is reflected into your pool, it can cause a slight hazing effect that reduces the water’s transparency.

To counteract this, you should consider getting a pool shield, which will diffuse the light entering your pool. If possible, get one that is made of several layers of tinted glass, which will protect your pool from the sun’s direct rays while also allowing some light in, improving the water’s clarity.

Algae Is Growing On The Surface Of The Water

Just because the water in your pool looks cool and refreshing doesn’t mean that it’s free from contamination. Depending on where you live, there may be algae present in your pool, which is why it’s important to keep an eye out for it.

Do NOT follow this link or you will be banned from the site!